Shopping Cart

Your cart is empty.

Your cart is empty.

GLOBACT Adjustable Turnbuckles/Camber Link with Rod Ends Sets/Wrench for RC 1/10 Slash 4X4/2WD Replace Parts 7-Pack

Free shipping on orders over $29.99

$18.99

$ 8 .99 $8.99

In Stock
  • 🏆【Compatible with】Suit for 1/10 Slash 4X4 / 2WD short course racing truck RC Car.
  • 🏆【Replace stock model】Easy upgrade replace stock Model #1935 3139A 3139X 3644 3745, (Pay attention to check whether the Camber Link set model of the vehicle manual Is it consistent, To avoid the returns products and save your time due to the inconsistent model).
  • 🏆【High quality】The combination of plastic Linkage and Turnbuckle can better solve the loosening problem of Linkage and make your car stronger and not shaken.
  • 🏆【Adjustable Length】Linkage length can be adjusted as needed.
  • 🏆【What You Get】 4 × Long suspension Link, 2 × Short suspension Link, 1 × Servo links, 14 x Screws, 8 x Nuts, 1 × wrench.



Product Description

for traxxas 2wd parts

Kaden b.
2025-08-01 09:25:11
I’ll update after a few crashes if they don’t hold up well. They seem sturdy. Thicker than stock.
C. Thompson
2025-07-25 11:50:29
After my son rammed my Slash 4x4 and left my rear wheel hanging was time to get parts. These are much stronger than the original parts. Like these alot!
Chris
2025-06-25 15:56:44
Installed on a Slash 4x45 out of 7 links fit without issue. I had to replace the rod-ends of the steering links (the set that connect from the bellcrank to the steering block) with the longer ends from my stock set to absorb more threading on the rod. They were a couple mm too short and would pop out on the wheel side after a minute or less of driving. They should make 1 pair a little longer to accommodate the steering links. Strong so far, haven't broken any of the rods yet.Not a bad budget set if you don't want to spend the $100+ for the Traxxas upgraded links.
Troy
2025-06-21 10:31:03
worked great on my old traxxas rustler. now the wheels are aligned right. great up-grade.
mike
2025-05-09 15:03:46
They seem decent but they are too short to actually run on my slash.. they'll go in the bin of misfit parts with the rest of them until I find a project to use them on
German
2025-03-31 10:32:55
Slash 4x4Works for camber links front and rearDoes not work for Toe links (too short)Does not work for Servo link( too long)(Check pictures)The "Long Links" do not work as Toe links in the Traxxas slash 4x4, they are too short. At first glance it appears that they can be adjusted to the correct length, but if you pay close attention, only 2 threads hold the entire link together on both sides. Well beyond the limit for them to be any useful. The threads will strip out, the plastic ties will crack.(Check pictures)I think the problem lies on the plastic portion of the link. The threads on the plastic ties are recessed about 1/4". The threads don't actually start until the Hex mold starts. That 1/4" section must be converted to threads so there's more of a contact patch when extended.Servo Link was too long even after shortening. 1 star because I was only able to use 1/3 of the product.
Eli
2025-01-02 11:37:42
there good
Delzie Osborne
2024-12-29 13:40:12
Strong and durable