Your cart is empty.
Your cart is empty.Product Description
Kixfwpy Newly Upgraded Touch Screen for Cadillac 2013 to 2020 CUE Touch Screen Replacement
- Using Newly Upgraded Chip, It can Suitable for 2013-2020 Cadillac CUE Touch Screen Replacement, Solves the confusion of consumers when the vehicle is manufactured in different years. It’s no need to check the part number of CUE Version.
- Gel-Free Touch Screen Solves these problems of old gel based screen: cracked/spiderweb screen, unresponsive, random touch and screen aged.
- With New material, The Touch Screen is High hardness, anti-scratch, Not afraid of sun exposure, clear screen and long-lasting.
- Touch sensitive with upgraded sensor seingupport, make a good experience.
Compatible with: ( No need to check the part number )
2013-2016 Cadillac SRX
2013-2020 Cadillac XTS
2013-2020 Cadillac ATS ATS-V
2014-2016 Cadillac ELR
2014-2020 Cadillac CTS CTS-V
2015-2020 Cadillac Escalade/ESV/EXT
Key Features of Kixfwpy Touch Screen
Newly Upgraded Chip
Widely compatibility with 2013-2020, it's no need to check module part number, starts with 2 or 8 both are suitable
More Stable and Long-Lasting
Touch Sensitive and Clear Screen
Double layer protection
Protect the Screen anti-Scratch
Replacement Old CUE Touch Screen Display when Following Problems happening:
Cracked or Spiderweb
Random touches-automatically operating itself
Unresponsive Touch
Screen aged
Installation Precautions
Installation:
- Read the manual carefully first and Pay attention to the precautions
- Checking the install video
- Be careful of the cable when removing and installing the screen
- Please be patient when install screen
Troubleshooting of Installation:
- The inner film of the screen was not torn off, resulting in no response to touch and blurred screen
- During installation, the screen cable is not fully inserted into the unit, resulting in didn't work
Note:
When your cadillac car is ATSL and XTS in 2018 or 2019,when you replace the screen and the touch does not respond or the cue system freezes,need you plug CUE System into the car, turn off the car, get out of the car and close the door, and then start the car after 15 minutes, restart the CUE system , then check the screen touch response;
Another method is disconnect the battery cable, reconnect the power after 5 minutes, then check the touch response. (please pay attention to safety when connecting the battery cable)
Analysis of common problems after installation
If The Screen didn't work after installation
Please check the white cables inside the unit, it is connect with LCD Screen, that disconnct probably result in the screen didn't work.
If The Screen no display after installation
The white cables disconnect with unit,
Don't touch any White Cables inside the Unit, which result in the screen no display
If Screen touch is useless after installation
Please Install the ribbon cable correctly,
- please keep it always straight in
- Black side up, Gold pins down
- Be careful with the locking clip and ribbon cable, they are easily damaged.
Quality inspection
John Cekala
2025-08-30 20:22:24
Perfect!Read instructions several times, watch several videos first. Take your time, this is not a contest. I'm a retired professional mechanic and spent four hours start to finish. Break the process into four smaller steps, remove unit from car, disassemble unit and remove old touchscreen, install new touchscreen on unit, test for proper operation and response, then reassemble the remaining parts of the unit and re-install in car. The printed instructions are perfect, clear, highly detailed, use them. I used all manual tools, no power tools. A long12 inch #1 Phillips is a must have, along with a 7mm socket. Hint: install the new touchscreen center screws first loosely and work your way out, the screen will align on all the tabs then tighten all the screws evenly. Do this on a work bench not your lap in the car. Powered up with no problems at all. Exact fit and finish worthy of a Caddy!!!!
Ray R.
2025-08-28 15:50:42
I installed the screen and it worked perfectly. No problem whatsoever and it looks exactly like the original. The included tools are of good quality and were very useful. I know there are more expensive options for this screen but I suspect there is only one company manufacturing these. YouTube is your friend and you should be able to find a video for your specific vehicle model.
Canon
2025-08-10 16:17:08
I read so many offerings on eBay and Amazon and it was difficult to make a choice. I gave in and bought this one, I am so glad I did. I purchased for a Cadillac ATS 2015 and this fits perfectly well. After watching a YouTube video or two, I didn't have any problem replacing the old cracked screen display with this one.
Dan Martin
2025-06-22 16:28:53
Excellent so far. One of the last reassembly steps is to place the "ribbon cable" from this screen into the CUE's connector. It is not easy because your fingers can't fit where the plug is. That's why everyone's using tweezers to get the cable in. What I found remarkable here was that the cable was pre-warped to make the difficult 90-degree bend into the connector. Another screen I tried installing (before ripping the cable by accident and having to get this one) had a cable that was biased straight ahead; imagine having to tweeze or use screwdrivers like chopsticks to twist a cable that doesn't want to be twisted 90 degrees so it'll land in a socket that you can't even see. With this screen, as I said, the cable was pre-conditioned to make that bend so I nudged it into place and it stayed there, to my delight. I primarily chose this (with some nudging from Amazon saying it is Amazon's choice) because it is a no-gel screen; it's the expansion of gel in hot weather that caused the stock ones to crack in the first place. I've had it in for a few hours. The job takes time and is not fun. It's nice when it's over. If I have any failures of the product, I'll update.
steven marston
2025-04-24 11:40:03
I took it to the shop to get it installed.I was unsure if I could do it with my skills.Once it was installed, it worked like a dream.
John MCkenzie
2025-04-19 14:17:12
On time and works great
ttb
2025-04-09 11:43:35
Great product, just as advertised, came with the tools it said it would come with. The online tutorials are good, but this is not an easy fix and it took me 3 total hours. take your time when putting all the parts back onto the car after you've replaced the screen.
M.gh
2025-01-18 11:39:00
thank you!! I was amazed, high quality item like the original , installed on my 2018 Escalade esv my self and saved over $1,500
Recommended Products