Your cart is empty.
Your cart is empty.Product Description
A Flange Bearing has a wide inner ring with two set screws for attaching to the shaft. The housing is cast iron with a grease zero for re-lubing the bearing. It is designed to prevent shaft marring or burring and centers the shaft in the bore for less vibration.
From the Manufacturer
A Flange Bearing has a wide inner ring with two set screws for attaching to the shaft. The housing is cast iron with a grease zero for re-lubing the bearing. It is designed to prevent shaft marring or burring and centers the shaft in the bore for less vibration.
Chuck
2025-08-24 11:31:17
It's almost the perfect size for the bushing for the swing arm on my 125cc Tao Tao. I had to grind off some length, but otherwise it fit tight. My original steel bushings were worn pretty bad and I expect these oilite bearings will last longer.
Gary
2025-06-09 13:07:46
Quality is good, but they could do a better job of letting you know the dimensions in the description.The inner diameter is 12mm.The outside diameter of the bearing surface measures 17.07mm (measured several times, it is definitely a hair over 17mm).The diameter of the flange is 22.2mmThe flange width is 2.55mm.The overall width is 12mm.
Recommended Products
