Your cart is empty.
Your cart is empty.HELLA 007793041 12V 50A SPST Mini ISO Relay with Bracket, Multi
Takoon
August 15, 2025
I love it. Relays hold good amps. Excellent product
Jon D.
July 31, 2025
Amazing capacity for such a small relay. The larger tabs I actually preferred. I ended up drilling a small hole threw each large tab on two of these and screw/lock nutting the connections on. I used two of these relays to power a Ford Taurus fan install into a Jeep YJ. They work perfectly!
Kelly L
July 31, 2025
This relay is rated at 50A, and built accordingly! The switched-power terminals are 3/8" female spade, instead of the 'normal' 1/4". The coil terminals are 1/4", which is fine for the current that should be used there. I was unable to find a socket designed for the larger spade terminals, so I made my own using large-gauge wire for the power leads.The package appears to be a bit smaller than the standard Bosch relay.The only downside I'm able to see is that the mounting tab is plastic. It feels pretty strong, but I'd be happier if it were metal.
onetong8r
July 25, 2025
Works exactly as described. Its a relay. Keep in mind its a 4-post (no 87A terminal)
Papa Wheelie
July 24, 2025
No load resisters for each light, a simple unplug then plug in under the seat and my 1st Gen FZ1 is flashing right and using less power while being 4x more visible. A definite must have if you're into improving safety from your older incandecent lights when upgrading to LEDs.
Recovering Programmer
July 20, 2025
As mentioned earlier, two of the spade connectors are extra wide. Was not able to find connectors that size at my local auot parts store, effectively meaning that I had no way to wire in the relay without "extraodonary" measures. Also, if I needed later to replace the relay with a "normal" one, I'd be back to replacing connectors all over again.I'm sure the design is "correct" (shame on me for not knowing that), but you really want to take this into account before you buy this relay.I'm seriously thinking about taking a grinding wheel to reduce the size of the spade so that the relay will be interchangeable with the rest of my wiring.I liked the 50 amps (I'm powering an air horn), but the spade size is a problem. Works fine otherwise ;}
ajones
July 12, 2025
An EXCELLENT relay. As another reviewer has noted, the tab could be made of metal, making for a more rugged device. The tangs could be moved forward, away from the tab; as it is designed now, the large, rearmost tang is a bit too close to my firewall, forcing me to find the very unusual 3/8" wide connectors that are insulated, too.
Mary M. Jackson
May 27, 2025
Excellent quality and works perfect for my needs
daniel b.
May 21, 2025
Lo he usado para mà tractor John Deere 2450, relé del calentador. Funciona perfectamente.
Sweetnet
November 12, 2024
It did the job 😀
Recommended Products
$53.63
$ 24 .99 $24.99