Your cart is empty.
Your cart is empty.Product Description
Hantek DSO2D15 Digital Storage Oscilloscope
Product introduction
Hantek oscilloscopes are extensive use in many scopes and well-know for the DSO4102C, and there is a mature technology in this industry. Hantek DSO2000 Series also continue to use the same motherboard and chip-set of the DSO4000 Series and it is a upgrade version.
DSO2D15 is a cost-effective oscilloscope, with 8M memory depth, 150MHz bandwidth, 1GSa/s, 3-digit digital voltage meter, 6-digit hardware frequency indicator functions and abundant SCPI remote command control. This lab oscilloscope supports BUS decode and protocol analysis includes RS232/UART, I2C, SPI, CAN, LIN. This DSO2D15 digital oscilloscope can connect the laptop, that allows direct and efficient observation of data. The function of this oscilloscope is suitable for use in personal hobbies, maintenance devices and small-scale laboratory. Hantek DSO2D15 oscilloscope is a professional device in many industries, such as communications, aerospace, embedded systems, computer, R&D, education and so on.
Support arbitrary waveform output,14 kinds of trigger modes, standard with 5 kinds of serial protocol triggers and decodes; 32 kinds of auto measurements with statistics;
PC software only supports windows7/8/10 32-bit and 64-bit, do not support OS
Model: DSO2D15
- 150MHZ analog channel bandwidth
- 2 channels which are respectively controlled by independent knobs
- Built-in 1 CH 25MHz waveform generator
- Sampling rate up to 1 GSa/s
- 8M memory depth
- Vertical resolution: 8bit
Key Features
- Vertical range 2mV/div ~ 10V/div
- Trigger: Edge,Pulse, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC
- BUS decode and protocol analysis: RS232/UART, I2C, SPI, CAN, LIN
- Save multiple data formats, such as settings, waveforms, reference waveforms, CSV, pictures
- A 3-digit digital voltage meter and a 6-digit hardware frequency indicator
- 32 kinds of auto measurements with statistics, real-time statistics of maximum, minimum, standard deviation and etc.
- 2 sets of digital voltmeters
- Support threshold testing, free measurements within the screen
- Abundant SCPI remote command control
- USB Host/Device.
1CH 25MHz waveform generator, support arbitrary waveform burst output, support modulation waveform output
32 kinds of auto measurements with statistics
Can save 10 sets of reference waveforms, CSV waveforms and settings. The USB one-click screenshot function.
2 sets of DVM, 3-digit digital voltage meter and 6-digit hardware frequency indicator functions
8M memory depth, reducing waveform distortion and restore real waveforms
Serial bus trigger and decode, with the protocol monitoring function
PASS/FAIL
X-Y format and display in dual windows
Applications
- Electronic circuit design and debugging
- Electrical circuit function test
- Inspect instantaneous signal
- Industrial control and measuring
- Products quality control
- Education and training
Accessories
what's in the box?
- A Passive Probe*1 - PP150B(150MHZ)
- A High Voltage Probe*1 - P4100 (100MHz/100X/2000V)
- A Test Lead with two clips*2
- A Power Line*1
- A USB Line*1
Leno
2025-08-05 16:49:18
I was accustomed to using Hi-End test equipment while I was in the Navy. The Tektronix 100 MHZ Oscilloscope was basically standard equipment at every command I served at. The 150 MHZ Hantek DSO2D15 that I bought, really impressed me from the moment I unpacked it. I noticed right away that all the components were durable and of high quality, especially the Oscilloscope and the 10:1 probe. The scope has a square-wave-output post and a ground post for calibrating your probes. Just for fun, I re-calibrated all the probes that I had stored away and gathering dust on my workbench. The internal signal generator is rock-solid and you can course or fine adjust the output frequency up to 25 MHZ, which is perfect for my Ham Radio needs. You can download firmware updates and the 68-page user manual from Hantek.com. I couldn't find a paperback of the manual, so I'm going to print it out as a double-sided document in order to save paper, because I habitually prefer to make notes as I study any technical manual. I am very happy with my new Hantek Digital Oscilloscope and I hope that you will feel the same way with yours. Good luck!
R. Stanback
2025-08-02 14:49:00
I needed a small bench scope. the Hantek works as advertised. I did update the code and backup the critical data for future updates.
Omega Man
2025-07-31 13:23:44
I haven’t yet used this extensively, but it seems to be good enough for hobby/educational use. If you use one of these a tremendous amount then you’re probably going to want at least a Rigol or Siglent with similar specs. But otherwise it’s OK.The main drawback you will notice with this less expensive scope is the slower CPU. This doesn’t seem to affect data collection, since that is done with an FPGA, but it does mean that the display updates more slowly than average compared to other scopes.There is a lot of information about this scope on the eevblog forums, including “hacks†and “mods†(not all of which risk bricking the device, but recovery from bricked condition is also covered). Also info on the design and limitations, when a firmware update is worth it, and backing up the device. So it is worth checking all of that out before buying.If you don’t already have a dedicated stand-alone AWG/AFG (signal generator) I would recommend getting one of the models with that because this will allow you to do some measurements on passive components much more easily than if you don’t have one. Usually the built-in signal generators are not as capable as a specialized standalone version, but are still sufficient for quite a bit of stuff.The main non-obvious tip I can think of with this scope is: don’t plug in the rear USB and try to insert a USB dive in the front connector at the same time because one of the cost-cutting measures on this is that both USB connectors are wired to the same USB port hardware. So the two USB connectors are actually the same USB port and will not work if both are connected to anything. Only connect one or the other at any given time.
Teron Adams
2025-07-21 12:31:57
Multifunctional and accurate.
Melvin S.
2025-04-08 12:15:43
Great little O-scope. Light, small, and straight forward to use. After not having touched one for 30+ years I got along just fine with this straight out of the box and without having to brush up on my O-scope skillsBest part: it paid for itself on my first repair job!!!!!
AzPsdnym
2025-04-01 18:46:34
There are writeups about this scope that are out-of-date. It has been through a bunch of firmware revisions that have cleaned up much of the original instability. I highly recommend carefully reading major online discussions about this scope (particularly eevblog) and how to apply firmware updates (after doing a complete backup). I purchased this in October 22. The scope worked well even before any updates, and with the ones I applied (firmware version 3205 and USB fix.upk), everything I've tested works as expected (including UART trigger/decode). Don't expect precise measurements at high frequencies (e.g. over 5mhz). And don't expect the Auto Set button to do all your work for you; you have to learn to operate the scope to zero in on the part of the signal you're looking for. But in the typical range that I'm using it, the measurements are quite usefully accurate. I've gone through just about every function on the scope, and they all work as expected. it's a dream come true for me: a real, capable, full-featured bench scope at this price. WOW!!Update: The scope can be "finicky," meaning it locks up pretty easily if you misconfigure settings. Oscilloscopes have a lot of settings, and this one is no different in that regard. It's easy to go wrong. The remedy is to power off and power back on, which goes pretty fast (under 10 seconds), and to then correct your settings. It's been a learning process for me (I'm a beginner). Also, FYI, I use the scope for examining and diagnosing low-power microcontroller circuits (Arduino, ESP32, Raspberry PI). I continue to love this scope, despite its temperamental nature. (Hopefully future firmware updates will continue to improve the scope.) It's been delivering great new graphical visualizations of what's going on with components in my projects. WOW again!
slowreader
2025-03-26 14:46:22
Although the chassis/enclosure of this device is light, plastic, and feels cheap, the functionality is pretty impressive. It is so nice to have a signal generator and scope in one box. You will probably never need all the waveforms this thing is capable of generating. Besides the nice color visual display, the device offers you a pile of statistics relating to that display. Pretty insane for the price.
Paul SKELTON
2025-02-28 11:40:35
I just needed a scope for some audio amp t/s. I could trouble shoot about anything with scope.
TRAN
2025-02-24 12:47:05
Je l'utilise pour mon passe-temps
Kunde
2025-02-10 11:18:21
Die Lieferung und Verpackung waren perfekt, aber nach einer Stunde testen und messen war mir klar, das ist für mein Vorhaben nicht geeignet.Gut es ist unschlagbar günstig aber selbst eine 9V Batteriespannung wird mit Oberwellen aangezeigt, da ist die Abschirmung zum Netzteil wohl recht mager.
Naser Taghipour Osalo
2025-02-08 16:15:40
I used this Oscilloscope for first time . It was so good .
Tony O.
2025-02-07 13:35:14
I gave this 'scope a quick try-out & it is an excellent entry level tool. I have not used it "in anger" yet 😀 . But am very happy with what I have seen so far.
Maurizio P.
2025-01-24 11:41:50
Anche se non considerato un oscilloscopio professionale vale assolutamente di più rispetto al prezzo di vendita.Note Positive (senza dilungarmi sulle caratteristiche tecniche che sono specificate dal costruttore):Ottimo rapporto qualità /prezzo;Notevole la quantità di misure visualizzabili e di riconoscimento e decodifica (con visualizz. numerica del dato)protocolli di comunicazione (RS232 I2C Can ecc);Ottima la possibilità di memorizzare la forma d' onda e fare le misure spostando gli appositi cursori;Divese possibilità di archiviazione su suppoto usb esterno;In dotazione anche una sonda con attenuazione 100x oltre alla classica 10x 1x;Servizio assistenza molto gentile e disponibile;Menù ed help anche in italiano ma chi usa un oscilloscopio dovrebbe selezionare l' Inglese;Manuale uso discreto in Inglese (da scaricare), più un secondo manuale per i comandi remoti via pc o altro dispositivo;Consigliato per studenti, riparatori e piccoli laboratori, diverse funzioni sono tipiche su strumenti decisamente più costosi;Firmware facilmente aggiornabileDisplay regolabile per una visione ottimale (controlli separati per luminosità , intensità della gliglia ed intensità del segnale visualissato)Note NEGATIVESe proprio devo elencare qualcosa di leggermente negativo sono:Mancanza della seconda sonda da 150 MHz 1x 10x ma a questo prezzo non mi lamento;Le manopole di regolazione hanno un po' di gioco quindi danno l' impressione di dover essere trattate con i guanti (ma credo che qualsiasi oscilloscopio meriti di errere trattato con i guanti), comunque, nel complesso la qualità realizzativa mi sembra buona;Firmware migliorabile per quanto riguarda la reattività ai comandi che a volte non è immediata.Nel complesso ripeto vale abbondantemente il prezzo pagato (205 euro).
Recommended Products