Your cart is empty.
Your cart is empty.Removing the governor on your stock engine can be done safely and easily with the matched components in this kit! We have included a billet flywheel, billet connecting rod, valve springs, and all the gaskets needed to remove the governor on your Predator 212cc Non-Hemi (69730, 69727) engine.This is the perfect addition to get more RPM's from your stock engine, and do it safely!Contents(1) ARC_6625 ARC billet flywheel(1) ARC_6254 ARC billet rod(2) ARC_DJ-2056 18# valve springs(1) ARC_DJ-1305P Complete Gasket set
Gary Wilson
2025-07-25 17:13:42
Everything bolted up perfectly
That One Guy
2025-07-24 18:54:40
Very happy with this flywheel and rod!! First off once you open it you’ll be blown away by the precision and finish due to its mesmerizing shine but after you bury it under some less desirable appearing cast aluminum you’ll be comforted to know you won’t shoot a rod or shrapnel from a flywheel into your back and or leg after at least doubling the stock RPM range. Add a performance camshaft while you got her cracked open for alittle more power depending on what your end goal may be. I did this among a few other performance parts parts and got my 212 predator to 8500 RPM which is some huge gains considering stock (3500-3600 RPM) I hit 42MPH with a 10t front sprocket 37t rear sprocket. Highly recommend as long as your capable of doing this kind of mechanical work and have the tools to do so, not something you want to cut corners on.
Michael
2025-07-19 21:04:41
Everything installed perfectly
Kenneth green
2025-06-04 20:37:40
Okay people. This kits is bad ass. Highly recommend. Only thing I wish the told you the torque specs on the parts. But if you are building the 212 get it so work it.Rod cap bolt 130 then 150 then final 170inlbs or 14.1 foot poundsFlywheel is 65 foot poundsHead bolt 14 foot pounds. You don't have to remove head to install rod. If you push the piston down until you get the snap ring out. The cyl will keep the rings compressed as long as you don't push it to far down the on the cylinder
Misty
2025-02-16 17:29:28
Used on my racing kart
michael norris
2025-01-09 18:41:09
It's wonderful light weight and bolt and go. Always check your squish clearance and lap the flywheel
francisco rios
2024-12-05 18:39:52
Easy to install but haven’t put it to the test.
Hunter
2024-12-01 14:52:11
These are very nice parts
Recommended Products
$67.00
$ 25 .99 $25.99
$28.98
$ 12 .99 $12.99
$25.99
$ 12 .99 $12.99