Shopping Cart

Your cart is empty.

Your cart is empty.

Guitar PickGuard for Epiphone Hummingbird, 2mm Thickness, Beveled Edge.

4.8 (13) Write Review
Free shipping on orders over $29.99

$29.99

$ 12 .99 $12.99

In Stock

1.Size:Fit Epiphone Hummingbird


  • Fits Epiphone Hummingbird right handed(Not for Gibson), 3M adhesive self stick.
  • 2mm thickness, consists of celluloid and high-quality crystal epoxy resin. beveled edge.
  • Flexible surface and body, compare with the traditional hardness surface pickguard, It very hard to be scratched. This means although used for a long time, it will still be in good condition.
  • The flowers in the pattern are handmade by pure abalone, and different colors will be founded under different light angles, gorgeous.
  • Reject any cheap stickers.


Adaptation guidance:
This pickguard only for Epiphone(Not for Gibson) hummingbird JUMBO SHAPE.
Would not fit for these shapes: Dreadnought, OM, Grand Auditorium.
It's so big that only can be installed on Jumbo guitars.

Product Features:
These flowers are hand made, they're not cheap stickers, they're PURE ABALONE SHELL.
The top-class member inside pickguard land.
As a pickguard, the performance is unprecedented excellent.
As a artwork, The unique pattern of celluloid with crystalline epoxy resin makes it looks like a precious amber.
Even without installed on guitar, still a splendid guy, anywhere.
It is a perfect combination of the pickguard and artwork.
Specially tailor-made for Epiphone Hummingbird.

Package Contents:
PickGuard for Epiphone Hummingbird x 1.


nt
2025-09-05 20:23:32
This fit my Epiphone Hummingbird perfect. I also checked it to the old guard and it is spot on perfect, including soundhole radius and the pointed ends. It's exactly as the supplier stated as being for the Epiphone Hummingbird ONLY! I also own the actual Gibson Hummingbird and as the supplier also states, this is NOT FOR THE GIBSON HUMMINGBIRD. I verified that, so make sure you order the correct one. I really like the 2mm thickness because it is flexible with the 3m transfer adheasive. It is my opinion the flexible guard is better than the standard thin guard because I believe it allows the top of guitar to move a little more freely and doesn't damper the sound like the original guard. Also, being a little more flexible it allows for more expansion and contraction for humidity and temperature changes. The design also has the abolone in the vines as the picture shows. The graphics on the guard are protected by the thick clear epoxy or whatever they used and in no way will ever be scratched off. It's just simply a stunning and well made guard. Oh, and very easy to apply! A very very nice upgrade. And for the price, it is well worth the cost. I also like the beveled edges. They are beveled like the original hummingbird. It definately is a compliment yo the guitar. Please note for the Gibson Hummingbird only, doundhole radius does not fit!
Customer
2025-07-31 16:07:52
I bought this for my dear Yamaha FG700. Love the look of it. It is quite thick tho and I feel that it altered the tone of the guitar. Did not ruin it by any means but it definitely sounds a little beefier than it did before. Not mad about it. Would get it again.
jkssr123
2025-07-27 16:23:53
wish they shipped in a box got damaged in mail shipped back to bad looked great
Michael Hawk
2025-06-30 18:12:35
Fit beautifully on my Gibson G-45, which came with a really cheap looking pickguard. wanted a more hummingbird look for this guitar, so i took a chance on this one, and it's great. very thick, and soft. It does have some weird....scuff looking marks that won't rub out, but it's a pickguard, on a guitar i play a lot, so it's gonna have a bunch more marks on it soon.Take the time to figure out where you want this before you stick it. of course it's not going to line up with the hole exactly, since it was not made for 'your' guitar. measure twice, apply once. i recommend getting it lined up before taking the adhesive off the back, and marking exactly where it will go with a pencil, which you can wipe off later. i did this and it was just the tiniest bit off where the binding around the hole is. like i said, it's not gonna be perfect, just get it as perfect as you can.
Jamie
2025-06-22 14:43:28
Wanted to dress up my Epiphone Hummingbird Pro & I noticed Gibson & Inspired by Gibson Epiphones have thick, beveled, ornate pickguards & the cheaper guitars just have the thin ones with printed on Graphics. Found this pickguard on here for $29. It even has real abalone & mother of Pearl inlays. Got this one in a day with Prime. Used a hairdryer & an icing knife to remove the old one. Had to heat & peel & roll off the residue. That was prolly the hardest & most time consuming part of this process. Made sure to use some Goof Off & a rag to remove the rest of the residue. The new one lined up & it was just a matter of peel, stick & press. The new pickguard fits perfect & looks fantastic! It really raises the bar on this otherwise budget guitar. Ordered a similiar one for my J-200 copy
Big James
2025-05-31 12:34:18
After way too much research and very poor customer service from Gibson and the "authorized" dealer of Guitar Center I reluctantly ordered this pickguard based on good reviews. This is a better guard than the factory one in my opinion. There was a review that claimed it didn't fit right. I have a 2013 Hummingbird pro and it fits perfectly! Make sure old pickguard glue us cleaned off well and be VERY careful when placing the new one. You get one easy chance!
JP M.
2025-05-26 11:42:58
The first one came with some of the inlays sticking out like it didn’t get in mold right and it was way to small for my original Gibson Hummingbird. Returned and got another one. This time it was very beautiful and it still wasn’t the right one for my Hummingbird. To small.
Clinton F. Springer
2025-04-18 17:10:40
This looks great on a jumbo style guitar, I wouldn't recommend it for dreadnoughts, though. The thickness and quality of the pick guard are top-notch. I didn't remove strings before affixing it, it may be easier to center with strings off. All in all a great value for the quality.
Jon
2025-04-17 13:52:59
The media could not be loaded.
カスタマー
2025-02-08 16:38:49
同じアマゾンでハミングバード仕様のこれより少し安いものを買ったのですが、寸法が無茶苦茶で小さく前にずらしても後ろにずらしても全然あわなかっのですが、この商品は大当たりでした。MartinDx1AEにセットしました。満足です。
ピロシキ
2025-01-10 21:03:32
中古店で購入したエピフォンのハミングバードが気に入ってるので何かと手を加えたくなりました。こちらの品を見つけて素敵に思えました。絵が消えかけてるわけでもなくピックガードの絵が大きなウウェイトを占めてるのでそれを変えてしまっていいものかというジレンマもあります届いた品はレジンに気泡が入っていたり膜になる部分が隅々まで完璧に流れてるわけでもない完璧な品物ではない気がしますがサイズはぴったりで円の部分がしっくりきます。両面テープも3M　200MPのテープなのでおそらく耐久性はあるでしょう。元のピックガードはドライヤーで温めながらはがして塗装を傷めないタイプ有機溶剤不使用ののシールはがし剤ディゾルビットを使用しました。これはとても良いです。
木田わをん
2024-11-27 20:49:55
Gibsonだけでなく私のMorrisにも合いました。貝の花が見る場所によって全然変わります。付けるだけで高級なハミングバードになりました。オススメです。
しーくりおね
2024-11-25 14:10:37
まず、こんな奴いないというレビュー投稿です本物Gibson　Hummingbird VC (１９９０年製）御覧の通りピックガードの絵がかき消えたライブなど参加すると”何というギターですか？珍しいですね！”と・・・なのでオリジナルにこだわらないので貼り換えようとした。重ねてみると・・・一回りも大きさ違う。結局、オリジナル剥がすの躊躇して額縁に入れ飾りました。飾るには最高の品でした。（マイコレ）　額縁もうすこし良いのに替えます。エポキシ樹脂固めなのですんげー重量あります。”まぁ！綺麗！”と言われたい方におすすめ。