Your cart is empty.
Your cart is empty.Product Description
Juegoal Rear Bumper Protector
Holds up to 300 lbs
High-strength resist corrosion
Simple installation - no drilling required
Rear bumper protection is molded out of TPEE in our manufacturing facility, and fits any vehicle with a standard 2" receiver hitch
Steps
1. Slide the 2" square portion of bumper protector into your 2" receiver with the grooved step surface facing upwards.
2. Align the bumper protector to the deepest hole position allowed by your receiver.
3. Insert the hitch pin (Included) to secure your hitch bumper to the receiver.
Specifications:
Dimensions: 10" x11.8" x 2.4"
Package: 1 x Vehicles Bumper Guard (include Pin Lock and Stabilizer)
Ivan C.
2025-08-26 12:24:19
Great product and fits perfectly. Quality is acceptable.
parick
2025-08-23 15:31:54
I have a full size van modified into a class B motorhome (camper van). It can be difficult to see the rear when backing, despite the camera. But more importantly, other drivers tend to back into long vehicles in parking lots. This protector adds just enough protection against someone backing I to my vehicle. It looks good and is as sturdy as the big name brands. I can also stand on it to reach my backup camera to clean it or to reach the top of the rear doorway. It does have a little side-to-side give, but not enough to make me fall. And I am 70. I am under 200 pounds, so perhaps it would rock more for a large person.
SD
2025-07-18 13:33:35
Bought this for a Defender 90 with full rear factory tire mounted on the vehicle. While it fits, it does not work as a step for this vehicle even on full extension it is too short. Outside of that, the advertisement shows the bumper with locking pin. In small print, it says it does not come with the locking pin. Wish the manufacturer would just remove this from the photo. Its misleading. The product itself is nice and solid. It could be slightly fatter for the 2" insert, because if you try to use this anywhere past the third hole (see pic two) it will giggle all around. This is truly designed to be used only on holes one and two...if you push it hole three. For sure not hole four or five. For the price, I am happy, while I can't use it for its intended purpose of a step for this vehicle, I can use it to keep people from bumping into the rear bumper of my vehicle. Four stars as it could have been made slightly fatter to make it more snug in the 2" receiver.
Jose Moctezuma
2025-05-27 18:50:11
This product is versatile, it protects from other vehicles and provides a step to get in the bed.I recommend this for distracted drivers in the traffic.
Blake Acord
2025-05-09 19:58:42
Fits perfect to a standard hitch...
Mk
2025-05-06 14:48:45
It worked great for the back of my van for about 2 months then one day I stepped on it and it completely snapped off. I’m 6ft 205lbs so I assume 200ish pounds is the weight limit.
bryan24kaos
2025-04-17 13:45:21
Tesla Y don't have any bumpers at all, parking on street is dangerous and all the car need to do is notch it and it'll dent your tailgate door which is super comment on Y. This lightweight and easy to setup (only if you have Tow Hitch) setup on the back, bought that from Tesla from factory for $1000 but worth the investment as we do outdoor activities. Highly recommend this for anyone that had tow hitch.
Stude
2025-04-10 17:40:58
I purchased this step to replace another that I wasn’t happy with. Construction is all plastic, I’m sure it has a technical name but in layman’s terms, it’s plastic. The fact that it is made out of plastic you don’t have to worry about rattles. It comes with a hitch pin. Some people might consider purchasing a lock but I’m not, the cost of the step doesn’t warrant it. Being it’s made out of plastic it flexes somewhat when you put all your weight to either side of the centerline of the step. I’m a big guy, 250 plus, so the flex may not be an issue for a lighter person. Just try to step on the centerline of the step. I put a strip of red reflective tape across the back to increase visibility.
Mike R
2025-01-26 18:33:17
Solid construction and will not rust being heavy-duty plastic. Similar to the WTech version but at a more reasonable cost. Use a locking hitch pin to prevent theft. I've been rear-ended at low speeds by texters in stop-and-go traffic and this will prevent any damage next time. Also great for accessing my roof rack storage system instead of slipping off the rear bumper. Supports my weight without any bending but is still always best to stand in the center, not the ends.
cliyone
2025-01-09 14:04:29
リアラダーã®ä¸‹ç«¯ãŒé«˜ç›®ã§ç™»ã‚Šã«ãã„ã®ã§ã€ã“れをè¸ã¿å°ã«ã™ã‚‹ä½¿ç”¨ç›®çš„ã§è³¼å…¥ã—ã¾ã—ãŸã€‚ã™ã”ãリアラダーを登りやã™ããªã‚Šã€è²·ã£ã¦è‰¯ã‹ã£ãŸã¨æ€ã£ã¦ã„ã¾ã™ã€‚難点ã¯ã€2インãƒã®ãƒ¬ã‚·ãƒ¼ãƒãƒ¼ãƒˆãƒ¬ãƒ¼ãƒ©ãƒ¼ãƒ’ッãƒã«åµŒã‚ã‚‹ã¨ã€ç·©ãã¦ã‚¬ã‚¿ã‚¬ã‚¿ã—ã¾ã™ã€‚家具ãªã©ã®ã‚¬ã‚¿ã¤ãæ¢ã‚ã®æ¥”ã§ã‚¬ã‚¿ã¤ãを補æ£ã™ã‚‹å‡¦ç½®ãŒå¿…é ˆã§ã™ã€‚ガタã¤ã対ç–ã—ãªã„ã¨ã€ã‚¹ãƒ†ãƒƒãƒ—ã¨ã—ã¦ä½“é‡ã‚’ã‹ã‘ã‚‹ã®ã¯ä¸å®‰ãªãらã„グラã¤ãã¾ã™ã€‚ãã‚ŒãŒãªã‘ã‚Œã°ä¸¸ï¼•ã¤ã§ã™ã。
Raja
2024-12-31 18:52:57
Very good quality
Recommended Products
$61.95
$ 27 .99 $27.99