Your cart is empty.
Your cart is empty.HD Switch Dual Idler Arm Bushing Rebuild Kit. This kit is used to replacement the Bushings, the Critical Dust Seal, the Protective Dust and Debris Cap and Mounting Hardware. This kit is used on Many Idlers Arms that fit John Deere Lawnmowers and Garden tractors.
md220v
2025-06-24 16:08:20
fixed deck issue and was same if not better than JD original parts !!
Don Kerns
2025-06-16 17:31:01
Everything seemed to fit as the original time will tell if they hold up as well
Sassman0
2025-04-25 21:25:53
This kit fits the dual pulley on Edge mower deck configured for Deere G100 mower. The pulley itself can also be rebuilt with new bearings but the spacer between the bearings requires that you must drift the bearings in with correct spacing to avoid binding the bearings. If I had a lathe, I would build an o.d. tube to match the i.d. tube length. Otherwise, simply peck in the second bearing about .005" at a time until bearings are not binding when thru bolt is tightened. Not so easy to space bearings apart if you go too far in. If pulley bearings are ok, and the pivot shaft is not worn too much, this kit is all you need.
Chuckyan
2025-02-13 13:24:55
Worked great easy to replace it fixed the sagging pulley
Recommended Products
$12.31
$ 5 .99 $5.99