Shopping Cart

Your cart is empty.

Your cart is empty.

GME Professional in Circuit ESR Capacitor Tester, Capacitance ESR Meter, Fully Assembled ESR Tester - Designed and Engineered in The USA, Fully Assembled ESR Tester

4.9 (12) Write Review
Free shipping on orders over $29.99

$129.88

$ 57 .99 $57.99

In Stock

About this item

  • 【DESIGNED AND ENGINEERED IN THE USA】 GME Professional in Circuit ESR capacitor tester designed and supported in the USA; compare to most other ESR meters on the market that are generic private label import with unknown manufacturer and no support or warranty
  • 【ACCURATE MICROPROCESSOR CONTROLLED】 Microprocessor generated 100 kHz output test frequency and low 15 mVp-p output test voltage that will not turn on any solid state devices during testing, critical for accurate test result in circuitry with active components
  • 【INTELLIGENT DESIGN】 ESR capacitor tester automatically discharges capacitor under test; Audible buzzer announces ESR range during testing allows quick checking of entire PCB in seconds; Intelligent automatic calibration on power up, no manual zero needed unlike many other ESR meters
  • 【WIDE RANGE IN-CIRCUIT ESR & DCR TESTING】 Tester meter measures ESR (equivalent Series Resistance) on capacitors range from 0.47µF to 2200µF, in or out of circuit
  • 【EASY TO USE, PORTABLE, AND RUGGED DESIGN】 Easy One-Handed Tweezers with gold plated tips and extra-long cable; Non polarity dependent test probe, eliminates the need for polarity checking


Product Description

GME Model 236 Professional ESR Capacitor Tester, Accurate, Reliable, Designed and Supported in USA

GME Professional In-Circuit ESR Capacitor Tester, Designed and Engineered in the USA

Model 236 In-circuit ESR & DCR capacitor tester is designed to measure ESR (equivalent Series Resistance) on capacitors range from 0.47µF to 2200µF, in or out of circuit. The ability to troubleshoot in-circuit saves time and effort, making the 236 a must for anyone that tests or troubleshoots PCB (printed circuit boards).

Wide Range In-Circuit Testing, Automatic Calibration, Audible Buzzer, Portable and Rugged Design
Engineered & Supported in the USA, Automatic Calibration, Gold Plated Non Polarity Test Probe
GME Model 236 Professional ESR Capacitor Tester, Designed and Engineered in the USA
Wide Range of Applications, PCB Troubleshooting, Evaluate Capacitors, Appliance Testing & Repair

Features:

  • 100KHz output test frequency, 15 mVp-p output test voltage that will not turn on any solid state devices during testing, critical for accurate test result in circuitry with active components
  • Audible buzzer announces ESR range during testing allows quick checking of entire PCB in seconds
  • ESR tester automatically discharges capacitor under test
  • Intelligent automatic calibration on power up, no manual zero needed unlike many other ESR meters
  • Measures electrolytic capacitor in or out of circuit
  • Easy to use one-handed tweezer with gold plated tips and extra long cable
  • Non polarity dependent test probe, eliminates the need for polarity checking during test

Specifications:

  • 100 kHz output test frequency
  • 15 mVp-p output test voltage
  • ESR Measurement: 0.1 – 30 ohm
  • DCR Measurement: 0.5 – 30 ohm
  • One-handed tweezer test probe with gold plated tips
  • Standard 9V Battery or external AC adapter

Package Contents:

  • One (1) – GME Model 236 In-Circuit ESR & DCR Capacitor Tester
  • One (1) - Protective Rubber Holster
  • One (1) - User Manual

S. Booher
2025-08-25 15:20:37
I loved the in-circuit testing capability. I was able to troubleshoot and verify an under-performing cap. Loved it.
Marteen
2025-07-24 17:20:37
Works as intended
Stephen
2025-07-10 15:23:05
The tweezers broke right away, But the tester function works well. Kind of expensive. Much better if had banana plugs!!!!!
Dynamix II
2025-06-20 14:36:12
This capacitor tester is excellent, i’ve been using it for about a year and it’s the best one i’ve used. it’s simple to use and it’s perfect to tell when the capacitor’s esr reading is out of range.
Abdll
2025-05-08 17:34:32
The right product for me
Rex
2025-04-03 12:39:02
This meter is FAST! Almost fully automatic, it zeros and calibrates itself in half a second when you power it up. Then its up to you to start grabbing capacitors as fast as you want with the tweezers. Works great on SMD components too. It gives audible beeps based on the reading and once get familiar with capacitys and the meters scale, I won't even have to look at the meter before moving on to the next cap. As a business, doing electronics repair and custom design, this SAVES TIME AND MAKES ME MONEY! WILL PAY FOR ITSELF!
N Trueman
2025-03-28 10:51:27
The tweezers are hard wired into the unit and so you cannot use flying test leads e.g. froma multimeter with this unit. You are therefore unable to reach both terminals of any reasonably large capacitor or ones with axial leads. Why no banana plugs for the test leads to provide more flexibility.Also no screen so you have to interpret a bunch of beeps which looks like a real headache to me but I never even got that far with it. The unit is being returned.
Theo
2025-02-19 12:57:39
Looks good.
John k
2025-02-09 14:40:17
Works great. In circuit testing. A must for repairing equipment
Joe
2025-01-11 10:19:54
Me ha servido mucho para la compostura de aparatos eléctricos. Lo recomiendo al 100 👍👍👍
Craig c
2025-01-03 12:28:34
Item as described! Great product!
Customer
2024-12-03 18:34:21
Seems to work great, Haven't found anything I don't like, but would be perfect if it had interchangeable test leads for different applications and ease of use .