Your cart is empty.
Your cart is empty.Product Description
iJDMTOY (2) 912 920 921 T15 Nylon Base Socket/Base w/Pigtail Wiring Harness As Repair, Replacement or Retrofit. For detail fitment information and product specification, please refer to product feature bullet point(s).
Thanks for choosing iJDMTOY for your automotive lightings and accessories!
Mojave Red
2025-08-25 16:04:00
Kept having a corner light burn out and short. Socket was corroded and wouldn't stay inside the housing. Ordered these and spliced them in (also switching over the blinker live wire to make the corner lights the blinkers) and they work perfectly. They fit inside the corner lights like OEM.
Al G.
2025-08-03 17:19:39
It's getting hard to find parts for my old car. The OEM is not making it anymore and Hyundai doesn't keep it in stock either. This one fits my car's front side marker lights on a 2005 Hyundai Accent, and my mechanic soldered the wires to the wires on my car. My car passed inspection. Mission accomplished.Look real close on your old light sockets to see if the fittings are the same -- take a photo of your part and compare. The part is "universal," which really means it could fit many different models of car, but does not fit most cars.
BigSun26
2025-07-14 13:10:24
My 3rd brake light on my 01 is300 went the bulb and the connector were both burnt. Trying to find a replacement connector was a challenge.I decide to order this.-universal I was able to fit the location that I needed and was able to wire it up pretty straight forward after some research. Already prepped to wire just gotta removed the ends-good quality so far has been installed for a week now so far no issues we’ll see upgrade the bulbs to LED. Decent gauge wires.- value you get a pair of connectors to use if needed
joekieliszek
2025-07-03 12:15:25
Hello,These led lamp sockets are quite versatile. They can be retained within a reflector by simply stretching a 9/16"ID o-ring over the 4 protruding lugs that surround the socket. Thanks, Joe
Hanna Whipple
2025-06-16 10:15:57
product will not fit a 2006 4runner signal socket but can be wired in with a smaller bulb... not exact fit
Casey Pedersen
2025-05-01 18:05:50
Tried test fitting the harness into the factory and aftermarket head lamp. Harness doesn't fit properly and won't seal the headlamp protecting it from moisture entering. Very poor fitment, returning and don't recommend.
Anthony Hernandez
2025-04-04 17:43:57
Replaces factory sockets worked well
Rick Judkins
2025-03-21 16:09:08
Good Product.
Jacob & Selam
2025-02-28 14:20:22
OEM look. Fits great for the 921 bulb. Was able to connect it to the existing wire harness to get the factory setup again.Shipping took longer than normal, but arrived on the estimate date.
Mathieu Tousignant
2025-02-08 15:17:19
J'ai reçu exactement ce que j'ai commandé. Deux connecteur pour lumière 912 avec un fil pour se branché. De bonne qualité, je recommande!
Scott S.
2024-12-22 17:07:22
Worked great.
lance nelson
2024-12-17 17:29:47
This product was un useable .Did not fit clearance light socket.Too late to return.Check fitment early .
Keith Carver
2024-12-07 18:15:55
The wrong socket for the jeep
Recommended Products