Your cart is empty.
Your cart is empty.Product Description
Find it Fast. Get it Fast.
- Diameter: 3/4" -10 and 1" -8
- Length: 12", 18", 24", and 36"
- Grade B7 Steel
- Plain Finish
- Fully Threaded
- Coarse Threads (Standard)
Fasteners Plus Grade B7 Steel Plain Finish Fully Threaded Rod
B7 All-thread is most commonly used to bolt pipe flanges together as it can handle both high temperature and high pressure applications. All of our threaded rod sections feature cut threads which means they start off as the full size round stock and threads are cut into the material. The plain finish is designed for indoor use only where there aren't any chemicals or solvents present.
Meet the Fasteners Plus Team
Teamwork is a way of life at Fasteners Plus. Working together ensures we’re offering the very best to our customers, every day. Whether it’s our quality products, value prices, or superior service, our top priority is to provide the very best shopping experience. Meet the people who are making that happen.
Dennis
2025-09-04 12:48:40
Good quality. Needed a thorough cleaning and shipping was a bit slow but these are good studs.
Greener
2025-08-21 12:13:26
I used this piece of threaded rod to make two jack screws. I welded a nut to one end and then used a coupler as the adjustable shuttle. Works great!
Al Dyson
2025-07-20 17:52:50
Works as it should
Customer
2025-05-04 15:51:46
The quality of the 7/8-9 Threaded Rod was excellent-Worked great when rod was stubbed onto manufactured shaft to make a replacement crank shaft to move bandsaw wheel up and down-THANKS!!!
Brandon M.
2025-04-24 18:01:45
Not much to review about it, normal threaded rod
Rollin Blanshine
2025-03-26 12:36:49
THANKS!
MommaNanc
2025-02-09 15:15:06
The product received was as expected, when expected. I will use this company again when the needs arise again.
Doug
2025-02-04 10:30:09
"12 inch" threaded rod was actually 11 7/8" long, so beware if you need it a true 12". I was using it to replace a 12" bolt in a Chinese made bearing install kit, so that 1/8" wasn't critical to me. The rod was cut well (no metal ridges) and the cut was square, but ends still had a lot of metal splinters. Obviously, the splinters will be removed when you bevel the ends to make nuts easier to spin on, just be aware when handling it (especially when removing it from the thin plastic bag in which it's shipped). The threads are machined well and with the B7 hardness rating should be fine for my application.
Recommended Products