Your cart is empty.
Your cart is empty.GreenWorks offer a range of systems to choose from in corded and cordless tools. Leading in innovation, the corded Lawn system offers a variety of tools to get all your yard work done quickly and efficiently. Whether you need something economical or with greater performance, the GreenWorks Corded Lawn Tools provide reliable options without the hassle of gas or the high cost of operation throughout the years. Get started within seconds and leave the gas hassle behind. Choose from trimmers, chainsaws, mowers, snow throwers, dethatchers, pressure washers.
RTE
2025-08-06 09:47:34
It replaces my years old original nozzle that wasn’t “turboing†any more. It works great. I really glad that it is still available.
MARK
2025-07-27 13:21:31
This nozzle is the one that is most effective out of all the ones I use on my pressure washer !They do wear out so it’s nice you can get replacements !
donald orcutt
2025-06-04 13:37:06
Original turbo nozzle cracked, ordered replacement and it rotated the water stream intermittently. It would rotate the stream as designed, then stop in one direction anthem another. Checked to see if there was any obstruction and put a needle in end to see if it rotated. Unit worked well but my patio looks like kids chalked circles on it.
WRY
2025-05-01 10:38:27
This thing cleans very well and quickly - seems to be about a 15 degree nozzle but the internal rotation provides the cleaning power of a 15 but covers a much wider area. The problem, as many have noted, it that after a relatively short use the internal nozzle quits rotating and provides only a tightly focused stream. I first assumed there was debris clogging the device. Easy to disassemble. Remove the silver metal fitting using a 6mm hex wrench (opposite hand threading). Inside there is a white plastic filter and gasket and the rotating nozzle. Pull out the filter assembly with needle nose pliers to access the rotating nozzle. I found no debris and after reassembly the problem persisted. I disassembled again and covered the internal parts with with spray lubricant. This solution worked for about 20 minutes then same problem. I then lubed it with several drops of 30 weight motor oil. That kept the device working properly for about an hour. On subsequent lubes I just added the oil directly on the filter without removing and it worked just as well. In my opinion, the device works so well it is worth the trouble to lube it occasionally. My real complaint is that the manufacturer provided no guidance about disassembly or need for occasional lube. They should be up front about this issue, and maybe even provide oil and a 6mm wrench, rather than ignore the issue and deal with returns and unhappy customers. One final note; if you are using this on anything that would come in contact with food, use vegetable oil.
Mary Ann
2025-04-30 16:49:18
We purchased a Greenworks that came with a high pressure nozzle not adequately rated for the machine causing it to stall. I spent 4 hours using the original nozzle knowing something was wrong. After receiving the new higher pressure nozzle I did the rest of the job in less than an hour. Total surface was a 3 car garage apron, 45 feet of sidewalk, and a double wide 30 foot porch. They were returned to a new like condition at completion. Literally this nozzle can cut through asphalt. I’m absolutely recommending if you purchase a Greenworks check the nozzle pressure info. If it is less than the machine rating you will need to upgrade.
TJF
2025-04-17 10:55:17
This turbo nozzle works great on my electric pressure washer. It is a Ryobi 2700psi with 1.1 gpm flow rate. I had ordered a different one for an electric, but it required too much flow to make it rotate.
BigGuyPNW
2025-04-16 13:22:26
I bought a greenworks electric pressure washer 18 months ago. Used it all summer and the turbo nozzle was amazing at cleaning the sidewalks. Last fall I put the nozzle away wet and it did not work when I pulled it out this spring. I put some metal lube in it and it just was messed up. So I jumped on Amazon and found a replacement. I got it next day and tried it. It didn’t work at all. A really cheap replacement. So I spent the extra few bucks and got the greenworks brand replacement. It works perfectly. If you have a greenworks pressure washer buy this replacement it works. If you buy a different brand it may or may not work and don’t forget to dry your nozzle out after use.
Something2Say
2025-04-03 14:33:13
I purchased the Greenworks 2000 PSI Turbo Nozzle last September 2018 and used it shortly after receiving it. The nozzle worked great the day that I used it (only used it one day). Yesterday (April 2019), I decided to do some pressure washing around my place and attached the nozzle to my Greenworks pressure washer and the mechanism would not spin. So, basically, I now have another 0 degree attachment.I have to say that this is my first “bad†purchase from Greenworks. My Greenworks pressure washer is several years old and has been worked to death and is still going strong. I also have the Greenworks Surface Cleaner attachment which is extremely helpful when cleaning driveways (definitely recommend). Unfortunately, I cannot recommend the Turbo Nozzle. It may work the first day that you use it. However, it may not work (spin) after your first use. Hopefully you will have better luck if you do purchase it.*Update (7/2/19)*I read feedback on other reviews where it was noted that in cases where the rotation no longer works, customers should take the following action:1. Insert cleaner tool or paper clip into end of nozzle to clear any debris.2. Soak nozzle in vinegar/water solution for 30 minutes.So, I tried both options (I didn't have a "cleaner tool" so I used a paper clip). I then used my pressure washer with the nozzle. The nozzle sort of worked at first. Specifically, I had to jiggle it around to get the rotation to work. However, that only lasted about 10 minutes. I was then back to having a zero degree nozzle that would not rotate.As noted, buyer beware. This attachment may work on your first use. However, it may not work on subsequent uses (days).
Philip Quirk
2025-03-13 14:51:28
The nozzle was the only one available for my lower power electric pressure washer.It makes a huge difference - over the selection of fixed nozzles that came with my Costco machine. There seems to be a spinning ball bearing inside the nozzle, which converts the straight water pressure into a scrubbing motion.I cleaned the crappy old decks on my new house. It seemed to easily dig out the old rotten pressure treated wood - leaving only the good stuff!It definitely didn’t make the deck any stronger - but really highlighted the boards that need changing!I sold my previous gas powered pressure washer which was such a pita to start, and bought a much more functional, electric machine.It doesn’t have the power of the gas machine - but this nozzle equalizes the cleaning power!I am very happy with this purchase.
Mr-Fiero
2025-03-03 11:48:07
I have tried several power washers, and some just suck.I have a gas washer, I figure maybe 3000 psi.Other nozzles kinda work, but they never do much. This one, well, if you want, you can wash paint off. when i realized it works good, i used it to strip something of paint, saving so much time.Also, saves time washing mud off a 4x4!I am very happy with this unit, and when it wears out, i am going to re-order.
Steveo
2025-02-19 14:56:05
I have a 2000 psi Sun Joe. Added this beauty to it and it works great. I was able to remove polymeric sand with it no trouble. The default heads couldn’t do it.
sharonpaige
2025-02-15 14:38:36
This is the second time I’ve purchased one of these rotary nozzles because I blasted the cheap ones apart with a high-powered gas pressure washer, but these seem to be a really good heavy duty quality.
Gaston
2025-02-03 15:04:26
Je suis satisfait, Merci
Recommended Products
