Your cart is empty.
Your cart is empty. Features:
High temperature polyimide film tape is RoHS compliant, has excellent heat & solvent resistance. Applicable for automotive sensor and manifolds, insulating circuit boards, etching, fiber optics cable, high temperature powder coating, semiconductor manufacturing and wave soldering during circuit board assembly. It is mainly used for consumer electronics, solar photovoltaic and wind energy, aerospace, automotive and industrial applications.
Specifications:
One-side self-adhesive design
Color: Tawny
Material: Polyimide film
Heat Resistance: The highest temperature up to 572 ℉ (about 300℃)
Adhesive Power(N/25mm): 7.5
Tensile Strength(N/25mm): 115
Elongation: 55%
Breakdown Voltage: 4.5kv
Package Include：
2 inch (50mm) X 108 FT (33M) high temp tape x 1pcs.
M. Henderson
2025-08-22 11:31:39
Using this as a shim on my 3d Printers to do some more fine leveling of the headed bed for a Voron 2.4. It works well and survives the temperature well. I have reduced the variation of the bed by 50% and I just started. The less the bed varies the easier the leveling and printing goes. Doesn't seem to affect the heating at all.
JeepGuy
2025-08-20 21:02:06
Ok, so first let me say that the individuals saying this tape is no good are either not using it correctly or just have no idea how to properly use it. This is some nice thick tape with excellent adhesive strength.I just received it yesterday and have already printed on it multiple times and currently have one in progress and another starting. I use this on my PEI build plates when I print either tpu or petg as I don't want to risk damage to my build plates, a little glue stick as a release agent (yes you read that correctly, in 3d printing glue stick not only promotes some adhesion it also acts as a release agent for stickier filament types)I was using a "name branded 3d printing specific" kapton purchased from Amazon however it was not very effective so I decided this time to get a different brand and I am very happy that I did as this stuff beats anything I've used to date.Application is tedious as is it usually is when using kapton tape, applied without water or alcohol it adheres perfectly, make sure to use a putty knife to work the bubbles out.Using kapton tape gives a nice shiny smooth surface and if applied correctly will allow the texture of your build plate to come through which adds to the finished products' overall quality.Thanks for a great tape guys, I will be returning when I need more
Customer
2025-05-13 12:22:28
This product was used for patches on hats!! Excellent product.
Brandon c
2025-05-05 13:44:14
Great deal and even better product would buy again
Igotgear
2025-05-02 15:24:18
Product as described
Davey (actual real purchaser)
2025-04-30 15:40:20
While this is much thinner and would not count on it to prevent any punctures, even by blunt objects- it's so cheap that it makes sense. The thickness might even be listed on the listing and I just overlooked it. Good quality, but if you need something thick (like over the tops of batterys) you may want something thicker.
Dale
2025-02-02 18:22:13
Used the heat tape to protect my vinyl siding , on my garage, where it meets driveway. Had a new driveway installed and did not want the hot blacktop to melt the siding. Years ago I had a resurface done and the hot blacktop melted the bottom of the vinyl columns on the garage. This time I put the tape on the vinyl siding where it meets new blacktop and the hot blacktop did not melt the siding. Worked out well. Tape came off the siding well.
StevenWR
2024-12-26 09:24:15
nice tape will buy more when needed odd that it did not come in a box like the other roll i bought a long time ago. I dont use it much but when needed i have it at least
Recommended Products
$85.94
$ 41 .99 $41.99