Your cart is empty.
Your cart is empty.This Series 200 factory matched 3-inch registration kit from Hardline Products in silver/black for boats and power watercraft (model SIBKG200) features a smooth cursive font with top to bottom color gradations. This kit contains four sets of A-Z letters and four sets of 0-9 numerals. Easy to mount just peel and apply. These registration stickers are UV coated to protect from fading, and they're also fuel and scratch resistant. They're made from 100 percent lead free inks and vinyl with a waterproof superstick adhesive, and they're tested to speeds up to 100 MPH. The 3-inch registration sticker height meets USCG requirements when installed correctly. Hardline Products is an industry leader in after-market power sports accessories, offering matched registration letter and number kits, decal application and removal fluid, and more for on- and off-road motorcycles, boating, personal watercraft, all terrain vehicles (ATVs), snowmobiles, and karting. Made in the USA.
Ted
2025-09-04 18:52:47
the vinyl is thick and sticks really well without bubbles. it was a fairly easy job to put the letters on, just have to do a lot of prep work, this is what I did:scrape old letters with razor blade + acetone to get all the old glue off (take extra care not to scrape off your registration stickers or other permit stickers that may still be valid like I did!! DOH!!)get a roll of painters blue tape, make a long double strip with sticky side updo not peel letters, but cut the ones you need out with scissors and peel the OUTSIDE part, not the letter itselfwhat you end up with is a bunch of squares with the vinyl letters still attachednow stick the squares to the tape white side down so you're looking at the lettersI did this freehand since you can use the squares as guideswhen you have the letters attached, make another double strip of tape and this time attachthe tape sticky side to the letters themselvesmake sure the surface you're attaching to is clean and dry, now peel back the tape from the white/rear side to expose the glue on the letters. it will come off very easily leaving just the letters attached to the tapeclean boat surface with alcohol to remove residuenow apply the letters to the boat and spend some time rubbing on the tape and letters to make sure letters stick to boatnow carefully peel off the tape from the surface, after that you can use a rag to rub the letters some more to make sure you get any bubbles outdon't use a credit card or anything hard, you'll scrape off the protective finish and mess up the smooth vinyl surface
robert sowinski
2025-08-31 10:56:24
AZ #S FOR my boat. EZ to install, look great
Matrix64
2025-08-20 15:36:18
Very bright, very colorful, very sticky. The material that it’s made out of seems to be very good. I used these on my black mailbox. They make excellent address stickers.
GL
2025-08-12 11:02:27
Easy to install looks great
Steven Mark
2025-06-02 09:28:06
They hold up well on our outside trash cans which we label for trash and recycling. They were a good value and arrived quickly.
Mandolindian
2025-05-21 14:59:05
When needed, this works at a good price.
Mark
2025-05-05 17:06:34
Works very well
Customer
2025-04-14 16:02:27
Thank you
amp3d
2025-04-10 13:09:48
Love this product, but I'm sure eveyrone is wondering how to get all the letters on your hull straight...The best way to do it is this:1) buy some parchment paper (wax paper) from the grocery store. Line up all your decals how you want them to be diplayed on the hull. The wax paper will allow you to move the letters around as much as you want.2) Once you get everything aligned, grab some "transfer paper" from staples (12 bux a roll) or on Amazon. This is clear vinyl with adhesive on the back. Cover your finished product with the clear transfer paper and the letters will stick to it perfectly.3) Peel off the wax paper and you have yourself a single, perfectly aligned sticker with transparent background making it super easy to align.
George
2025-02-20 18:44:42
This looked great but the colour was not significantly different from my boat so it was returned. This has no reflection on the product, just make sure it meets your ultimate need
Liz
2025-02-18 17:59:49
Very good product
Luis J Gomes
2025-01-29 17:09:41
Great quality. Looks sharp
Antonio Melo Vila
2025-01-25 12:55:58
I've used these before so no surprise I would be happy with the results.
Recommended Products
