Your cart is empty.
Your cart is empty.Product Description
Automatic Touchless Bathroom Sink Faucet
- Type:Automatic Sensor Faucet
- Installation:Deck Mount On under counter basin,1 or 3-hole 4" installation
- Handles Number:Touchless
- Material:Brass
- Core Valve:Solenoid Valve
- Water Type:Cold&hot Water
- Finish: Oil Rubbed Bronze
- Pop up drain include: No
- Cover Plate include:Yes
- Removable Deck Plate: Yes
- Automatic sensor bathroom faucet: motion sensor bathroom faucet by your hands
- Temperature adjustable:You can adjust water temperature with the temperature mixer according to your preference. Hot and cold hose, temperature mixer are included.
- High quality and durable : Black finished solid brass construction for reliability and long lasting performance. Multi-layer finishing process; stunning looks
- Waterfall Spout:Smooth and clear laminar stream
- Overall Height :5.7inch
- Spout Reach:4.3inch
- Spout Height :3.9inch
- Deck Plate Length:6.5inch
- The best sink hole dia for the faucet is 1.3inch-1.77inch
- The max counter thinkness is 2.28 inch ,if you need longer one (4inch ) , please check this asin :B08915MM4X
How to Install
- 1.Install faucet on the basin
- 2.Fix control box on the wall
- 3.Connect mixer valve outlet to control box inlet
- 4.Connect faucet and control box outlet with flexible pipe
- 5.Sensor signal wire connection
- 6.Cold water pipe connect to mixer valve inlet(mark blue)
- 7.Hot water pipe connect to mixer valve inlet(mark red)
Control box
- Connect the water mixing valve to the inlet of the control box.
- Adjust the valve so as to control the water temperature.
- Power Supply:DC 6V,4AA alkaline Battery(not included),can last for 2 years for family use
Water mixing valve
- Water mixing valve is made of solid brass.There's two inlets(one for cold water and another one for hot water), and one outlet(mixing water).
Package
- 1x faucet body with mounting stem and nut
- 1x deck plate
- 1x control box
- 1x water mixer valve,brass with check valve
- 2x 1/2-9/16 water supply pipe, with red and blue mark(red one for cold water, blue one for cold water)
- 1x 1/2-1/2 water pipe (for mixing water)
- 1x set fixing screws(for control box)
- 1x instruction paper
Emiliano G.
2025-08-25 11:02:48
Water comes out with higher pressure than expected but it’s a good thing. Has worked seamlessly and looks really nice. Batteries are easy to install and packing says they last up to 7000 washes off the top of my head.
Leca Logan
2025-08-14 11:09:47
Had to turn water down. Comes out fast and splashes if you don't
Maxwell Michaud
2025-08-13 10:31:32
Faucet looks nice, but doesn't shut off. The sensor lights up as it reads my motion, but the water never shuts off. Seems like the solenoid is defective. Searching on the seller's page for an email or some way to contact them, can't find it. It would be nice if we had a way to contact them or if they could check if their product works before shipping it out.
S. Steele
2025-08-06 11:18:43
Appearance 5 stars ease of installation 4 stars performance 5 stars I like the fact it’s water saving and stops the kids from continuously running the water.
DealMaker
2025-07-21 10:27:50
The media could not be loaded.
ALBERTO ALVARADO
2025-05-31 15:45:29
Easy to install. Sensor works with hand motion. But adjusting the cold and hot water wasn’t that simple. Keep that in mind. Overall good product if your using just cold water as a single line.
Jose Phun
2025-05-12 12:50:13
Es lo que mi esposa buscaba
Obo Man
2025-02-22 17:10:45
INSTALLATIONI am not sure if it is just my sink but the mounting stem is too big to fit through the center hole of my sink. I have to spend time to cut down the diameter of the stem. The result is that the faucet is just ok attached to the stem.OPERATIONAlso the solenoid valve (which is plastic) leaks. I have to put plumbing sealants in it.Since the faucet is slightly aiming outward, you may need to reduce the water flow if you have a shallow sink to avoid water spilling out when turned on. Also you need to adjust the water flow for when your toilet is refilling if you use this in the bathroom. The water pressure could be too low if you just adjust it when the toilet is not using water.
greg
2025-02-01 10:45:29
Poor design. Will not stay in a porcelain sink overflow hole. The plastic ring would fall off and stay in the hole. Had to silicone the ring to the metal cover, let it dry and stick it in and it works well now.
Recommended Products
$109.99
$ 49 .99 $49.99