Your cart is empty.
Your cart is empty. Note:The color of the item may vary slightly due to photography and your own computer /Phone
Please allow some little manual measurement error.
Customer Satisfaction Guarantee
If you are not completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange!
Note:Check your specific model's manual for compatibility,or Contact us.
Dennis
2025-08-23 15:04:18
Good solid product, great for back-up tie rod ends if you happen to break your OEM or customs. These little guys will step right in and bridge the gap.
Qwyk
2025-08-02 14:50:34
Do note that you need to either tap or self thread these. I just used a M3 screw to do it. Decent quality for my purposes.
MarkW
2025-07-15 19:25:14
Bought two sets for a robotics project. The plastic end is not threaded but I was able to screw in 4-40 size threaded rod for a nice secure joint. I'm sure 3mm rod would work too. The ball end appears to be brass, and 3mm screw fits it perfectly. Most of the brass balls moved freely, but a few of them were a bit tight but loosened up after moving them around a bit. It doesn't look like the balls will come out of the plastic part easily (which is a good thing).
DSA
2025-04-13 09:13:34
These worked well for me. Perfect fit of the M3 bolt, and these also fit nicely on a 3mm threaded rod. Be aware that the 'ball' has a raised shoulder on both sides so you may need a slightly longer M3 bolt to allow enough thread to come through for a nut.
Steve
2025-03-31 12:12:41
They do what i need them to do
keith wilson
2025-03-23 11:46:02
These are to long.would have to change all rods.might be ok for larger scale cars.
Bob T
2025-01-29 11:05:41
I used a 3mm tap on the plastic and they easy to use with 3mm threaded rod. I then used them to make up adjustable camber links on some of my Tamiya cars.
Dan Bordeau
2025-01-14 18:55:12
These things are CHEAP. The material around the ball is thin and the balls are loose. I was able to pop a couple of the balls out by hand with very little effort. These may be ok for a cheap model. I definitely wouldnt want these on suspension or steering components in a more expensive model. I also wouldnt recommend using them on a 1/10 scale due to their lack of strength.
Recommended Products
