Shopping Cart

Your cart is empty.

Your cart is empty.

HiLetgo 12V 6 Channel Relay Module Self-Lock Interlock Relay High Low Trigger Relay Module 3 in One

5.0 (10) Write Review
Free shipping on orders over $29.99

$17.49

$ 7 .99 $7.99

In Stock

About this item

  • HiLetgo 12V 6 Channel Self-Lock Interlock Relay Module
  • Supply voltage : 12V (DC)
  • Maximum power consumption : 300mA
  • High & Low Trigger


Descriptions:
Every Channel has a signal indicator can know which way switch at work
Working with self-locking / interlocking / Trigger (jog) three options.
Self-locking is to click, the relay, and then click the relay off. 6-way self-locking independent of each other, You can also add the trigger switch (CH Terminal Blocks), with high or low trigger (optional), Can simultaneously control 6 way, such as lighting control and so on.
Trigger (jog) relay when pressed, release the button to close the relay. You can also add the trigger switch (CH Terminal Blocks), with high or low trigger (optional). Applicable to such as electric doors, electric door locks, And SCM docking requires only a high or low pulse circuits circuit.
Interlock fan design is a typical application, when S1 S1 pressed the relay; When pressed S1 S2 disconnected, S2's relay. 2-way interlocking only way to turn, you can also add the trigger switch (CH Terminal Blocks), With high or low trigger (optional). Practical applications such as fans gear switch circuit.
Electrical parameters:
Trigger voltage: LOW is 0-2.5V, high defaults to 3.5-5V ( If 12V voltage trigger, you need series connection a 5.1-6.8K resistor; 24V voltage trigger, you need series connection a 15-22K resistor, otherwise it will burn the chip)
Supply voltage : 12V (DC) Maximum power consumption : 300mA
Load : 250V 10A (AC) or 30V 10A (DC)
1.DC +: Module power supply, 12V DC+
2.DC-: Module power supply , 12V DC-
3. IN1£­IN6: 1-6 channel trigger relay control terminal , High or low trigger
4. TRV+: External trigger positive power supply
5. TRV-: External trigger negative power (If you want an external trigger ,please unplug the Jumpers Power RTV-and GND, TRV+ and VCC)
6. 6 micro switch: 1-6 channel relay test button, trigger effective when low


Customer
2025-08-11 09:29:27
It simply works there’s a lot of different ways you can control the relays individually or all together or in a group
Geoffrey H.
2025-08-03 12:25:11
I couldn't get my first board to work, I sent it back they sent me another which works.The shorting plugs on the left, TR+ to Vcc and TR- to Gnd, are connecting the coil relay control circuit to an ONBOARD 5 Volt supply. The instructions are a bit muddy about this. If you want to use an external 5v supply, I suppose you would pull the shorting plugs and connect the supply to TR+ and TR- (Vcc and Gnd are the 5v supply side)In order to get the test buttons to work, the right shorting plug (low, com, high) must be set to low-com. Then the buttons will work, as will the channel connections when shorting to the 12v- board power input.My setup is using the self latching option, it works fine, I tested the TR, which is for momentary connection. Push the button activates the relay, release the button, releases the relay.
Guitarzan
2025-06-26 10:22:17
I hooked it up to 12 volts and tried to test it but I was unable to get it to do anything. Even pushing the test buttons did nothing. I’m glad I discovered this before the return window closed.
DW
2025-06-21 18:44:23
Awesome relay board, hi ir low trigger, latching, momentary and interlocking.Interlocking means when one input is selected all the others are turned off, like an old mechanical interlocking switch.
Moombaman
2025-06-09 13:44:19
This relay module works very well, great configuration settings. But - the connection terminal are a big problem, if you need to connect the advertised current handling conductor on the relay side then good luck, getting even a 20AWG wire under these terminals can be very frustrating, much less a conductor rated for 10 amps! - When placing any conductor under any of the terminals, plan to lightly tin them, because some force is required for the insertion.
Customer
2025-06-04 12:11:48
I could not get the unit to function, and there is no documentation available to troubleshoot
Dirty Harry
2025-05-17 21:04:41
Works like a charm.Took longer to figure out to wire than to mount. Would help if a simple wiring diagram and basic instructions were included.
FLUF
2025-05-06 12:09:04
If your planning to use with vehicle electrics don't bother, it's doesn't like vehicle DC, works ok not prefect with a glfully stanlised power supply but even then not great!
kus
2025-02-08 19:54:00
ある目的が有り、このボードに辿りついたのですが、説明文が良く理解出来ず想像した感じで判断しました。物はしっかりとした作りで、機能は目的が達成出来て安心しました。中国語？の為、ボード上にあるジャンパーの意味がわからなかったのですが、試してみると理解出来ました、思っていた以上に高機能でした。ボード上にあるタクトスイッチは動作確認するのに便利でした。中華製ですので、非常に安く、駄目元で買ったのですが、良い意味で期待を裏切られました。贅沢を言えば、説明文をもっと日本人が理解できる様にして欲しいです。
Customer
2025-01-20 16:36:14
Ugh, another scam, read the codes on the chips before you buy kids... treat your self to a proper latching relay like G6CK2117PUS12DC