Your cart is empty.
Your cart is empty.Product Description
Tactical Helmet ARC Rail Rail Adapter for Tactical Electronic Shooting Earmuff Compatible with Walker's Razor Earmuffs
- Tactical helmet adapters are available in three colors: sand/black/gray.
- Tactical helmet adapters helmet mounts are divided into ARC rail adapter, wendy rail adapter, mlok rail adapter.
- This helmet rail adapter can rotate 360° and can move up and down. The card position of the bracket on the headset can also be rotated. The length of the stand can also be adjusted.
- The ARC rail adapter is compatible with the full line of FAST helmets, ACH helmets, MICH helmets and other helmets with ARC rails on the sides.
Stand Adapter The helmet stand can swing up and down. The adapter swings down to bring the headset closer to the ear.
Stand Adapter The helmet stand can swing up and down. The adapter swings up to move the headset away from the ear.
Stand Adapter Helmet Stand Pole Length Size Adjustable
Both the helmet mount of this mount adapter and the mount rod where the headset is mounted can be rotated 360°.
There is a snap point on the card position of the bracket helmet rail, which can just be snapped on the ARC track.
The bracket is divided into left and right ,and there are marks on the bracket sheet.Pay attention to the distinction when installing
- The bracket marked "R" is attached to the right ear of the headset.
- The stand bar marked "L" is mounted on the left ear of the headset.
- The groove markings on the "L" of the stand bar are based on the shell of the Walker's Razor headset
Adam
2025-08-02 18:36:35
I initially had some of the other adapters for my Walkers that didn't last long. I upgraded to these and it was a world of difference. They easily snapped up and out of the way and secured to my ears perfectly. Definitely recommend them compared to the other style.
The Jedi
2025-07-20 15:16:06
I purchased these to go with the Walkers Razor and they were trash. First, one of the screws between the hanger and bracket that attaches to the ear muffs snapped in half when attempting to install on the ear muffs. After moving to the installing the second bracket to the hanger, I found that the brackets did actually fit on the ear muffs. I tried multiple times to get it to fit, and the cheap plastic finally snapped instead of clicking in place. DO NOT BUY THESE!
andru
2025-07-12 14:09:43
I have these mounted to my OpsCore ballistic helmet as a place filler until I get real ones. So far they've done a good job of holding up but I've only taken them out once or twice. The springs on the mechanism will apply just enough pressure to keep your earpro sealed around your ears but with any kind of move and shoot movement, I foresee an issue.Cool stuff tho
Bob
2025-07-11 21:54:57
Seemed good out of the box but couldn't get one side to clip onto the walker razor, I had to elongated both holes with a small file just a bit before the mount would click on... Also doesn't fit well in the arc rail channels a little loose.
Shawn Winter
2025-06-16 11:40:45
Despite the description saying it does, it will not fit Walker Razor headset, I even ordered the one in the description.
Kawi24
2025-05-07 13:32:38
So far so good. Good and tight but I wouldn’t trust them at all being handled roughly.
Anthony A.
2025-04-29 13:20:44
They work and hold decently even on the ears for a seal but the mount is all plastic and very janky can easily be bumped out of whatever slot it's in and the don't fold away for storage very well
David Lujan
2025-02-15 17:27:17
Very fragile, do not recommend using for real world military activities. I broke the bracket on mine the first day.
Recommended Products
$25.99
$ 12 .99 $12.99