Your cart is empty.
Your cart is empty.Product Description
CRQ02 Push-to-Connect Fitting Metal Disconnect Tong
The CRQ02 Push-Fit fitting removal tool is designed for the brass push connection to be disconnected from the pipe quickly and easily. Applicable for hydronic heating as well as potable water distribution. It is approved for underground and behind-the-wall applications without access panels. It is fast and easy using disconnect tool. The Push-to-Connect fittings connect copper, PEX and CPVC in any combination and the CRQ02 disconnect tong makes it easy to take the connection apart when needed. This 3-in-1 removal tool works for multiple push-fit fittings of 1/2-in, 3/4-in and 1-in.
Highlights of CRQ02
- Compact design with wide grip handles.
- Easy one-handed operation in tight spaces.
- Quick and easy disassembly.
- Ideal for working in tight spaces.
- Made of carbon steel for durability.
- Demount fittings from PEX, copper, CPVC, PE-RT & HDPE with ease.
Disconnecting A Joint
By applying pressure to the release collar with the CRQ02 removal tool, the grab ring teeth are splayed. This action releases the pipe, allowing it to be removed from the fitting.
- Placet the CRQ02 removal tool around the pipe with the non-marking face against the release collar. The end with the size displayed on the removal tool should be positioned around the pipe and the other end around the neck of the fitting.
- Push the removal tool against the release collar and pull the pipe with a twisting action to release the pipe.
- Check the fitting and pipe end for damage. The fitting and pipe shoud be free of damage, foreign objects and marks on the outside diameter.
schlott
2025-09-05 17:32:11
Works nicely with various Shark bite and generic similar fittings. Makes it much easier to salvage fittings and minimize damage to copper or PEX tubing.
Gil Hofmann
2025-08-24 10:03:39
Product is good.
Odie Haley
2025-08-23 10:59:34
If you have ever struggled to get a shark bite connector off a pipe, this is for you. For years I have fought to get those things loose or out of a tight place. If you’re really strong and have good lower arm strength and hands it’s not too hard. If you’re older, or skinny like me it’s a different story. Those cheap “U†shaped tools are extremely difficult to squeeze hard enough to disengage the stainless steel teeth holding it tight. This tool is different, it has a compound leaver action that multiplies your strength and makes it easy to remove them. A few minutes after I opened the package I had removed enough of them to save two and a half times what they cost. Some of them had been stuck on pipes for years and as much as they cost now there was no way I was going to throw them away. If there is anything at all I would suggest to improve them it would be to make the forks that clamp around the pipe just a little thicker so it wouldn’t give over time, but I guess the manufacturer knew what they were doing because as far as I can tell all the pressure I have put on it hasn’t affected it at all. I rarely say this but if you need this tool, get it, you won’t be disappointed.
Greg Alderson
2025-08-13 11:08:31
Very easy to use
Neil L.
2025-08-12 14:32:54
effective - easy removal of shark bite connector from pek
Mike C
2025-08-07 10:04:01
This makes the release of the sharkbite fitting so easy, it can even be done with only one hand!
Melissa W Ogden
2025-07-10 12:13:51
May be adequate for couplers and valve units, but does not work well on T fittings.
Roseacreates
2025-06-18 17:06:06
I have about twenty fitting that I needed to get off of old plumbing to use as spares in case I needed them but I didn't feel like fighting with them.I had allllll of my fittings removed in less than 5 minutes with this. Absolutely worth the money.They WILL slip if you're being clumzy, but if you take your time? The tool works PERFECT.Used for 3/4 and half inche sharkbites in copper AND cpvc AND pex. Worked to remove from all three painlessly.
Dave Hann
2025-06-06 18:50:34
This tool is a valuable tool for my day to day work.Makes removing shark bite fittings very easy
Jorge Enrique Escamilla Méndez
2025-04-19 17:12:53
El producto se regreso por no poder tener la utilidad con el objetivo que se tenÃa
Customer
2025-03-19 12:46:03
easy to use...works well
Thomas Fleischmann
2025-03-08 20:44:26
Works as described
Lindsay Irwin
2025-02-20 15:49:41
I just received this and really I have to say it's well made,for me a home owner and love doing my own plumbing this will help me in those tight spots to disconnect the PEX from a quick connect fitting,thanks.
Recommended Products
$9.99
$ 4 .99 $4.99