Your cart is empty.
Your cart is empty.
Features:
You can present the leather craft stamping tools as gifts to your friends and partners who like stamps, delivering your care and receiving their appreciations.
The leathercraft supplies are exquisitely made, realizing the practical function as well as the aesthetic function.
Specifications:
Material: mainly acrylic
Color: mainly transparent
Size:
Length: about 5.91 inches/ 15 cm
Width: about 2.05 inches/ 5.2 cm
Thickness: about 0.08 inches/ 2 mm
Package includes:
1 x Leather stamp guide
Notes:
Manual measurement, please allow slight errors on size.
The color may exist a slight difference due to different screen displays.
Acrylic material is fragile, please do not vigorously use our products in case of breakage.
Darrol Williamson
August 27, 2025
The pieces have to be assembled, they do not fit snug so will not hold in place, but placing a flat washer between two opposite corners will fix that, thought the numbers were printed backwards but there is a protective coating which needs to be removed and then it's clear instead of white.
Kevin
August 26, 2025
This is cheap junk. The measurements were printed backward. You have to put it together and that’s not as easy as it looks. It’s flimsy and not tight. Mine was even stained red in one spot. I will return.
jason
July 25, 2025
this works okay but I wishthe rulermore snug and stayed in place
sharkfin
July 20, 2025
But does work well with small letter and stamps
LizzieJune
July 17, 2025
The numbers are backwards. Received three female screws and five male screws so I cannot assemble it
C Steele
June 15, 2025
When using it, is difficult to keep it in the position you set it up in. Very flimsy
P. S. Rockwell
April 1, 2025
First off, this can be used on stamps up to 3/4", so if you need larger, look elsewhere. Second, the way it is constructed with the screws the manufacturer used, it can not be tightened at all, so it is always loose. Third, the measurements used are Metric and not Imperial, so you get centimeters and no inches. Finally, as others have noted above, the plastic is semi-opaque and the ink is printed backwards so it is very difficult to read unless it is at just the right angle and just the right light. It isn't worth it just to save a few bucks.
Ironrebel
November 13, 2024
Very loose. Cheaply made had to put together isn't hard to do but the screw and nut dues fit correctly easly moves
Recommended Products
$34.95
$ 14 .99 $14.99