Your cart is empty.
Your cart is empty.Homewerks 3070-250-CH-B-WS Exposed Utility Shower Head Kit, Chrome
CBreeze
2025-09-06 12:37:17
Installed in our outdoor bathroom. Installed easily, looks great, excellent value for the money. Was concerned with others said it was a bit difficult to install. My hubby has done enough home remodel projects, so maybe that is why it was easy for him???? But certainly went in like any other shower set. Only thing is that you are not able to use this with a rain shower head. You would need to add pipe to extend it overhead to use with a rain style. But the whole unit is definitely suitable for the use. Price was way lower than any others we were finding online.
ltlewis15
2025-09-01 13:08:43
Installs easy and comes with standard size fittings. Looks pretty nice and works well with some work. Like others have said, you'll need to remove the plug/flow reducer out of the shower head to get a good flow. To do this is easy.Before installing the head you'll need to disassemble it by unscrewing the front (black) part. It will then come apart and you'll be able to push the plug through to the backside with a small screwdriver. After the plug is out just reassemble. Then you can attach the head to the J pipe and you'll have good flow.
USERBOSCO
2025-07-26 12:17:10
Completely rusted out in 6 months, must be replacedInstalled this over the weekend with some pex as a temporary outdoor shower. Works fine, but you'll definitely want to replace the shower head immediately. The one that it ships with is pitiful. My big concern is the rusty water I'm getting from the hot water side of the valve. I disassembled the system to see what was going on, and you can see that it's already rusting inside the hot water side of the valve. I used brass Shark Bite fittings and it's a home run w/ pex to the copper hot water loop - so it's not the plumbing. If it gets worse, not sure what I'll do, since this is a temp setup.
RON C
2025-06-06 09:08:32
Bought this in 2018 and still going strong.
Anthony Bland
2025-05-23 18:44:32
Made very cheap. Threaded fittings arent very tight and leaks even with a ton of teflon tape. Spout rusted through with in 8 months. Ill save you a headache and not show photos
jd
2025-05-21 16:26:47
Works as advertised. Valve body is chrome plating over cast brass. Riser is steel. Shower head is plastic.My install was outside on a cabin with gravity water supply. Flipped the valve body over so the fittings point down for draining/winterizing. Valves are quarter turn - down for off and pointed out for on. Teflon tape required on the supply fittings, plug, and riser. I popped out the blue flow restrictor in the shower head and drilled it out to 3/8". The supply fittings have 1/2" female thread with a o-ring flange. I used 1/2" PEX for the supply. With about 4 feet head pressure, water flow is definitely adequate to take a shower.
Pastoro
2025-05-10 09:25:54
There are plenty of reviews explaining this is a functional shower, easy to install, and works fine. However, the materials are "questionable," "feel cheap," and the like. The mateirals feel cheap because this is a pretty cheap unit.Thre is a small screw at the bottom for draining the water out of the fixture. In winter, I turn the water off and open the valves, but I have not drained it. This is a mistake in this lower-cost unit. This year, in my 3rd winter (bought summer 2020), the goose neck simply fell off. The shower had rusted from the inside at the connection between the goose neck and the valves.Since I did not drain it, the freeze ultimately broke the pipe. However, I'm giving the product 3 stars because it rusted out from the inside. It should not have done that. And, with the valves open and the water off for months, the pipe should not have broke. Moreover, rust was and is visible inside the unit.Therefore, this review has 2 points:1. Drain it when not in use for an extended period of time, especially in winter if you live in an area that gets below freezing.2. The materials match the low price. This is an inexpensive shower that lasted 2.5 years outside in Texas. Today, I'm buying another one because of the price and in hopes that if I drain it every winter, it will last me more than 2.5 years. I'll let you know if even after draining it in winter, it still rusts out quickly. I'm betting $60 today that it will last longer through draining it in winter.
Ashley
2025-04-27 17:05:15
Just finished installing this today. I'm planning on using it to wash our dogs outside or in garage that has a drain during winter. I had a great dane which we washed in our personal shower but he scratched it up. he passed so bathing a big dog wash not a issue because we only had small dogs left. We ended up rescuing a Irish wolfhound and he hates cold water and local per washing stations are not big enough plus he doesn't exactly fit in a regular shower. Its simple and not high end just simple. Used pex then a 90° spigot so I can make sure it doesn't leak. Washed dog today after installing he was happy it was warm water on a hot day.
ONEIN5
2025-04-24 11:10:03
Nice shower with the exception of the actual up-pipe which has rusted within 2 months of installation. Which is a shame because all the other bits have remained shiny and clear. Once fitted you cannot remove said up-pipe either...
greg bennett
2025-03-04 17:53:41
I couldn't find the right fitting to connect to a garden hose, not the companies fault. Looked like high quality product though!
Client d'
2025-02-16 15:59:59
très bien
AJ
2025-02-11 17:45:41
Excellent quality for price easy to install
John
2025-01-12 10:51:12
Seems solidly made; should last. However, the vertical shower arm, when fully tightened, has the shower head pointing parallel to the wall. Had to back off the shower arm a 1/4 turn, resulting in a slight leak when turned on
Recommended Products
$139.00
$ 62 .99 $62.99