Your cart is empty.
Your cart is empty. 20PCS 5*7CM Bakelite Prototyping Boards Solder Finished Prototype PCB Board
High-quality bakelite materials
Flat surface and all the holes are in the middle
Material: 94HB Bakelite Board
Holes quantity: 432
Thickness: 1.2MM
Dimension: 5*7CM
Diameter of the hole: 1.0mm appx
Hole space: 2.54mm
Package Include:
20* 5*7CM Bakelite Prototyping Board DIY Kit
BWW
2025-09-02 14:49:18
Good for DIY projects
peteygrizz
2025-08-24 14:03:34
These don’t look like much but they are nice and sturdy and work well. I especially like that the rows/columns are labeled like a breadboard and broken into grids. One of my most annoying mistakes while trying to assemble a prototype is placing a component on the wrong spot.
P. Yale
2025-08-20 21:24:03
They're a bit in the thin, flimsy side, but the holes work for most resistors and other soldering projects. I had trouble with random cracks as I was trying to cut these down to size, so I would use a rotary tool or a small jewelers hacksaw to cut these to shape.
CliftonRMooreJr
2025-08-09 11:20:05
Thank You!
Rickey M. Horwitz
2025-07-31 20:38:13
The thing I like best about these boards is that they are cheap and adequate quality. Solder rework may result in losing a copper pad, so be careful. Second best thing is that they use an organic coating over the copper pads that prevents them from corroding, yet act as a flux during soldering. This coating is a replacement for tin coating that you see on the more expensive bread board products.
Gregory G
2025-07-30 14:32:23
The media could not be loaded.
Kris Ryan Stallard
2025-07-23 16:21:43
I kept trying to just solder some female headers to one of these boards and I had the worst problem with pads lifting. I've never had an issue like this before. I tried on 10 boards over three days before I just threw it all away.
Mnstargazer
2025-03-01 16:56:04
Decent number of proto boards for a small price, but you pay the price in quality, or lack thereof. The pads are not completely etched so some cutting may be necessary. Make sure you use the lowest setting on your iron that you can, and make sure you get it right the first time. Over time I have soldered dozens of pads and a few I had to resolder, which caused pads to lift. I had a few pads lift first first crack as well. And for reference, I have not had that issue with other boards, and consider myself a fairly good solderer, so morale of the story:Get the boards if you want to do a lot of prototyping or making semi-permanent boards, just get the soldering right the first time and don't rely on the pads to stay affixed to the board.Additional information: the holes are a bit wide so as you solder you seem to apply more solder than needed to fill up that hole . And make sure you clean the pads first with a bit of emery.
ãã“ã£ã‹ã„
2025-01-26 14:28:34
ã¨ã«ã‹ã安ã„ã®ã§ã€ã¡ã‚‡ã£ã¨ã—ãŸå®Ÿé¨“ã«ãŠã™ã™ã‚ã§ã™ã€‚åŠç”°ä»˜ã‘ã®ç·´ç¿’ã«ã‚‚。
Midian
2025-01-17 11:13:12
COST: £2.41GOOD:* Perfect for prototyping* Excellent value for money* Sturdy enough for the jobBAD:* As others have noted some holes are mildly off centre, but nothing to worry about and for the price I won't complain!
Customer
2025-01-09 14:14:24
Product was shipped on time, and is exactly as advertised!
MS
2024-12-31 17:02:48
Livré dans un sachet, et bien présente au nombre de 20. Les inscriptions permettent de se repérer plus facilement, et les écartements des trous sont basiques (comme ceux d'une breadboard). Elles se coupent simplement (utilisez une petite mèche de ~2mm pour élargir les trou et plier tout simplement), et permettra de faire des circuits "propres" rapidement. Prévoir tout de même des fils pour les jonctions entre les composants, bien plus pratique que les ponts de soudure.
joaquin ruisanchez gomez
2024-12-26 17:26:58
me gustan como son aunque la calidad no es muy buena pues es baquelita o algo parecido las buenas son de fibra pero relacion precio calidad insuperables pues las de fibra salen caras y para hacer montajes sirven igual estas
Recommended Products
