Recently I bought a PC Tower and was looking for a X-Shaped Floor Stand with casters and came across this that caught my eyes. I wanted to keep this PC out of the way on the floor under the desk but needed something to keep it up and off the ground. This is the PERFECT solution! It came with the casters (wheels) and rubber pieces attached for grip.I love it when things are this simple, straight forward and effective at a great price! I have nothing but the highest recommendation for this X-Shaped Compact Floor Stand with Casters! And no, I didn't get it for free or at a discount. I paid full price. Hope this feedback helps everyone!!!

I purchased this primarily to lift my PC off the carpet. My intention was to reduce the amount of dust my PC would pick up off the ground. This was a simple and cost-effective solution. I have an ATX-mid case.The box includes the stand, five casters, four rubber bumpers for the side of the case, and four rubber bumpers for the underside of the PC. Installation was easy. No instructions were included, and none were required. The stand adjusts easily, and though it does not lock into place it stayed in place when rolled on the casters.The build quality is satisfactory for the price. The plastic is not particularly heavy, but it supports my PC well. I rolled my PC back into place after setting it on the stand and the casters rolled smoothly, especially considering it is one the carpet.I wouldn't purchase this for heavy useage, as I do not think it is constructed well enough for such use; however, for light home use it is a great solution.

My wife recently purchased a low profile desktop PC but didn't have the desk space for it. There wasn't much of a clearance between it and the floor when placing it vertically, and we have carpet, so I decided to find a stand for it.I knew we only wanted some clearance between the PC and the floor, so I didn't set my sights high when searching. As long as what I received fulfilled that most basic function, all would be fine. I ran across this, the most inexpensive stand in the store at the time, and pulled the trigger.The construction is solid enough for the purpose - it doesn't feel like it's going to have any issues supporting the weight of the PC. The four endpoints are padded with rubber and there are rubber pegs at four locations along the arms. This allowed me to get a snug fit and it doesn't feel like the PC is going anywhere; if it does, it's taking the stand with it.I didn't install the casters since we don't need to pull this PC in-and-out, but they seem to be a bit flimsy and the inserts for them aren't reinforced with much plastic. I'd recommend this product if you don't need to use the wheels, otherwise, I'd look elsewhere.UPDATE------------I bought another for my full size ATX case. While my wife's fit perfectly, mine hangs over by 2 to 3 inches at the front and back. I really should have checked the dimensions before reordering. It doesn't feel quite as stable, obviously (physics an' all), but it doesn't make it not worth the purchase. It accomplishes the goal of at least raising the tower off the carpet, even more so since I've installed the casters on mine.I have my machine setup so I rarely need to work with the back, but I wanted to install them for the purpose of this review. I'll make sure I pull the machine out at least a couple times a week and will update my review if I start to have issues. If you don't see any further updates, you can assume they're still working as advertised. I will say, though, that I noticed there are 5 casters, including one for the center. If someone left off the fifth caster, I'm positive the stress would be too much for the others to take. I wonder if this may have been what happened with some of the other reviewers.I also noticed some reviewers mentioning screws, and how they were left out - I haven't the foggiest what they're talking about. There are eight pieces of rubber included with the frame. Four of those are the large vertical pads that hug the sides of the computer. They're a tongue and groove design with a small extension that fits into a slot on the frame. They fit securely, even more so when there's a PC wedged between them. The other four pieces are plugs that fit into the bottom of the frame to provide some grip horizontally. Similarly, they aren't going anywhere once a PC's on top of them. The frame is already put together. I can't see any way screws would be used.UPDATE------------It's been a month since my review and I've been testing the casters on my carpet. I can see how they could be easily damaged if not being careful, but I think not allowing them to bear the brunt of the force when moving the stand would be sufficient to keep them in good condition. While I've been slightly rougher than I normally would have been considering I have a backup pair, I still haven't had an issue. I would just recommend gently lifting as you pull - especially if you have carpet.And, in-case you were wondering, I still stand by my rating. I've had no issues with the product and it's accomplished its job admirably. Is it a 5 star product? No, but I don't need a 5-star product for this; just like I'd be perfectly happy with a 4-star napkin after lunch.

I don't slide my computer around too much, but I did want it off the ground. I've had this since January 2017 and it's served me well. If this is something you want, this particular one does the job.Just an addition, one thing you can do is buy an IKEA shelf (just the shelf, they sell them separately) and put it on top, if you want your computer on a harder surface while still on wheels. I didn't need to do this but I like the look of a little platform.

This was exactly what I was looking for~! My HP Omen has an airflow filter on the bottom of the case that gets easily blocked by carpet. This PC desktop caddy allows me to lift up the PC by a couple of inches and improve airflow. With wheels attached to the caddy, I can easily roll my computer around which is very nice.The plastic material & build feel a bit cheap but it seems durable enough.Assembly was super simple and easy and the protective rubber pads ensure that my case won't get scratched up.Good stuff.

Product does what it is advertised to do. No complaints so far and only took a couple minutes to assemble each one - I was surprised how wide it can expand to... I bought 2 of them for my Rosewill Thor V2 case which is a bit over 9" wide to keep it off the carpet (my previous case stand was too small and a pain when trying to work on my PC). 2 of these hold my case up fine, it rolls well on carpet and is actually wide enough that I can remove the side panels of my case to work on it or just clean it. For $10 each I think it's a good value, glad I picked these up instead of some of the other more expensive ones I was looking into. Build quality is alright, it's plastic and only $10 so I knew what to expect, but it seems sturdy enough for what I need it for. All in all it's a good product and does what it is advertised to do.

Easy to assemble, sturdy and functions as expected.

الكيس حقي كبير مره ونزلته عالارض بذا الصدق رهيب يمديك توسع او تطول عشان يوصل للحجم المناسب والبي سي حقي ثقييل واموره طيبه والكفر فيه مانع عشان ما يتحرك ويثبته

Material plástico pero se siente sólido y resistente. Tiene antiderrapante en las esquinas. Para el equipo que lo compré era para uno del trabajo y le quedó grande ya que no ajusta el largo de los brazos. Pero para un equipo de tamaño estándar ajustaría perfecto. Las llantas no tienen freno pero no es algo que necesites si estará en un lugar que no estobre. Pero si es así, estarás moviéndolo sin querer muy frecuentemente. Esto es especialmente molesto al conecar o desconectar cables al frente. Pero si quieres acceder a los de atrás sin levantarte sería una ventaja más que una desventaja. Para lo primero basta con usar dos manos.

Perfect fit. Nice quality. Awesum product.

Awesome product. I wanted something to keep my NZXT 400 off the floor. Fits in well enough for me and it is very convenient especially when I'm changing cables around or cleaning. I have tiled floors so it's moves with ease. Not sure how it'd go on thick carpet though. For me it is solid value for the price.