Your cart is empty.
Your cart is empty.Product Description
- Used for r12, r134a, r404 and r22 a/c systems
- Designed for use with FJC flush solvent
- Includes: Empty canister, 2.95ft hose (FJC flush solvent are not included)
Is whether your air condition dirty and hard to clean thoroughly? Our Air Conditioner System Flush Canister Gun Kit will be absolutely a great helper for you! This flush canister gun kit is excellent for quickly and effectively removing refrigerant oil and debris during retrofitting or compressor replacement.
- Designed to work with any light weight A/C flushing agent which can be mixed with pressurized air.
- Made of high quality aluminum, it is durable enough for lifelong use.
- This flush kit can be used to remove contaminants, moisture, and acid from r12, r134a, and r22 a/c systems.
Quality Aluminum Canister
Compared with stainless steel canister, the aluminum canister is one-piece molding without leaks, the canister is high pressure and corrosion resistant for a longer service life. 1L capacity canister is large enough for many flush procedures.
Safety Pressure Relief Valve
Designed with the pressure relief valve. Once the pressure over 170PSI, it will be released automatically. Say goodbye to the explosion accidents to ensure your safety.
Fully Equipped Flush Kit
This complete flush kit comes with the improved spray head for a steady spray. It is easy to use, just fill the canister with flush solvent, pressurize with shop air and flush each component.
snrusnak
2025-09-03 15:57:12
I just replaced pretty much my entire AC system in my 2007 ram 2500 5.9L cummins. I've never done AC work like this in a car. I replaced the compressor, orifice tube, drier/accumulator, and condenser. I used this kit to flush the evaporator and the 2 hard lines being reused. It is a nice kit for the money, no complaints really. Easy to use, etc. I used Supercool Flash Flush (solvent based, not oil based - leaves no residue). This worked great for me, the only issue was it uses WAY more flush fluid than I anticipated. I bought two 32 oz bottles thinking thatd be plenty, and I used the entire first bottle in about 10 seconds! I ended up screening/filtering and reusing much of it so I could flush each part multiple times. The first flush on my evaporator came out dirty/grey so I discarded it, but everything else came out clear so I filtered reused it. Just something to keep in mind. I think blew compressed air through the parts to dry them out. The flush fluid I used evaporated very quickly (I spilled some on the shop floor) and didn't leave any residue, I highly recommend it also.
PaulTD
2025-08-23 11:01:02
It's pretty straight forward. Install the air fitting that works for your air hose, then assemble the other hose with the attached sprayer and put the hose on the other connector that's on the bottle. Relieve any air pressure in the canister, then unscrew the canister from the top, add some A/C flushing solvent, re-assemble, then turn on the air (red handle) and spray air/solvent through the component you're flushing. Great product, five stars.
Gorignak
2025-08-19 15:22:35
This Flush Tank worked flawlessly. You are not getting a professional grade setup at this price....BUT.....with the addition of one of our hose end types, I was able to flush my 1995 GMC system a half-dozen times with several solvents. Very well designed and adequately constructed for most of our garage projects. NICE addition of the spray gun and tips. This has all you need, right out of the box.
Review person
2025-07-21 15:29:53
The blow nozzle is pretty cheesy. Get the rubber tips that will thread onto a small blowgun.
R. Davis
2025-06-25 15:53:33
This flush kit is nicer than I expected for the cost. Fit and finish is good quality and it's easy to assemble. The tank was clean but I still ran some flush solvent through it before using it on my AC system. This is good practice and particularly important if you're flushing either the evaporator or condenser. The Goplus is easy to use. The main thing is to make certain the tip is properly inserted, and you have a good seal, before you squeeze the trigger. If you do otherwise you'll "flush" a lot more than you intended. I used it with highly volatile solvent and had no problem with it degrading the rubber tip. I also was impressed that a spare rubber tip and O-ring were included. There was also a quick-fit air adapter included. Unfortunately, the adapter included isn't the one most DIYers will need. If you have a compressor you likely have one laying around anyway. So.......bottom line; good product at a good price.
Luke S
2025-06-10 18:26:04
This tool does what it says. It's based on the simple principle of pressurizing your flush solvent of choice in a metal can and then using a compressed air supply to shoot that solvent through your flushable components using the supplied nozzle. The nozzle resembles a typical compressed air blowgun but with a conical rubber end that will allow you to push it against just about any pipe up to about 1-1/4 inch in diameter and get a good seal. The fittings for the canister shut-off valve are standard 1/4"NPT. Be sure to tighten all the connections securely to prevent leaking fluid when pressurized. The unit has a handy hanging hook and enough yellow hose to get around your engine compartment if needed. All in all a good buy and worth the money to help get those AC pipes and components flushed. Be aware that compressors, expansion valves and some condensers should not be flushed. I was able to flush my evaporator while still installed but used rubber hoses on the inlet/outlet pipes to extend the connections to the flush nozzle.
Daniel R
2025-05-22 18:36:18
Only complaint is the air shut off valve is cheap and has too much play. Works as advertised.
Ed
2025-05-06 13:46:50
Does the job and seems to be of good quality and value for occasional home use - not sure how well it would hold up in commercial application.
momousse
2025-04-08 18:32:39
materiel de qualitékit completMERCI
Bernard Dandurand
2025-03-12 16:33:07
Fonctionne très bien pour le prix. Utilisé pour nettoyer conduites de climatiseur de voitures nouvelle installation. NOTE: Porter des lunettes de protection!!!
zhang
2025-02-10 13:37:58
Very good
kenpearson
2025-01-05 15:41:44
Flush Ac system
Recommended Products