Your cart is empty.
Your cart is empty.Product Description
Suitable for Mixing Concrete, Cement, oil paint, Putty powder, fodder ,Plaster, Etc.
Specifications
- Voltage frequency: 110V/60Hz
- Maximum power : 2100W
- Rated speed: 270-930 RPM
- Stirring rod length: 23.6 Inch
- Mixing head type: S type Thread
- interface size: M14
- Power cord length: 1.5m
- Mixer Weight : 6.5 lb
IMAYCC 2100W Adjustable Electric Grout Mortar Concrete Plaster Stirring Tool
IMAYCC Handheld Electric Grout Mortar features a 2100W powerful motor, which can mix material effectively and thoroughly. With a 6-speed progressive switch, you can set different speeds depending on the stickiness of the material. Perfect for mixing oil paints, cement, fodder, and other materials.
- 6-speed regulation with self-locking switch, easy and convenient to adjust the speed to meet different operation requirements
- Quick thread interface, M14 quick interface, easy to use, quick to disassemble and assemble
- Ergonomic design handle, comfortable non-slip, stable holding, labor-saving operation
- UL Standar Plug
WHY CHOOSE US ?
High efficiency motor
Ergonomically designed handle
Adjustable 6 Speed
Good Heat dissipation
UL Stander Mixer and power cord
Easy to replace the carbon brush
WHAT YOU GET
Handheld Mixer × 1
Tool Connection Shaff x 1
Mixing Paddle x 1
Installation wrench x 2
Carbon Brush (7*11*15mm) x 2
Gloves x 1
Prepped
2025-09-05 18:21:54
Update 4/15/24The customer service team for this product is excellent for having contacted me to address my quirky mixer, and sent me a replacement without hassle. The replacement mixer has been working as expected, without issue since receiving it.For the money and the awesome customer service, this product gets my 5 star vote… though I do still think in a commercial environment, this machine would be inadequate. But, for the low cost and design, it’s been completely satisfactory for me, a DIY homeowner.I do like the design and the trigger lock is really convenient as well.Original review:I’ve been using this for thinset mortar as I’ve been tiling my shower. It has worked fine for small buckets of thinset, about 6-7lbs at a time. Because I’m slow & doing it myself the smaller loads work for me, though as others have said… I think if I were to do a whole bucket, it’d be too much for it.This seems to have a rheostat type switch for the speed control (1-10), and it starts off great but after a few minutes of running the unit starts bursting to 10 speed on its own, though I’m still at level 1 or 2.It’s cheap. But for me, a DIY guy using it to mix a few bags a quarter bucket or so at a time, it is working adequately… especially for the price tag.
Customer
2025-08-18 17:07:27
For the low price, I thought I’d give it a shot and try to avoid burning up another drill. Mixed up entire 50lb bag of floor leveling cement like it was just water based paint. Definitely will mix 5 gallon bucket of paint. Seems like it’ll easily mix mortar. I don’t do a lot with concrete with aggregate, so can’t speak to that. Mixer comes with 1 tool and it’s heavier duty than a paint mixer. You can purchase other tools, but manual poorly written and the translation was even done worse, so not sure which tools are for what, but tool that came with it will be able to handle what I use for it. Mixer doesn’t have a Chuck or rotor hammer type connection. Tools require an M14 thread, so mixing paddles I already had won’t work. If you’ve been using a drill for your mixing, get this to save your drill. Didn’t even run hot on me. Handles and control make it easier to use as well
Paul
2025-07-15 11:34:11
Used to mix thin set mortar at roughly 25 pounds per batch in a 5 gallon bucket. No problems at all. Easily enough power at mid rpm setting.
Mike Williamson
2025-07-08 13:16:52
My wife does ceramic’s and needed something with more robust to mix her 5 gallon buckets of slip. This is the ticket! Handles well has plenty of speed and strength. Truly amazing for the price
Steve
2025-04-23 16:51:09
The media could not be loaded.
Issa frampton
2025-04-15 21:25:39
Worked great while it worked but after 3-4 uses the motor has given out on me. Used only as instructed.
Mario
2025-03-30 13:17:39
It works as described and fairly easy to use. It’s a great value for the product. I use it every day for work and I’m a contractor.
David Peck
2025-03-21 13:51:11
I used this tool to mix and thin joint compound for a drywall project, and will use it again to mix mortar. Really useful tool.
Mario
2025-01-08 11:30:03
Buena potencia, realiza el batido y la incorporación del material muy bien, no deja grumos, ahorra mucho tiempo y esfuerzo
Erika b.
2024-12-30 19:36:36
hola buen dia mira hise la compra de esta mezcadora pero al llegar me di cuenta que las aspas son de metal y no acero inoxidable habra manera de que me puedas hacer las aspas de acero inoxidable por que las necesito para grado alimenticio o alguna opcion gracias y me podras emitir una factura de la compra ??
Recommended Products