Your cart is empty.
Your cart is empty. HUAREW GY521 MPU6050 Module (3 axis gyro+3 axis acceleration)
Use：
Motion processing database supports Android, Linux, and Windows, for building self-balancing drones and vehicles, projects with Motion sensing game,virtual reality devices,GPS navigation, DIY robots and wearable sensors for health, fitness and sports etc.
Specifications：
Chip: MPU-6050
Pin pitch :2.54 mm
Collision tolerance:10000 g
Gyro operating current: 5mA
Gyro standby current: 5A
Accelerator operating current: 350A
Communication: standard IIC communication agreement
Power supply: 3-5 v (internal low voltage difference voltage stabilizing)
Acceleration Range:±2g、±4g±8g and ±16g
Gyroscope Range:±250、±500、±1000 and ±2000°/sec
Accelerator power-saving mode current: 20A 10Hz
VDD supply voltage:2.5V±5%, 3.0V±5%, 3.3V±5%; VDDIO: 1.8V±5%
Characteristic:
1.The built-in frequency generator has only ±1% frequency variation over all temperature ranges.
2.Removed sensitivity between accelerator and gyroscope axes, reducing setting effects and sensor drift.
3.The digital motion processing engine reduces a load of complex fusion algorithm data, sensor synchronization, posture sensing, etc.
4.Built-in operating time deviation and magnetic sensor calibration calculation technology, eliminating the need for additional calibration by customers.
5.Programmable interrupts support gesture recognition, zooming, scrolling, rapid descent interrupts, high-G interrupts, zero motion sensing, touch sensing, and shaking sensing functions.
Packaging includes:
3 pieces GY521 MPU6050 Module(3 axis gyro+3 axis acceleration)
Customer
2025-06-30 16:45:32
These are easy to use components that seem to work out of the box with any relevant I2C arduino library. I quite liked that there were two different header types that came with the module that can be soldered vertically or horizontally onto a protoboard. It makes it easy to have more complex circuitry with the extra room.For some reason, I seem to have only received 2 out of the 3 modules, which is unfortunate, so I have deducted a star. Otherwise, these work fine.I am unsure if multiple of these can be run on I2C together due to addressing, but maybe one of the pads can be jumped to change the address.
3D graphics guy
2025-04-06 10:05:18
These are just components, they are not a kit for beginners with guided instructions and such. That said, for those with experience with microcontrollers or beginners willing to research on their own, these boards work great. I picked one of the three at random to test and I was able to quickly locate some micropython libraries and installed them on a Pi Pico. I then soldered one of the sets of headers onto the module (it generously came with both straight and right angle headers). I wired up the bread board and put in the test code I found on the same site I found the libraries and it worked like a champ first time.At the time of this review the cost was just under $10 for a set of 3 - a great deal!I am happy to have these ready for a future project and know they will work as expected.Item: HUAREW GY521 MPU6050 3 Axis Gyroscope and 3 Axis Accelerometer Module adopts 16 Bit AD Converter Data Output IIC I2C for Arduino(3 pcs)
Recommended Products
