Your cart is empty.
Your cart is empty. Features:
Dot Matrix: 128x64
Driver IC: SSD1309
Interface: IIC
Voltage: 3V-5V
PIN:
1. GND --- Ground
2. VDD --- Power
3. SCL --- Clock
4. SDA --- Data
Interface: Please choose the right IIC or SPI interface before adding to shopping cart.
Display Color: White/Blue/Yellow/Green four colors optional, please choose the color you like before purchasing.
Packaged included:
1 * 2.42" SSD1309 128x64 OLED Display Module
C. Sutton
2025-07-22 16:53:00
The media could not be loaded.
Jon H.
2025-07-06 17:55:31
This works with U8G2 with the constructor `U8G2_SSD1309_128X64_NONAME2_F_HW_I2C`I used it to make a cat litter tracking device. Looks great, works great. Very large and bright.
pwco
2025-05-31 15:18:13
Trouble-free display that immediately worked upon connecting, and has incredibly high contrast. Two orientations to solder headers or wires, which is really handy.
Nilda Vanderzyden
2025-04-20 10:24:51
The OLED works when you use the U8g2 Arduino library. There was a weird flickering issue that I fixed by powering it with 5V instead of 3.3V on my ESP32 WROOM I also got from HiLetGo. My guess is that 3.3V wasn't enough to display two large boxes on the screen. But, plugging it back in to 3.3V it doesn't flicker anymore... so weird.
Deez Machineez
2025-01-21 12:00:41
Best to use the u8g2 library for this and run it on softwire instead of i2c bus as, most libraries for it may cause conflict with certain i2c devices particularly ones with lower rated clocked speed , overall good display just wish it had more colors
ZK
2025-01-12 12:51:50
It just works. It comes preconfigured for i2c so you don't have to spend days trying to find an spi wiring diagram and software example as most examples are for i2c.
WillG
2024-12-17 13:41:17
I bought this display because its bigger than other Oled's I have seen. Very easy to get working. I'm using it with a Raspberry Pi Pico running Micropython. The library code has many functions for the display and is well documented.
Jesse Thomas
2024-11-30 17:59:46
Looking for a replacement for the 1.3 in, this display looks beautiful and looks like it should be an easy replacement with very little work it's nice and bright and very pretty
Recommended Products
