Your cart is empty.
Your cart is empty.IVY Classic Chrome Alloy-Steel Spiral Screw Extractors are designed to remove broken screws, bolts and studs. These screw extractors are constructed out of Chrome Alloy-Steel for strength and longevity. They featured a tapered left hand spiral flute to grip the screw firmly. The polished body and sandblasted flute prevents rust. IVY Classic Industries is dedicated to producing a comprehensive, quality line of power tool accessories and hand tools.
kevin dunaway
September 3, 2025
Very happy with the product and works very well
UCrazyKid
August 25, 2025
As advertised. Good tools but have there limitations do to strength. They have to be hardened to “bite†into the screw but that also means they are brittle. I had one break already, but really not the fault of the tool. I needed to use heat and a bigger center hole.
LEONNICA
August 25, 2025
Exceeded my expectations
CH3V
August 23, 2025
this will work on 10-32x1/4" stainless steel set screw for gas block, i bought this and other extractor set and i wasnt sure if the other set would work but it did and i shove this in to see if it would of work and it will, so yeh good luck
Lee K. Sachs
August 22, 2025
3 stars, it lost 2 because:1. Star: it bent (after heating with a torch) the bit bent, but a stuck brake bleeder screw did not.2. Star: the square end appears 13/64 I dis not have a 13/64 square tool,socket? To attach and 2 different vice grips spun on the end before a stuck, heated, bleeder screw did.Remove a broken bleeder screw, project failed......
JJ
August 21, 2025
There are low quality options for these, but these seem to be higher quality for a reasonable price. Worked pulling headbolts on a gm 4.2l motor.
Alex
August 19, 2025
They worked on my engine cover bolts that had been so rusted and stripped down that I needed to replace so I could change my oil. Lost one star because the recommended drill bit sizes seem to be off.The instructions recommend a 1/4 bit for the #4 extractor but after drilling the extractor bit wouldn’t catch - the hole was too big. I had to make the hole slightly larger with another bit and move up to the #5 extractor bit / use an adjustable wrench to remove and it caught the edges perfectly and came out with ease.They really seem to work well but the drill bit sizing may confused people who haven’t worked with this sort of set before.
Cordell
August 11, 2025
Excellent quality! Works very well! I’ve extracted many stripped out bolt heads with these!
kevin dunaway
August 4, 2025
Very happy with the product and works very well
UCrazyKid
July 26, 2025
As advertised. Good tools but have there limitations do to strength. They have to be hardened to “bite†into the screw but that also means they are brittle. I had one break already, but really not the fault of the tool. I needed to use heat and a bigger center hole.
LEONNICA
July 9, 2025
Exceeded my expectations
CH3V
June 2, 2025
this will work on 10-32x1/4" stainless steel set screw for gas block, i bought this and other extractor set and i wasnt sure if the other set would work but it did and i shove this in to see if it would of work and it will, so yeh good luck
Lee K. Sachs
May 23, 2025
3 stars, it lost 2 because:1. Star: it bent (after heating with a torch) the bit bent, but a stuck brake bleeder screw did not.2. Star: the square end appears 13/64 I dis not have a 13/64 square tool,socket? To attach and 2 different vice grips spun on the end before a stuck, heated, bleeder screw did.Remove a broken bleeder screw, project failed......
JJ
May 17, 2025
There are low quality options for these, but these seem to be higher quality for a reasonable price. Worked pulling headbolts on a gm 4.2l motor.
Alex
May 14, 2025
They worked on my engine cover bolts that had been so rusted and stripped down that I needed to replace so I could change my oil. Lost one star because the recommended drill bit sizes seem to be off.The instructions recommend a 1/4 bit for the #4 extractor but after drilling the extractor bit wouldn’t catch - the hole was too big. I had to make the hole slightly larger with another bit and move up to the #5 extractor bit / use an adjustable wrench to remove and it caught the edges perfectly and came out with ease.They really seem to work well but the drill bit sizing may confused people who haven’t worked with this sort of set before.
Cordell
May 10, 2025
Excellent quality! Works very well! I’ve extracted many stripped out bolt heads with these!
sprinkler-wizard
April 29, 2025
It got the job done easily in just a few minutes. I use it on PVC pipe (1 inch). #8 is perfect for 1 inch pipe.
Martin Ryan
April 12, 2025
Works well
EREMER
April 10, 2025
Son muy practicos...facil de usar.. y la variedad de tamaños permite trabajar bien.. aun que los demas tamaños ya se venden plr separado
Jon
April 7, 2025
Did what I needed too you get what you order
J.Wen
March 11, 2025
Well, I tried to remove a stuck screw holding the license plate on my car. All the bit did was wear down the screw head. It didn't catch on and of course it didn't extract the screw. I had to remove the plate holder entirely and cut it into pieces to remove the license plate.
sprinkler-wizard
March 4, 2025
It got the job done easily in just a few minutes. I use it on PVC pipe (1 inch). #8 is perfect for 1 inch pipe.
Martin Ryan
February 28, 2025
Works well
EREMER
February 17, 2025
Son muy practicos...facil de usar.. y la variedad de tamaños permite trabajar bien.. aun que los demas tamaños ya se venden plr separado
Jon
January 17, 2025
Did what I needed too you get what you order
J.Wen
January 8, 2025
Well, I tried to remove a stuck screw holding the license plate on my car. All the bit did was wear down the screw head. It didn't catch on and of course it didn't extract the screw. I had to remove the plate holder entirely and cut it into pieces to remove the license plate.
Recommended Products
$32.36
$ 16 .99 $16.99
$30.43
$ 15 .99 $15.99