Your cart is empty.
Your cart is empty.Product Description
Nickshopper
2025-09-03 18:46:28
As expected
Larry Dally
2025-08-30 19:31:31
Got for back up while printing, package is well done, looks to be all there. extra thermo guards is nice to have as well.
wes
2025-08-28 17:41:33
This is a nice kit but the nozzles do not fit the kobra 2 pro
Mark
2025-08-26 16:36:52
Every thing about the product is a 1:1 to the original part I got. It comes in a nice plastic case that I will now use to store my nozzles.I don’t know why you’d need 5 silicone shields, I guess I’ll find out. It also came with a nice tool that’s way better than the one that came with the printer.
Jonathan Meyer
2025-08-22 15:02:35
This kit comes in a small, clear plastic container and includes one complete Kobra 2 hot end, five individual silicone socks, five individual 0.4mm nozzles, and a handy wrench. The quality of the nozzles and hot end appear to be adequate. I haven't had any issues with the nozzle I used and the not end appears to be comparable to the original. The silicone socks should last users a good amount of time. I would add a pair of long-handled tweezers to this and keep it right by your printer.
chris andrews
2025-08-20 16:36:15
Great product and case is nice touch
B&M
2025-08-18 18:18:52
This seems to be ok…I am using an anycubic Kobra 2 max. I had to shorten the blue tube by a few mm to get a good fit. Otherwise the head sits too low and smashed into bed when auto levelling. I shortened the tube with a pair of cutters and put the cut end into the head leaving the other end to accept the filament.Check carefully before you cut your tube, but this is the only way I could get it to work on my printer.
Iceman4890
2025-08-07 11:22:56
Ottimo ricambio pari all originale con in più gli ugelli…consigliato per chi ha problemi con l estrusore
Manel Davila
2025-07-26 12:09:22
Compatible Anycubic Kobra 2 plus
3D König
2025-07-12 12:11:11
Macht was es soll
Nickshopper
2025-07-05 15:03:02
As expected
Larry Dally
2025-06-15 16:42:15
Got for back up while printing, package is well done, looks to be all there. extra thermo guards is nice to have as well.
wes
2025-06-11 14:02:17
This is a nice kit but the nozzles do not fit the kobra 2 pro
Mark
2025-06-10 16:03:59
Every thing about the product is a 1:1 to the original part I got. It comes in a nice plastic case that I will now use to store my nozzles.I don’t know why you’d need 5 silicone shields, I guess I’ll find out. It also came with a nice tool that’s way better than the one that came with the printer.
Jonathan Meyer
2025-06-05 13:37:06
This kit comes in a small, clear plastic container and includes one complete Kobra 2 hot end, five individual silicone socks, five individual 0.4mm nozzles, and a handy wrench. The quality of the nozzles and hot end appear to be adequate. I haven't had any issues with the nozzle I used and the not end appears to be comparable to the original. The silicone socks should last users a good amount of time. I would add a pair of long-handled tweezers to this and keep it right by your printer.
chris andrews
2025-06-02 11:23:55
Great product and case is nice touch
B&M
2025-05-09 16:36:27
This seems to be ok…I am using an anycubic Kobra 2 max. I had to shorten the blue tube by a few mm to get a good fit. Otherwise the head sits too low and smashed into bed when auto levelling. I shortened the tube with a pair of cutters and put the cut end into the head leaving the other end to accept the filament.Check carefully before you cut your tube, but this is the only way I could get it to work on my printer.
Iceman4890
2025-04-01 19:40:13
Ottimo ricambio pari all originale con in più gli ugelli…consigliato per chi ha problemi con l estrusore
Manel Davila
2025-02-03 13:48:15
Compatible Anycubic Kobra 2 plus
3D König
2025-01-15 15:05:44
Macht was es soll
Recommended Products