Your cart is empty.
Your cart is empty.Product Description
Cut, Cinch, Removal
PEX Clamp Cinch & Removal Tool Kit
PC-CRP1096 PEX crimping tool kit is Ideal for making stainless steel PEX clamp rings for various uses. All-in-one PEX-B installation tool set with PEX tubing cutter, clamps and cinch clamp tool included.
Meets ASTM F2098 Standard
PEX CRIMPING SYSTEM
PC-CRP1096 PEX clamp installation tool kit is a must have tool for new PEX piping systems and remodeling.
The patented multi-functional design makes this PEX tool unique.
- Crimp the stainless steel clamp ring to barb fittings creating a watertight seal.
- Cut off clamp rings from PEX barb fitting connections to allow fittings to be re-used.
Patented, Multi-functional Design
Clamp Cinching
Mode 1
The tool is factory calibrated and all clamp connections conform to the ASTM F-2098 standard.
Clamp Removal
Mode 2
Switch to Mode 2 and cut off PEX clamp ring in seconds, your barded fittings are now ready to be reused.
-
Clamp & Removal
PEX Clamp Tool
CRP-1096 is a master PEX crimping tool cinches and removes 3/8" to 1" of Cinch Clamps.
-
3/8''-1''
PEX Tubing Cutter
Cuts through PEX tubing like butter.
-
NSF Approved
PEX Clamp Rings
1/2''(20 Pack) and 3/4''(10 Pack) PEX Clamp Rings. Made from resistant stainless for durability.
Faster PEX-B Connections
Pinch Clamp
Choose Mode 1 and cinch PEX clamp by closing handles all the way down.
Cinched
Meets ASTM F-2098 specifications.
Remove Clamp
Choose Mode 2 and cut off PEX clamp.
Removed
PEX fitting is now ready for reuse.
Envision
2025-09-06 18:59:57
I am super impressed with the quality and functionality of the cinch and cutting tools in this kit. Both work excellent. The included assortment of stainless steel PEX clamp rings are also excellent quality. This tool was a game changer for me. It's SO much easier to use than the bulky PEX crimper I have, and it's so much more versatile because it fits in tighter spaces. I'm done using my old PEX crimper, and I will only be using this cinch tool from now on. It is a great value, and it's comes in a nice quality case. If needed, it's simple to remove a cinch ring, and the cinch rings are so much easier to place on the tubing without accidentally moving them out of position compared to a PEX crimper. The connections are every bit as reliable, if not moreso, because the cinch rings are stainless steel as opposed to copper.
Anthony
2025-07-12 13:46:46
I had to shorten some pEX under my kitchen sink to install a new faucet, this was my very first time working with PEX. This tool works well, comes with decent instructions, the bands are good quality and I had no issues using the tool. This was a great purchase and got the cutter, crimper, multiple sizes of bands and got the job done for a fraction of the price. Cramped perfectly the very first time and seems well made.
TH
2025-07-11 11:19:31
The media could not be loaded.
john sayers
2025-07-02 17:45:53
I received it a couple days ago and it looks to be very sturdy and the addition of the pex rings makes it a good value.. the carrying case makes it nice to keep it all together..
J
2025-04-23 12:29:45
The iCrimp PEX Clamp Tool Kit is an excellent addition to my toolbox. For the price, it’s hard to beat. It includes a variety of crimp connectors in different sizes, making it versatile for various PEX plumbing projects. The tool itself is sturdy and well-made, making crimping quick and easy.One of my favorite features is the ability to use the tool to remove rings as well. This saves me a ton of time and hassle when adjustments are needed. The included PEX tubing cutter is sharp and precise, making clean cuts every time.Overall, this kit is a great value for anyone working with PEX. It’s convenient, reliable, and gets the job done efficiently. Highly recommended!
Michael
2025-04-11 11:01:46
I used this cutter and crimper to cut and crimp over 100 pex connections and never had one issue. The crimper also has an option for removing crimps which came In very handy for me. Even comes with 1/2†and 3/4†crimps
Driven
2025-03-23 18:04:26
These PEX crimpers are awesome. I've made up over 100 connections and they are so much easier to use than the long handled blue SharkBite non-ratcheting crimper. I found that they worked better if they are oiled. I lubricated them with some Lucas Gun Oil and they operated much smoother. These were extremely helpful under the house and inside cabinets where there was limited access and not much room to work the non-ratcheting crimping tool. If you're working with SS PEX clamps you need one of these crimpers in your tool box.
Chris Miller
2025-03-02 13:53:09
I’ve never worked with Pex before. I recently bought a travel trailer and its plumbing is 1/2†Pex. The water heater bypass valves were size seized up in the open position, so I decided to take on a little project to replace them. This crimper does a great job of both removing the old crimp rings and installing new ones. The bonus Pex line cutter does a very good job of cutting the lines at a nearly perfect 90°.They are ratcheting, so if you need to reposition, the tool won’t let go.The only cons I can think of are:1) It’s difficult to use one-handed unless you have very large (and strong) hands. I understand that it’s not designed to use single-handed, so no stars deducted.2) the small “knob†that switches the tool between “cut†and “crimp†modes is a bit difficult to turn by hand. It doesn’t protrude much, and it’s small for my big hands, but I haven’t yet had to use a separate tool to turn it.Overall I’m very happy with the purchase.
Customer
2025-02-21 10:39:14
Purchased this tool when I ran into a tight situation installing PEX water lines. I have previously used PEX copper rings for installation, whereas this tool works with the stainless steel version. While the SS rings are more expensive, I can't see myself ever going back to the copper style....ever. The ratcheting function makes these so easy to use with one hand in any situation.Changing from mode 1 to 2 is awkward (install & removal) and I did find them pricey, otherwise I would have given them a 5 star
Connor Mulligan
2025-01-18 18:17:17
The tool does the job and a great price.
phili
2025-01-16 18:59:42
PEX is used more and more widely. This Clamp is very convenient to use and can work in a small space.
Grant
2025-01-03 17:58:40
Worked very well to do home repairs, replace faucets and shut off valves. Nice price point compared to what I was seeing elsewhere. I'll likely rarely use it as I'm not in the plumbing business, but for my periodic home repair and reno use, works very well!
JR
2024-11-26 11:57:34
Worked well for my small bathroom renovations. Compatible with other off the shelf clamps. Good product.
Recommended Products
$19.58
$ 9 .99 $9.99
$22.99
$ 10 .99 $10.99