Your cart is empty.
Your cart is empty.Product Description
Hantek AC/DC Current Clamp CC-650
AC/DC Current Clamp, 400Hz Bandwidth, 1mV/10mA, 650A; It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms.
Hantek AC DC Current clamp 400Hz 650A with BNC connector
Features
1.AC/DC frequency range: Up to 400Hz
2.Effective Measurement Range: 20mA to 650A DC
3.It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms.
4.Its current transducer is composed by permalloy and hall element, which linearly transform the AC or DC current to AC or DC current voltage. And if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms; If connect to a multimeter by banana type connector, you can obtain the current data.
Efficient Measure Range
- 1mV/100mA: 100mA to 20A, multimeter range is set to DC or rms AC 200mV.
- 1mV/1A: 1A to 200 A, multimeter range is set to DC or rms AC 200mV 200A to 650 A, multimeter range is set to DC or rms AC 2V.
Accuracy
- DC current: 1mV/100mA ±(1.5% + 50m A) 100mA to 200A
- DC current: 1mV/1A ±(2% + 0.5 A) 1A to 200 A ±(4% + 2 A) 200A to 650A
- AC current (50 Hz arrive at 400 Hz): 1mV/100mA ±(3%±0.5A) 100mA ~ 100A ±(8%±1A) 100A ~ 150A
- AC current (50 Hz arrive at 400 Hz): 1mV/1A ±(3%±2A) 1A ~ 500A ±(6%±2A) 500A ~ 600A ±(8%±2A) 600A ~ 650A
Application
- Power circuit measurement and malfunction analysis;
- Power electronics equipments measurement.
Correct Test Method
1.Choose correct current range
2.Single line measurement
Oscilloscope Multimeter probe
400Hz Bandwidth, 1mV/10mA, 650A big jaw current clamp for oscilloscope or multimeter with BNC connector
Function show
Show you the specturm frequency interface in detail for you to observe the operation.
What you will get?
1PC* Hantek Current clamp CC-650
1PC* English manual
1PC* Original color box
(Real picture display)
Fred
2025-09-04 15:36:18
This amp clamp is not disappointing at a good price. I wasn't familiar with the Hantek brand until I bought their 1mV/10mA 650A amp clamp. Because of the quality experienced with this tool, I have since purchased other Hantek oscilloscope accessories. . The 1mV/10mA 650A readings are consistent and accurate. Its BNC connector make it compatible with scopes sporting the same connector. Personally, I am using it with a Pico and TopDon oscilloscope. Works perfectly. I have no hesitation recommending this amp clamp.
Ben
2025-08-08 10:39:52
Not bad for the price. Same unit as any major tool brands sell as re-branded.
ddTaylor
2025-06-07 12:10:02
The differential probe is a silly good value for the money and for how it performs. Be careful, though. Open the package right away and verify the unit has not been opened or the cables not cable tied. My unit was clearly opened before I received it and missing some of the packing materials that would indicate it was new and not a return, it had loosely and carelessly wrapped probe cables placed inside the case without any effort or thought, the battery door showed signs it was opened more than once and without much touch and the probe was not clean and didn’t have plastic film anywhere like expected. The wait between my order and opening the package kept me from returning it for a new probe. That said, used or returned, clean or scuffed, it works very nicely on my 2 DSO’s and costs much less than a used differential probe for my Tektronix scope. Check the item and if it’s new it’s a good deal.
latrouve f.
2025-05-09 15:08:55
Good item the wire way too short for automotive purpose.
Snoopy
2025-04-01 16:50:37
I was a bit worried that the limited frequency response would be a problem but it worked well. Would be nice if it had a little more gain, so the scope could operate on higher input settings.I was monitoring 20A pulses on high voltage direct injectors at idle speed.
ThatTubeSound
2025-03-23 10:18:09
The item I received was clearly one that had been returned. The cord was sloppily wrapped around the handle of the current clamp and there are remnants of oil on the plastic housing. I will test the clamp this weekend to determine if it is fully functional and keep it if it is. But I paid full NEW price for this and I do not appreciate receiving a returned item. That's what "open box" sales are for. I'll likely purchase another brand, going forward.
Customer
2025-03-17 16:45:20
Good tools I like ðŸ‘
Your public name
2025-03-12 11:12:32
I tested this amp clamp on a known amp draw that was measured with the same DVOM inline. The amp draw was 280 mA and with the amp clamp, the reading was erratic and 100mA higher. I tried to zero out the clamp multiple times along with different positions and none proved to work. It is cheap but not even close.
Buen producto y llego en lo acordado
2024-12-25 12:50:24
Justo lo que buscaba para completar mi equipo
Redavid
2024-12-12 11:51:19
Product is well made and works great
Recommended Products