Your cart is empty.
Your cart is empty. Integral injection molding makes the usage more flexible and the oscilloscope able to adapt more testing situations.
Attenuation ratio: 1x and 10x optional. Compatible with domestic and international digital and analog oscilloscopes in relevant frequency.
Features:
Performance & Characteristics
Attenuation ratio: 1× and 10× optional.
Portable design according with ergonomics.
Integral injection molding makes the usage more flexible and the oscilloscope able to adapt more testing situations.
Safety standards: it has passed the CE Attestation of European Community.
Specifications:
Attenuation:x1 x10
Input resistance:1MΩ: 10MΩ
Input capacitance: x1: 85pF-115pF x10: 18.5pF-22.5pF
Compensation scope: 15pF-35pF
System bandwidth: x1: DC-6MHz x10: DC-100MHz
Input voltage: x1: Cable length:120cm
Temperature scope:Operation: -10℃--+50℃ Not Operation: -20℃--+75℃ Humidity: ≤85% (Relative humidity)
Application Fields:
Compatible with domestic and international digital and analog oscilloscopes in relevant frequency. Measurement in intermediate and low frequency signals. Package Including:
Accessories included by PP series passive voltage rapier
● Operation manual
● Adjusting tool: adjusts compensation capacitance to assure the rapier match with oscillograph.
● Contractive-type acuminate hook
● 12cm earth wire with alligator clip
● 3 pairs of colorized cable markers
● Locating sleeve adapts to IC testing.
Ted
2025-08-15 14:57:19
I built a jye scope a while ago and have been very happy with it overall. I think I got the kit for less than $20 and it took like 20-30 minutes of soldering to get it assembled. it's only drawback, to me, was the 50V limit. now with this 10x probe I can easily view voltage above 50V. I've used it so far on 110V from my outlet with 10V scale to see the AC wave from utility company. I plan on using this to see some 230V graphs also. The connector is standard, so it attaches perfectly and is a secure fit. fantastic product
Olle Gladso
2025-07-30 14:47:14
It is not a Techtronix or a LeCroy, but for normal use, it is great.
Larry Ray Roder
2025-07-25 12:47:21
good quality
Vern C
2025-07-21 14:06:54
Replace a damages probe
SteveB
2025-07-12 13:19:59
Work fine for me.
B.Huey
2025-06-16 12:34:18
Easy to use, and calibrate
Curt Wuollet
2025-06-03 10:16:49
These don't do anything exceptional or special, in fact they are pretty much identical to what came with the DSO. Mine was used for factory automation which was tough on the probes, so I bought a new set. The exceptional thing about these is that they do the job and are extremely cheap as scope accessories go. A set of Tektronix probes, excellent as they are, might cost more than my Hantek DSO1502B. That's OK, I suppose for industrial use but kinda rough on the home shop crowd.
JeffB
2025-06-01 11:15:20
I purchased this item to replace the inexpensive alligator clips that came with a small portable oscilloscope that I purchased on Amazon a few months earlier. I read a few good reviews so decided to purchase it. It provides the 10X attenuation function that I was needing. It seems well built and it performs well under the fairly basic conditions that I am using it. Very happy with my purchase.
Ted
2025-05-14 18:20:51
I built a jye scope a while ago and have been very happy with it overall. I think I got the kit for less than $20 and it took like 20-30 minutes of soldering to get it assembled. it's only drawback, to me, was the 50V limit. now with this 10x probe I can easily view voltage above 50V. I've used it so far on 110V from my outlet with 10V scale to see the AC wave from utility company. I plan on using this to see some 230V graphs also. The connector is standard, so it attaches perfectly and is a secure fit. fantastic product
Olle Gladso
2025-05-11 16:56:22
It is not a Techtronix or a LeCroy, but for normal use, it is great.
Larry Ray Roder
2025-05-10 13:09:09
good quality
Vern C
2025-03-04 16:48:58
Replace a damages probe
SteveB
2025-01-20 17:57:58
Work fine for me.
B.Huey
2025-01-13 10:16:07
Easy to use, and calibrate
Curt Wuollet
2024-12-22 14:22:43
These don't do anything exceptional or special, in fact they are pretty much identical to what came with the DSO. Mine was used for factory automation which was tough on the probes, so I bought a new set. The exceptional thing about these is that they do the job and are extremely cheap as scope accessories go. A set of Tektronix probes, excellent as they are, might cost more than my Hantek DSO1502B. That's OK, I suppose for industrial use but kinda rough on the home shop crowd.
JeffB
2024-12-20 15:35:16
I purchased this item to replace the inexpensive alligator clips that came with a small portable oscilloscope that I purchased on Amazon a few months earlier. I read a few good reviews so decided to purchase it. It provides the 10X attenuation function that I was needing. It seems well built and it performs well under the fairly basic conditions that I am using it. Very happy with my purchase.
Recommended Products
