Your cart is empty.
Your cart is empty. Note:The color of the item may vary slightly due to photography and your own computer /Phone
Please allow some little manual measurement error.
Note:Check your specific model's manual for compatibility.
Louis
2025-08-27 15:51:44
No issues. Great fit on proline plastic beadlocks and treal aluminum beads. Came with wheel nuts and cross pins. They don't jam in but are not a sloppy fit either. Good product, great price.
Majin
2025-07-09 15:09:03
fit my scx24 perfectly. would order again
mmadog202
2025-06-26 14:03:34
these are a good option to lower your center of gravity on your SCX24. Not all wheel and tire combos are compatible with these. I find them to be hard to keep track of as I have to take them off sometimes for certain wheel swaps.
Casey
2025-06-25 10:34:30
Wanted to keep stock look on my sons scx24 and not add too much weight for the stock motor. These fit right on like stock but slightly heavier.
Customer
2025-06-17 18:54:39
These paired very nicely with the RC4WD Stamped Steel wheels, and fit the stock wheels well too. The included locknuts are great to have on hand since they aren't hard to lose, and are kind of pricy by themselves.
Bill
2025-06-06 18:16:34
I bought these due to getting a set of rc4wd metal beadlock 1.0 wheels and Milestar Patagonias. Those wheels and tires alone weigh more than the stock tires with brass wheel weights inserted. Therefore I didn't need a lot of added weight on the tires and wanted something sturdier than the plastic hex that come with the stock tires. They work great and fit no problem.
Todd M.
2025-05-19 18:26:12
For the price; fine I guess. I 'd buy again. I used these on my new SCX24 C10, had a really hard time getting the hub to seat over the pin. I think that as others mention in reviews, slot not being centered, is likely the culprit. Additionally I had a hard time getting my new stamped steel RC4WD wheels to fit over these but I jammed it on anyways and tightened the wheel nut to help seat it. Unfortunately now I have found that the hubs are stuck in the wheel. This might have been avoided if I had patience and filed down the sharp edges of the hub first. I will order again and try this, so that I can put my other wheels on if I want.
Joseph
2025-02-05 16:57:33
They are easy to install and come with pins which is nice. If you reuse the stock pins you’ll have some extra ones to keep on hand. I’ve used these hex with j concepts wheels and with the proline hyrax wheels, not problem with fit. For the price they come out to be a little cheaper than hot racing ones and do the job. They are not going to add a ton of weight, but every little bit helps with these small vehicles.
Recommended Products
$34.99
$ 17 .99 $17.99