Your cart is empty.
Your cart is empty.L D
2025-09-04 11:07:45
If you're on the fence, because these do not have the front steering link arm option, do not worry, you won't like the steering link anyway. I have the steel versions of these, with the steering link, and the tube style steering link is terrible. It twists and moves when driving, tweaking your steering constantly. I took it off pretty quickly after I realized it wasn't working well. Stay with the solid one-piece steering link, you'll be the most stable.These are heavier than my steel versions. They do add a nice brass look to the vehicle, I will say. The kit comes unassembled, so you'll have to put the link ends, and hollow balls together, to complete the install. There are, as always, some parts left over. Injora likes to give a few spares, in case of loss, of damage. I really like that about Injora products. You can almost count on there being enough, plus extra to cover the job, each time.The only difficulty comes when you are assembling these. The rods have an Injora logo printed on them, so depending on if you want it shown or not, you will have to adjust each rod, end to end, so the logo is placed properly. This effort makes it a bit time consuming to assemble and a little more difficult. Next time, I think I will just remove the logo with some thinner and not worry about it. I don't like to show logos (when possible) anyway, so this would be the only thing I would do different next time.I would 100% buy these again and would absolutely recommend them to others.
Justin
2025-09-02 12:08:44
They fit the trx4m very well and easy installation. No instructions but that being said, who doesn’t use YouTube or google. Plenty of videos of people explaining how to install
M. Shepard
2025-08-21 20:39:04
these go a long way to adding weight and style to your trx4-m they're strong, sturdy as heck and look great, and once you run the vehicle for a few minutes they move very well and provide all the articulation your axles, and shocks can give you
Dan
2025-08-04 12:59:47
Easy to put together and install, added an extra spacer to the rears for my Bronco, lined up nicely, works well with the Injora drive shafts, and 59mm shocks, added some good weight too.
Russ
2025-07-22 13:07:32
Good replacement for the plastic stock parts that adds some weight down low. The bend in the links won’t net you that much ground clearance because of the drive lines though. I took one star off because they do not come assembled and you will have to screw the heim joints on the links and pop the ball portion of the heim joint in as well.
JUAN CABAL
2025-07-16 20:37:06
Easy to assemble, you will have to install the plastic arm ends and brass ball joints. It comes with loads of hardware and extra spacers. I used them to adjust the pinion angles by installing them 2 at a time to the upper control arms. You can also just extend them by just unthreading them but the spacers just give it a more finished look. The arms provide more clearance in getting over an obstacle to help from getting stuck over center. These arms will not get you more flex, that comes from shock length and placement.
Lynn Earle
2025-07-11 12:44:55
Added noticeable amount of weight and looks great. Assembly was straightforward despite no instructions. Just study the stock links and all will be obvious. There were tiny spacers that I assumed were to lengthen links as desired, but they seemed to match stock length without them, so I kept these in my parts box. One test run so far and I think I can tell a difference in climbing.
Krista W.
2025-06-29 18:53:24
Great products and fast shipping! Highly recommend thank you Amazon!
Massimo Sciurpa
2025-06-25 13:53:29
Tutto ok il montaggio,belli da vedere e robusti rispetto agli originali in plastica
Christopher Tosetti
2025-06-11 14:10:36
Esthétiquement rien a dire, produit vraiment très bien fini avec le logo sur chaque bras, la qualité est vraiment au rendez vous. Je recommande vivement, petite option vraiment chouette pour un prix vraiment raisonnable ðŸ˜
Martin K.
2025-06-06 15:07:02
... wenn man denn weiß, wie. 😉Anbei ein Bild, wie ich die Links montiert habe.
shawn
2025-05-19 11:25:05
Good looking and a vast improvement over the factory plastic parts on the trx4m high trail.
Alex laberge
2025-05-15 19:36:39
Sa fit tres bien et wow je suis content
L D
2025-04-24 15:10:57
If you're on the fence, because these do not have the front steering link arm option, do not worry, you won't like the steering link anyway. I have the steel versions of these, with the steering link, and the tube style steering link is terrible. It twists and moves when driving, tweaking your steering constantly. I took it off pretty quickly after I realized it wasn't working well. Stay with the solid one-piece steering link, you'll be the most stable.These are heavier than my steel versions. They do add a nice brass look to the vehicle, I will say. The kit comes unassembled, so you'll have to put the link ends, and hollow balls together, to complete the install. There are, as always, some parts left over. Injora likes to give a few spares, in case of loss, of damage. I really like that about Injora products. You can almost count on there being enough, plus extra to cover the job, each time.The only difficulty comes when you are assembling these. The rods have an Injora logo printed on them, so depending on if you want it shown or not, you will have to adjust each rod, end to end, so the logo is placed properly. This effort makes it a bit time consuming to assemble and a little more difficult. Next time, I think I will just remove the logo with some thinner and not worry about it. I don't like to show logos (when possible) anyway, so this would be the only thing I would do different next time.I would 100% buy these again and would absolutely recommend them to others.
Justin
2025-04-18 17:39:18
They fit the trx4m very well and easy installation. No instructions but that being said, who doesn’t use YouTube or google. Plenty of videos of people explaining how to install
M. Shepard
2025-04-15 19:06:42
these go a long way to adding weight and style to your trx4-m they're strong, sturdy as heck and look great, and once you run the vehicle for a few minutes they move very well and provide all the articulation your axles, and shocks can give you
Dan
2025-04-09 10:25:08
Easy to put together and install, added an extra spacer to the rears for my Bronco, lined up nicely, works well with the Injora drive shafts, and 59mm shocks, added some good weight too.
Russ
2025-04-07 18:35:40
Good replacement for the plastic stock parts that adds some weight down low. The bend in the links won’t net you that much ground clearance because of the drive lines though. I took one star off because they do not come assembled and you will have to screw the heim joints on the links and pop the ball portion of the heim joint in as well.
JUAN CABAL
2025-04-01 17:56:02
Easy to assemble, you will have to install the plastic arm ends and brass ball joints. It comes with loads of hardware and extra spacers. I used them to adjust the pinion angles by installing them 2 at a time to the upper control arms. You can also just extend them by just unthreading them but the spacers just give it a more finished look. The arms provide more clearance in getting over an obstacle to help from getting stuck over center. These arms will not get you more flex, that comes from shock length and placement.
Lynn Earle
2025-03-18 13:48:49
Added noticeable amount of weight and looks great. Assembly was straightforward despite no instructions. Just study the stock links and all will be obvious. There were tiny spacers that I assumed were to lengthen links as desired, but they seemed to match stock length without them, so I kept these in my parts box. One test run so far and I think I can tell a difference in climbing.
Krista W.
2025-03-14 13:13:18
Great products and fast shipping! Highly recommend thank you Amazon!
Massimo Sciurpa
2025-03-08 18:44:23
Tutto ok il montaggio,belli da vedere e robusti rispetto agli originali in plastica
Christopher Tosetti
2025-02-18 18:25:55
Esthétiquement rien a dire, produit vraiment très bien fini avec le logo sur chaque bras, la qualité est vraiment au rendez vous. Je recommande vivement, petite option vraiment chouette pour un prix vraiment raisonnable ðŸ˜
Martin K.
2025-01-30 17:25:30
... wenn man denn weiß, wie. 😉Anbei ein Bild, wie ich die Links montiert habe.
shawn
2025-01-09 14:38:06
Good looking and a vast improvement over the factory plastic parts on the trx4m high trail.
Alex laberge
2024-12-23 19:17:24
Sa fit tres bien et wow je suis content
Recommended Products
$16.99
$ 8 .99 $8.99
$32.99
$ 16 .99 $16.99