Your cart is empty.
Your cart is empty.Product Description
Designed by the team of IGAN independent lab engineers. It is a very easy-to-use outdoor cover, portable, heavy duty and provide multiple protection, it can come in very handy when you need the power outdoor.
IGAN Inverter Generator Running Cover
Protects your generator investment during inclement weather.
A revolution in generator running cover, with strong protection, toolless installation is designed for inverter generators from 1000 to 2300 watts, and allows you to operate your generator safely outside in nearly any type of weather.
- All Weather Resistance for Safe Operation
- Heavy Duty Tarpaulin
- Quick Disassembly and Easy to Cary
- Dual-purpose: for Use and Storage
The IGAN Advantage
US patent, a multipurpose tent designed for small inverter generators. It allows you to operate the inverter safely whether in rain, snow, high winds or wet weather. While avoiding CO poisoning, electrocution and generator damage.
For Safe Operation
IGAN cover can effectively keep the electrical panel and outlets dry. The bottom of the tent provides sufficient ventilation for heat dissipation and combustion. And a large exhaust port extends outward to ensure that the exhaust gas will not be blocked when the generator is running.
Portable, Easy-to-Use
To IGAN, you can easily assemble or disassemble it within minutes, no tools and non-destructive installation. It's ideal for RV's, camping, tailgating or any recreational activity!
Quickly Take Electricity Wherever You Go
IGAN's unique design allows you to quickly start, plug in or refuel the generator without removing the cover. A large transparent TPU material is used on the front of the cover, so you can check the generator anytime and anywhere.
Dual-purpose: for Use and Storage
- IGAN generator cover is made of heavy-duty waterproof tarpaulin, it can be used as a dust cover to store the generator when not in use.
- The metal tubes of the frame base are 7/8'' in diameter, and the cover also has 4 outdoor tent stakes and ropes. Which has greater stability and safety, and will not deform or collapse even in bad weather.
Important Note
- IGAN inverter generator tent is only for fully encased small inverter generators up to 2300 watts. Not for open framed portable generators.
- Also is not suitable for the models and brands shown in the picture.
- Please contact IGAN if you are not sure whether your generator is suitable.
GlobeTrotter
2025-08-25 11:49:34
After using ply wood tents and various tarps, I finally found exactly what I needed, this IGAN generator cover. This cover is well designed and well built of quality parts. Very easy and simple instructions with big photos. Took maybe 5 minutes to assemble. The tent has many access points for easy access to the generator, closed either by velcro or buckles. There is a generous exhaust opening as well. This is a perfect fit for my Honda EU2000i generator and will be great in nasty conditions and I will know the generator is safe and dry. I will place it under deck steps to protect from wind and rain. A lot of people mention the price..I think it's fair as it's well built and solves a big problem for me. Great product!
Rob Stufflebeam
2025-08-20 12:59:27
The media could not be loaded.
Rick D.
2025-06-15 14:20:52
Great fit for my 2500W Generac inverter, easier to assembly when cloth is warm. good water proof design and heavy duty material
Online Shopper
2025-05-29 17:07:07
There are few choices when it comes to shielding your small generator from the weather elements that knocked out your power to your house and, of course, your generator cannot be placed near the house and especially not in the garage. This tent cover is well made and should last a long time. It also supplies plenty of room (without being too big) for my Honda EU2000i generator. Assembly is fairly fast and it has needed flaps for accessing the generator. I do have one important complaint.......it does not have a floor nor does it have any way to keep the cover over the generator in high winds such as maybe some straps that go from the bottom of one side, then under the generator and then attach to the other side. Instead you have four attachment points for the supplied ropes that then go to provided metal stakes, pretty much how you would secure a camping tent to stakes in the ground. My problem is that the plug for my generator to power my basement electrical panel is located on an exterior wall surrounded by a paver patio. How do I put these four metal stakes into a cement paver patio? It cannot be done so I am going to have to figure out a way to secure this tent cover to the generator without the generator rubbing against it or the exhaust melting it. I have 27 days left to come up with a solution or else I will have to seriously think about returning it.
JT
2025-04-29 15:44:40
Heavy duty materials - much better than most regular people tents, like a vinyl covered heavy duty fabric with reinforced seams and pull points. Easy assembly. It comes with a storage bag but the bag is light weight (cheap, but functional). I really like the rigid covered opening for the exhaust. Plenty of extra rope for 4 stake tie downs and 4 rope tension adjusters included. Reflective silver striping on bottom edge. Also reflective rope for flashlights to prevent tripping over tie down ropes at night. The only thing I changed was to add additional velcro on the side flap vertical sections and a velcro tab above so I can stick the side flap in the open position. Given the cost of a regular people tent I think this is very reasonable at around $100 because most of the cost is in the sewing labor and special parts like connectors, etc. more so than just based on the ft2 a area of materials.
Flizzee
2025-04-26 11:11:32
Excellent product! Fit the Generator perfectly! I would Definitely recommend this product…. It is top notch!
Brian J.
2025-04-25 12:01:00
Got this for my Ecoflow Dual Fuel generator. The cover itself is of high quality and has nice features within it. Assembly is very easy and it breaks down to reasonable sized pieces. There's a flap on the side that I can route the propane inlet easily, the front has a window to see the screen of my generator and have the cable come out from. Overall really nice.The one thing I'm not a fan of: the hood that overhangs the exhaust outlet is relatively stiff - as it should be. However, this makes stowing this in the supplied storage bag really difficult. I spend more time trying to wedge the cover into the bag than I do actually setting it up. Cover is great, supplied bag is too undersized. 20% wider storage bag and it'd be perfect.
len
2025-04-19 17:38:45
Perfect... Item as described..quick delivery
David U.
2025-04-16 21:42:21
Well made, met my objectives. Utilizing to cover a Honda 3200i. Did a 2 hour generator run test, no issues with cover in place! Because of framed cover... quick to place and remove, if required.
Karl-Heinz Schmett
2025-04-09 12:33:46
Die Abdeckung ist Klasse und das Geld Wert Fungtzional an alles gedacht sehr gut ðŸ‘
Customer
2025-01-24 16:13:29
Easily put together, tough tarpaulin cover, access to all required parts of the generator, appears to be high quality product ideal for my 1500w suitcase generator.
Holger Schmidt
2025-01-03 10:18:29
Teuer, aber gut. Ecoflow Smart Generator 3 Tage mit der Abdeckung im Freien problemlos betreiben können. Nichts ist nass geworden trotzdem es 3 Tage nahezu durchgeregnet hat. Öffnung für den Auspuff ist ausreichend groß. Öffnung für den Anschluss vorn, sowie oben für die Tankentlüftung und die seitliche Abdeckung gut zu bedienen.Kaufempfehlung !!!
Recommended Products