Your cart is empty.
Your cart is empty.
Clock mechanism and hands replacement kit:
Simple design with elegant shape, make your clock looks simple but stunning; Accurate time setting, easy to apply and use.
Suit for repairing, replacing or making a clock.
Specifications:
Material: plastic and aluminum
Power: 1 piece 1.5 V AA (not included)
Dimensions:
Shaft length: 28 mm/ 1.1 inch
Clock movement case: approx. 55 x 55 x 16 mm/ 2.2 x 2.2 x 0.63 inch
Total hour hand length: approx. 90 mm/ 3.5 inch
Total minute hand length: approx. 124 mm/ 4.9 inch
Total second hand length: approx. 149 mm/ 5.9 inch
Length from center hole to tip:
Hour hand: approx. 85 mm/ 3.3 inch
Minute hand: approx. 120 mm/ 4.7 inch
Second hand: approx. 109 mm/ 4.3 inch
Package includes:
1 x Quartz clock movement
1 x Minute hand
1 x Hour hand
1 x Second hand
1 x Plastic washer
1 x Brass washer
1 x Brass nut
1 x Metal hook
oley
2025-08-27 11:45:19
I purchased this and replaced the non-working one on a large clock I have. It worked extremely well, the hands fit beautifully on the clock, and it was inexpensive. Great item to repair any non-working clock mechanism. Just be sure to get the right size (e.g., 28 mm, etc.).
Charles M.
2025-07-11 15:03:57
The original clock had HUGE hands: an 18" x 18" frame with a 7" minute hand. My wife LOVED.Nine years ago I had replaced its mechanism but had to drill our the center attachment point of the hands to fit the new mechanism. When it too died, she wanted to keep the clock as she had never seen one that large in a house!Since this was the second mechanism replacement for the clock, the hands had already been modified (drilled out) to fit the first replacement 9 years ago.It was easy to form up a glue soaked piece of newspaper, drill a hole in it slightly smaller than the mechanism. I then glued the hands to it and pressed the combination down onto the mechanism.New mechanism has been keeping time reliably for the last two months. Happy wife, happy ... you get the picture!
christopher M.
2025-07-10 13:33:34
Very simple instructions and installation.Hands are quite delicate so when pressing them in be careful.
racquetjackie
2025-06-13 18:05:51
We bought a different type of mechanism and it didn’t work. Do glad this one dies!
james91g
2025-05-24 13:45:49
The hands literally did not fit the shaft of the clock mechanism, the hour hand in particular. The holes just weren’t the same size. This was for a gift, so we tried to force it, tried to shave and modify the shaft, ended up breaking it, trying to fix it with superglue, and in the end did not have the gift to give for Christmas. We’d broken the item so did not return it.
bobby
2025-05-20 15:36:29
Designer kitchen clock stopped working. $12 fix for a $75 item a no brainer!(Note: only light pressure needed to position the hour hand)
S_Richards
2025-05-18 16:11:38
This clock works well. I needed one with a longer shaft as I epoxied a photo of my son into a nice frame which was very thick. However the hands were too large! I wrote the Seller asking if I could purchase smaller hands and he/she never answered. That put me off.I took some side cutters (dykes) and cut them to size then used some white paint I had for a model I was making and used it on the tips where I had made my cuts. However, rather than going through all of this, if the Seller had answered and was able to sell me smaller hands, I would have purchased them. At least the Seller should respect inquiries and say "No" if he/she can't provide smaller hands.The clock mechanism does keep accurate time. And yes, it does make a quiet noise. If you are in a totally quiet room and are sensitive to light "click" the clock makes.. I suggest purchasing a more expensive quartz clock which is quiet.The reason I gave this excellent mechanism only 3 stars is because of the following:1) The Seller never did answer my question about purchasing smaller hands. I feel this is disrespectful.2) I had to cut the hands down and paint the tips myself to get them to look correctly against the framed photo.If you need an excellent clock with a long shaft and long hands... then buy this one. It is excellent.
Elmyr
2025-05-13 17:38:54
As described. It keeps good time. The ticking is loud if you do not have the mechanism behind anything, but I personally like that.The metal hook for hanging is sturdy and I was not able to bend it without considerable effort. The clock I made is probably at least 3 lbs, and it supports the weight without issue.
Jose Manuel
2025-05-04 18:55:57
Me gusta, va bien ðŸ‘
Leloup Bernard
2025-04-18 14:49:46
J'ai commandé ce produit pour réparer mon horloge murale dont le vieux mécanisme était HS.Installation facile avec petit plan joint.Fonctionnement impeccable depuis 2 mois avec mécanisme silencieux. Mesurer la longueur de l'axe afin que le mécanisme permette une sortie large au niveau du cadran. A vérifier donc et savoir que les aiguilles sont découpables ce qui permet de les ajuster â la largeur du cadran.
Ana
2025-04-11 14:29:24
todo bien
Nancy Therrien
2025-04-02 10:26:59
Je recommande. Il y a plusieurs grosseurs et sortent. Vous trouverez sûrement celui qui vous plaît
Francesca
2025-02-19 14:06:27
Ho risistemato l'orologio di casa, buone le lancette, il ticchettio non è particolarmente fastidioso.
Recommended Products
