Your cart is empty.
Your cart is empty.Product Description
Tips: the passenger side bolt is hard to get at, so you could turn the steering wheel all the way to the right, and that gave you more access with long socket and breaker bar to the bolt head. REMEMBER to tighten these bolts with all four wheel on the ground and torque all replaced bolts to factory spec
Jake B
2025-08-31 12:05:01
A MUST HAVE for JK/U owners!! The original track bar bolts are threaded all the way down and leaves alot of play these reduce the play and still uses the same 21mm socket head. I was thrilled to find out that you can still use the original nut on the passenger side meaning you don't have to use a wrench to tighten! Pair these with a new trackbar and no more death wobble! Won't woot!
AAdkerson
2025-08-25 17:44:31
Good upgrade from factory bolts . Fit snug .took play out
Dirty Leg
2025-08-23 21:23:55
Fits, locks in and holds up.
Muzickman
2025-06-22 14:32:30
Did the trick on my 07 JK. I did not get all the washers in my kit! Not a big deal but these bolts are slightly larger and took out the slop movement with my track bar. My factory bar was trash and the factory bolts were fully threaded. I did not have any bracket damage from the factory bolts that was a plus. I did upgrade my track bar to adjustable and the factory bolts had to much play in the sleeve. This kit they fit snug with no movement when installed. Factory bolts had to much play in the track bar. Took a star away for not getting the washers.
Minato_XD
2025-01-20 12:23:20
Fast shipping , good quality
Recommended Products