Your cart is empty.
Your cart is empty.Product Description
Questions & Answer
- The flash trigger set is designed for photographic studio and on-location work to trigger various flashlights.
- The transmitter is attached to the hot shoe of the camera while the receiver is plugged into the studio flash. Each receiver works with one studio flash. It can Speedy frequency regulation and is convenient for photographers to shoot.
1. Q: The transmitter can't send a signal ?
- A: Please check whether the transmitter is taken away the transparent film.When they are set up in the same channel,you can press the test button to test the signal,the light on the transmitter and receiver will become red.
2. Q: The receiver can't receive the signal or have no response?
- A: Please check whether the receiver switch on the side is on and installed the 2*1.5V AAA batteries,the most important is set up in the same channel as the transmitter.
3. Q: The flash trigger cannot trigger the flash light?
- A: Please check the flash light whether is set up in the same channel as the trigger,the sync cord or the hot shoe mount is completely connected.
4. Q: Does other brands of flashes can be suitable for this CT-16 flash trigger kit ?
- Yes,this trigger kit comes with the standard 3.5mm sync cable and 6.35mm covert adapter,it makes sure that you can use them to widely compatible with other brands of strobe flash.
5.Q:Does this flash trigger is compatible with Canon,Sony,Nikon Camera?
- There are too many major brands of cameras, but the camera model of the standard hot shoes is generally matched, please check the hot shoes head pictures to determine whether it matches your cameras.(Please understand that some models may not be compatible)
OPERATION CAUTIONS
Please be set up on the same channels
- The transmitter and receiver need to be set up on the same channel.Then,can test the signal between the transmitter and receiver.
- 16 groups of channels designed to easily avoid interference between multiple transmitters.
Please take out the transparent film
- Before use the transmitter,please take out the transparent film on the transmitter.
Need to install the batteries
- The receiver need to be installed 2*1.5V AAA batteries.
Specification:
- Channel: 16 Groups
- Sync cable jack: Support 6.35/3.5 mm ports
- Outdoor working distance: ≤30 meters (open area)
- Indoor working distance: ≤20 meters (open area)
- Transmitter frequency: 433MHZ Wireless transmission
- Synchronized time: 1/250s
- Transmitter power: 12V 23A battery
- Receiver power: 1.5V (AAA*2 battery )
Not Compatiblity:
- Not compatible with Nikon SB800
Godox Flash Trigger Package Contains
- 1*CT-16 transmitter
- 2*CT-16 receiver
- 2*Sync cable
- 2*Convert adapter
- 1*Clean cloth
Scott85
2025-09-03 11:18:06
These were super easy to set up, plug & play. These were used on a Nikon D750 & some older Photogenic Strobes. Worked perfectly, no issues.
Guelo
2025-08-29 21:39:18
Great item. Does what it's supposed to do. Reasonably priced.
Bjudo
2025-08-20 13:22:37
I purchased this trigger for my speed lights after an older unit finally died and could not be resuscitated. I used them on my Canon Camera and they worked reasonable well at 10-12 feet. Always make sure that you use fresh batteries in speed lights to reduce recycle time. The triggers themselves are plastic similar in quality to units I have purchased in the past. Definitely pricy for what you get but Godox is a reliable brand name.
Michael Martinez
2025-07-30 18:39:01
Rebel T7 item work . Good starter trigger.
Galactica Citizen
2025-07-25 18:47:10
I bough these to upgrade from an older cheaper brand. The build quality its good for the price and didn’t encounter any issues with connectivity for the past 6 months I was using it.
reyesgohard
2025-07-17 15:24:51
On the first set, only the transmitter seemed to function, meaning it would blink red when I hit the test button. Neither receiver worked, even with fresh batteries, no signal, no light, nothing.I just received the replacement kit. On this one, the transmitter and one of the receivers worked. However, the receiver would only fire off the flash randomly, meaning I would have to take maybe 2-7 shots before it would actually fire off the flash on my strobe. Unacceptable especially if you're on a paid shoot. The second receiver was another dud, did not even receive a signal. Back to Amazon both these sets go!Pony up for something more expensive that actually works and avoid this junk!
Customer
2025-07-16 13:53:05
Works perfect for what I need. I have a Sony a7iv and some studio strobes that wanted to wirelessly trigger. This was a great, much cheaper option so I’m very happy with my purchase! I was even able to use the trigger on an old film Canon AE-1 and get it to trigger!
Kiki
2025-06-01 19:11:01
These are great if you’re just starting out with off-camera flash photography, they’re very light and easy to set up. Just match the channels on the transmitter/receiver, put batteries in the transmitter and click! ðŸ˜
Jean-Denis Piché
2025-04-28 10:24:28
Très bon choix
Michael Mancillas González
2025-04-06 15:51:22
Recién hice las primeras pruebas, todo ha funcionado bien.
Aidan
2025-04-04 15:25:08
Dad and I were growing apart until this came to our door, now we have turned our dining room into a Photography studio and every time I have my friends over, my Dad takes pictures of us.
Kari
2025-02-28 15:54:36
So far this trigger seems to be working well. I like how compact it is so it doesn't get in the way. Unfortunately it only seems to work up to 1/200fps and not the 250ps that the add advertises. But for the price I'm still happy with this little system.
Sergio Navarro
2025-02-14 13:29:22
Muy bien producto, sencillo de utilizar. Hasta ahorita no me ha fallado.
Recommended Products