Your cart is empty.
Your cart is empty.Product Description
High Quality Material
- Inner core: Premium pure copper
- Outer covering: High quality PVC
- Test leads are soft and flexible, which will not be deformed after repeated use.
4mm Banana Plug
- 4mm safety insulated banana plugs fit most digital multimeters.
Safety and Non-slip
- The insulation sheath can protect your safety during testing. And the surface of the alligator clip is non-slip design.
- The max open diameter of the alligator clip is 10 mm, which can basically meet your testing needs.
Wide Use
- Suitable for all electrical testing, electronic applications and moderate to low current testing on your vintage cars, trucks and motorcycle.
Crisee
2025-09-04 19:15:47
Seem very durable fit perfectly. Sharp teeth won't loose easily. DIY around the house.
Rex
2025-09-01 12:47:58
Seems to be a good product. And fast delivery!
Backyard Enginerding
2025-08-22 18:34:13
Have only one complaint but it's a big one. The insulation on the plug ends appears to have been chewed by an angry rodent before being overmolded. This damage right at the strain relief means these are not going to last as long as they were intended to.Peeled back the shield on the clip end to add solder to the connection as some companies simply crimp clips on with no solder. Was pleasantly surprised to see the soldering had been done at the factory.Plugs fit snug in all owned meters and power supplies. Wire is soft and flexible with little memory. Springs in clips are strong. almost too much,
Robert F. Walters
2025-08-16 11:41:29
good value
Sunglass Evaluator
2025-06-13 11:35:58
Works great with the Kaiweets HT118E meter, significantly better than the probes than came with the Kaiweets HT118E.With the HT118E set to Ohms and it's stock probes shorted together it reads anywhere from 0.10 to 0.12 Ohms; after waiting to settle; it's best to short the leads before turning on the meter, so it settles faster.With the Goupchn Clip Leads, the same measurement on the HT118E meter reads from 0.010 to 0.012, so 10-times less error!Note than I had the two test leads twisted together along as much of the length as practical in both cases to minimize electromagnetic interference.I'm disappointed that digital meters with sensitivity down to millivolts, and even lower, don't offer test leads that are ground-shrouded along most of the length so as not to pick up so much electromagnetic noise.Using the HT118E with the Goupchn Test Leads with Clips, I am getting significantly better readings than with any other meter I have even used, and some of the other meters were more expensive.
Doug T.
2025-04-28 19:58:56
A must have for diagnostic work in tight area
GHall
2025-04-06 15:16:15
The fit both of my meters and work great. Alligator clips are stiff!
L C
2025-04-01 10:08:00
The minute the little copper end hook gets bent you might as well throw em out. Yes they are small and meant for delicate tasks but occasionally the little hook catches on something which is the only thing keeping the push button from coming out of the socket by the internal spring.I wasn’t expecting much and while they worked decent for the first bit I think looking for a more robust better designed version is a much better idea. You’re more likely to contribute to unwanted land waste and encourage Chinese manufacturers to cut out any design features that will make a more robust product because consumerism saying will only buy if it’s cheap.
backwoodsguy
2025-03-26 11:43:18
All the connectors worked fine on my meters.The alligator and probe style leads work well and had I no problems with them.The clip leads are a little fragile and bend fairly easily so be careful with them. I bent one first use but it bent back with no residual loss of function.I would not recommend for commercial or industrial lab use but they are fine for my occasional use.
Bigluis
2025-03-06 15:49:54
Bonne qualité très flexible
Mauricio
2025-02-15 13:38:00
Los plástico de los cables y conectores son gruesos y flexibles. Las pinzas se ven robustas y de buena calidad. Los he usado con un amperÃmetro Milwaukee 2237-20 para medir capacitancia y resistencia en motocompresores y hasta ahora parecen dar lecturas precisas. El tiempo dirá si soportan el uso diario.
Terry Dillon
2025-02-07 13:00:07
Compete set of multimeter clips for every electronic need. And extra sets. I won't need them all, but it's cool to have extras just in case.
AB
2025-01-26 18:46:41
These were bought and coiled up on a hook in my workshop for a later project. Today I uncoil them and hook them up to my multimeter. I used them briefly and then this happened… they weren’t pulled on or bent or used to support any weight.
Recommended Products