Your cart is empty.
Your cart is empty.
2 Tubes (3 oz / each) Super Lube Grease
Super Lube Grease is a patented synthetic, multi-purpose lubricant with Syncolon (PTFE).
Due to its dielectric properties, it is suitable for use as connector / bulb grease.
Synthetic base fluids and the addition of PTFE micro powders combine to form a premium lubricant that provides protection against friction, wear, rust and corrosion over a temperature range of -45°F to +450F.
Super Lube Grease is a USDA/NSF listed Food Grade lubricant NLGI-2, rated H-1 for incidental food contact, and will not run, drip, melt or separate.
This product is available in a variety of packages / sizes
- 10 x Super Lube 82340 (1 ml squeeze-packs)
- 100 x Super Lube 82340 (1 ml squeeze-packs)
- 500 x Super Lube 82340 (1 ml squeeze-packs)
- Super Lube 21030 (3 oz tube)
- 2 x Super Lube 21030 (3 oz tubes)
- 3 x Super Lube 21030 (3 oz tubes) PLUS 1 BONUS APPLICATOR TIP
- 12 x Super Lube 21030 (3 oz tubes)
- Super Lube 21036 (3 oz cartridge)
- Super Lube 41150 (400g cartridge)
- Super Lube 41160 (400g can)
Wanderer
2025-08-18 13:52:06
This stuff came highly recommended to me some years ago, and after trying it out, I have never regretting having it on hand in the garage. It is outstanding, long lasting, temperature stable and performs superbly well for everything I've used it on.If you have older machinery, say for example drill presses or band saws this stuff works fantastic for keeping the friction and wear surfaces lubricated. Drill press quills, pinion gears and spindle splines will all last a lot longer and operate much better if they're kept properly lubricated. What better to use than something like product, which goes on clear, forms a thin and stable coating and doesn't readily evaporate or run off?It's also fantastic as a rust inhibitor. Put a thin layer on your drill press table, band saw table, rotary table or machinist vise and you will handily keep the flash rust at bay. This is even more important on things you've just cleaned up/restored if you've taken old material off and don't want all that effort to be spoiled in short order.Last but not least, if you've got any ratchets in your tool box that need servicing or rebuild, this stuff is what several manufacturers use at the factory and what they ship in the small squeeze packets that come with their ratchet rebuild kits. The trick is to only apply a thin coating and not gob it all over the mechanism, otherwise you'll inhibit movement or cause things to stick when they should be free floating (i.e. the pawl mechanism). This is especially true for fine tooth ratchets, so follow the "less is more" approach and you will be rewarded with a ratchet that is butter smooth and works better than new (and sounds like it too).In summary, truly an excellent product to have around the home shop, garage or wherever you find yourself needing a synthetic grease. The more you end up using it, the more you will appreciate just how well it works. Definitely one of those items that you will dread running out of and, if you're anything like me, stocking up on spares ahead of time. It's that good.
Harleyman
2025-07-14 11:21:30
This is a really Fantastic Lube. Also at a great deal.
Zak Alamleh
2025-07-06 21:33:47
Used this product to lubricate the Z-screw on my Ender 3 pro. It worked really well, just had to wipe off the excess after moving it up and down a few times. Also works for lubricating any moving parts on 3D prints. I used this to lubricate PLA prints with great success.Definitely recommend!
jeremy l.
2025-03-25 18:27:55
I repair car and home amplifiers. I’ve used other brands from Amazon. Artic silver and Gennel. Artic silver dries up quickly. Gennel works well in low power amps but dries up as well.I used this stuff in a 1000w rms class AB and it stays liquid like it supposed to. The other brands would have been dry by now and lost the ability to transfer heat causing an early demise to transistors. I also use Dow Corning 4 compound. Which is VERY pricey but works great. This is on par with the Dow 4 compound and way, way cheaper.This is now my go to thermal grease.
Deborah
2025-03-04 11:42:09
I started using this when I got into RC helicopters.turns out it's great for lubing all light duty products. It's clean and easy to use.lasts forever (if you don't put the tube somewhere where you're sure to remember . . . but don't)â–² this is why I bought the 2 pack--one to lose and one to keep
Moses
2025-02-28 21:35:02
Didnt smooth the motion on my linear rail
Fernando Ortiz Medina
2025-02-12 14:27:12
Lo utilice en un actuado de la lavadora y cerradura de la Tacoma.
Joy H.
2025-01-26 17:38:59
Product arrived as scheduled, well packaged, item as described.
Adriaan
2025-01-09 14:28:44
2 tubos y en descuento, excelente! Es de los mejores lubricantes que hay en el mercado, se puede utilizar en metales de todo tipo, plástico, etc. Lo he usado en bisagras, puerta del garage, puertas, motores DC, rodamientos, entre otros.Aguas, no todos los empaques de goma son compatibles con este lubricante, vean la página oficial y chequen la compatibilidad del producto.
Recommended Products
