Your cart is empty.
Your cart is empty.Product Description
Press and hold the "OFF/FEED" button, the display shows "Fd10" and the wave pump stops working to facilitate fish feeding.
After 10 minutes, the wave pump will resume operation.
If you need to exit the feeding mode during feeding, press and hold the "OFF/FEED" button.
Long press the "Wi-Le/NIGHT" button to achieve day and night waves.
When the controller is in a dark environment, the wave pump will automatically switches to constant wave mode with minimum flow rate, allowing your fish and corals to rest. When the controller is in a bright environment, the wave pump will automatically revert to the previously set mode.
No wire connection is required, and the wave pumps can be linked and operate simultaneously.
Master control: Press "Wi-Le/NIGHT" button once, "Master" icon will light up, enter master control, master control controller can operate all functions.
Slave-control: Press "Wi-Le/NIGHT" button twice, "Slave" icon will light up, enter the Slave-control, the sub-control controller can only adjust the flow rate, other operations are invalid.
ral337
2025-09-03 20:20:24
I bought this as my return pump for my 40 gallon breeder diy AIO anemone tank. It is easy to install and to program. I like how it transport the water quietly and add some water movement in the tank. It fits well in the chamber. So far, it is working so well that I bought a bigger one for my UV sterilizer. Hope it will lasts me a good years of service.
A. Boehm
2025-08-27 17:05:55
Very powerful, replaced 2 pumps I had for half the price. Controller let's you fine tune a lot more than other cheap pumps I've used. Since you can adjust power and frequency by 1 percent increments, the pump can make a whine , but you can definitely play with the power and frequency and keep the same flow and eliminate the noise. That's why most pumps won't let you adjust so finely and have set programs. As long as it lasts half as long as my last two hygger pumps I'll be very happy
Customer
2025-08-23 14:31:16
The rotor has a small peg at the end of it which was slightly too large to properly spin within the case. As a result the motor would spin for a moment, then stall, and ER04 (motor blocked) would appear on the controller. After manually spinning the rotor inside the casing for a few minutes I was able to wear away enough material for the motor to spin itself. After this, the wave maker worked great in my pleco tank to provide a strong current.
Jake P
2025-08-14 17:27:34
Installed into tank and it ran around 10 min and was moving water really good. Then kept saying error code 4 which is pump blocked. Nothing was blocking the pump at all unplugged reset tried agin multiple times kept turning on then sending error code. Returned.
Anthony C.
2025-07-27 14:41:06
Perfect unit for my 75 gallon. Noise level is very quiet. Very easy to use. All the programs are on the remote controller. Not sure about durability, but seems to be built pretty well. I love that you are able to adjust both pumps in different directions.
Chris P
2025-07-25 09:45:12
Works great in my 30 gallon reef tank at half power. It’s just a tiny bit noisy and sounds like it’s playing music. Great price compared to other brands.
Jonathan
2025-07-22 14:45:20
First purchase of this item was great. Works fantastic and controlling the power is critical for my fish while allowing moving water to prevent algae. Needed a second one to better direct the flow on the other side of the tank. Unfortunately, after getting it set up, I received error code 4 which indicates something is blocking. Nothing was blocking. Reset it a couple times and would work for about 1 minute before the error happened again. Not a problem, returned for replacement. This is where the issue is critical. I received a clearly used device. Was willing to work with it but it didn't even turn on without getting the error code 4. Apparently this device has a big problem with this error code. Returned it and didn't try to get a new one again since it made me feel like the one that has been working for a couple weeks now will eventually have this error happen and make it unusable. Not acceptable for the quality I thought I was getting.
Ryan E. Rogers
2025-07-09 17:23:54
Outstanding wave maker! Keeps my corals and fish happy and it's easy to toggle the different modes.
navz10
2025-07-02 13:08:45
I got this wavemaker due to having a large tank and needed more control of speed, and when I get it under 100 pounds, I've never looked at another wavemaker since. Most of the time I have it on the speed between lowest of 30 to 70 but don't use the 100 unless I am cleaning left over food or waste getting caught by obstacles in the tank.
Bobbybbad
2025-06-25 21:26:11
I purchased this wavemaker for my 90 gal tropheus tank . The wavemaker arrived on time and in good quality. Have had it set up and running now for 2 months . This unit works great ,easy set up with several control modes. With proper settings the unit keeps the tank substrate clear on debris . Also keeps the tropheus occupied and reduces aggressions . Lots of water flow, quiet operation, no suction cups to fail ,and hides well in the tank .
Philip Hartland.
2025-06-23 13:02:54
Do not purchase thus item, controller packed up after less than 2 months, complete waste of money.
W. Armour
2025-06-18 13:08:43
Needed to buy a power adapter for Australian use which is not mentioned in the listing and cost an extra $19.00. Have not been able to use it yet.
Kardo
2025-06-10 16:32:08
El generador de olas ofrece lo que promete y más,la potencia es excelente y el controlador muy intuitivo y fácil de manejar
ral337
2025-06-05 16:56:52
I bought this as my return pump for my 40 gallon breeder diy AIO anemone tank. It is easy to install and to program. I like how it transport the water quietly and add some water movement in the tank. It fits well in the chamber. So far, it is working so well that I bought a bigger one for my UV sterilizer. Hope it will lasts me a good years of service.
A. Boehm
2025-06-04 17:32:11
Very powerful, replaced 2 pumps I had for half the price. Controller let's you fine tune a lot more than other cheap pumps I've used. Since you can adjust power and frequency by 1 percent increments, the pump can make a whine , but you can definitely play with the power and frequency and keep the same flow and eliminate the noise. That's why most pumps won't let you adjust so finely and have set programs. As long as it lasts half as long as my last two hygger pumps I'll be very happy
Customer
2025-06-03 10:47:03
The rotor has a small peg at the end of it which was slightly too large to properly spin within the case. As a result the motor would spin for a moment, then stall, and ER04 (motor blocked) would appear on the controller. After manually spinning the rotor inside the casing for a few minutes I was able to wear away enough material for the motor to spin itself. After this, the wave maker worked great in my pleco tank to provide a strong current.
Jake P
2025-04-30 12:47:20
Installed into tank and it ran around 10 min and was moving water really good. Then kept saying error code 4 which is pump blocked. Nothing was blocking the pump at all unplugged reset tried agin multiple times kept turning on then sending error code. Returned.
Anthony C.
2025-04-10 12:11:15
Perfect unit for my 75 gallon. Noise level is very quiet. Very easy to use. All the programs are on the remote controller. Not sure about durability, but seems to be built pretty well. I love that you are able to adjust both pumps in different directions.
Chris P
2025-03-23 14:07:31
Works great in my 30 gallon reef tank at half power. It’s just a tiny bit noisy and sounds like it’s playing music. Great price compared to other brands.
Jonathan
2025-03-18 11:53:48
First purchase of this item was great. Works fantastic and controlling the power is critical for my fish while allowing moving water to prevent algae. Needed a second one to better direct the flow on the other side of the tank. Unfortunately, after getting it set up, I received error code 4 which indicates something is blocking. Nothing was blocking. Reset it a couple times and would work for about 1 minute before the error happened again. Not a problem, returned for replacement. This is where the issue is critical. I received a clearly used device. Was willing to work with it but it didn't even turn on without getting the error code 4. Apparently this device has a big problem with this error code. Returned it and didn't try to get a new one again since it made me feel like the one that has been working for a couple weeks now will eventually have this error happen and make it unusable. Not acceptable for the quality I thought I was getting.
Ryan E. Rogers
2025-03-15 15:15:33
Outstanding wave maker! Keeps my corals and fish happy and it's easy to toggle the different modes.
navz10
2025-03-06 16:57:19
I got this wavemaker due to having a large tank and needed more control of speed, and when I get it under 100 pounds, I've never looked at another wavemaker since. Most of the time I have it on the speed between lowest of 30 to 70 but don't use the 100 unless I am cleaning left over food or waste getting caught by obstacles in the tank.
Bobbybbad
2025-02-16 14:33:16
I purchased this wavemaker for my 90 gal tropheus tank . The wavemaker arrived on time and in good quality. Have had it set up and running now for 2 months . This unit works great ,easy set up with several control modes. With proper settings the unit keeps the tank substrate clear on debris . Also keeps the tropheus occupied and reduces aggressions . Lots of water flow, quiet operation, no suction cups to fail ,and hides well in the tank .
Philip Hartland.
2025-02-13 14:33:51
Do not purchase thus item, controller packed up after less than 2 months, complete waste of money.
W. Armour
2025-02-06 18:40:08
Needed to buy a power adapter for Australian use which is not mentioned in the listing and cost an extra $19.00. Have not been able to use it yet.
Kardo
2025-02-03 11:55:10
El generador de olas ofrece lo que promete y más,la potencia es excelente y el controlador muy intuitivo y fácil de manejar
Recommended Products