Your cart is empty.
Your cart is empty.Product Description
S4 speaker stands are the perfect addition to your desktop speaker setup. With 16° of upward tilt, they ensure you experience the full range of frequencies your speakers have to offer. Each stand features foam padding to reduce vibration when you have the sound cranked up, and includes a mounting hole and 1/4”-20 screw to secure your YU4 or other compatible speakers in place.
Get the most out of your speakers by tilting them 16° toward your ears, ensuring you never miss out on those higher frequencies
Improve stability by securing YU4 or other compatible speakers in place with the provided 1/4”-20 screw
Using as little material as necessary, S4’s low-profile design keeps your desktop looking clean
S4 stands measure 5.5'' wide by 7.9'' deep and are capable of holding 8 lb each
Anon9998
2025-08-16 15:15:25
I own (2) pairs of these for my (2) desk setups. They are fantastic. They are very heavy and sturdy and do not move even when I accidentally pull the cord with my foot.They also do not move when moving my pc stand setup that is on wheels for easy maintenance. If I spin the pc stand around and accidentally pull too hard on the speaker wire it doesn't normally yank the speakers off the desk.I have my sit/stand desks about 20 inches from the wall mounted monitors. There is plenty of space for the speakers to be yanked off into that big opening but it never does. It never does because the stand is made of exotic super metal from space formed in the heart of a dying star and can only be lifted by the worthy (joking but it seems that way).They are not cheap but you get what you pay for. If you want some stands that are:-incredibly durable and sturdy-give you that upward cant, to align the voice coils of the tweeter and mid woofer so sounds of the full audio spectrum reach your ear at the same time (time correction), and reduce sounds bouncing off the desk causing smearing and excessive bass at only a few frequencies overwhelming the fidelityThese are what you need. If you have expensive speakers that have active circuitry in them that time align the tweeter and woofer then I have no idea if canting upwards would make your speakers sound worse or not. Either way, these speaker stands are great!
Iggy
2025-08-06 13:55:11
Purchased a new 5.1 sound bar. Only place for the wireless rear speakers was high on top of a bookshelf behind my couch. These stands were the perfect solution. As you can see from my pictures, I reversed the stand and positioned the speakers facing down at a 16 degree angle. The stands themselves are super heavy and are solid!I Was afraid the speakers would fall off but the stands themselves come with a non-slip cushion both under the base of the stand and on the stand themselves. The speakers are solidly in place and do not move. I have no issue with placing them downward.Stands come with screws to secure them further onto the stand … sadly my rear speakers and their power cable are directly underneath the base so I can’t use the screws but even with the wire resting flatly on the base of the stand they are still super secure.Great purchase! You won’t go wrong with these!
soloz2
2025-07-05 16:22:38
Got these to angle and support a pair of Project Speakerbox 5's and they work well. I was unsure if I'd have to go up a size as these speakers are heavier than Kanto recommends, but these work well and no issues here. I have been happy with Kanto's desktop stands for some time now as I also have a pair of 6" tall stands supporting a pair of Kef Q150's on my desk. Highly recommended.
Glenn
2025-06-30 17:59:48
Surprisingly heavy, and exceptional quality and finish.They fit my Klipsch Promedia II speakers very well, and the sound is vastly improved.There are less expensive alternatives but I believe that these are well worth the price.
ryan
2025-06-26 17:27:34
They are good for my needs, sturdy and look nice. They are definitely a little expensive, but that’s fine.My only real complaint is that I wish the width of the padded portion spanned the width of the base. Both of my monitors are a lot wider. The S6 variant is far too big so that doesn’t work either. This will have to do.
A. M. K.
2025-06-03 15:40:16
I added Edifier powered speakers to our family room tv to improve sound quality. The additional tilt and lift of the these speaker stands improves the overall clarity and dispersion of the tv output. I also have the same speakers and speaker stands for my desktop office computer. The speaker stands do improve the quality of the music. I definitely recommend the Kanto Desktop Speaker Stands.
Karl
2025-05-06 13:33:01
I have Mackie CR4-X monitors perched up on them and I have no complaints. Monitors are fully supported and don’t slide around.
Darin F. Karnes
2025-04-13 15:29:17
Very solid and great angle. I use these in my recording studio to decouple my “grot boxes†from my console. The clarity it afforded me has made my grits extremely clear and accurate. It was a lot more than I wanted or expected BUT my mixes have been consistently cleaner and fuller. For less than $40 you really can’t lose.The rubber footings and speaker pad area really help with decoupling and stability. Nothing slips around at all!
SeriousSeb
2025-04-08 12:36:34
Habe die Kanto S4 für meine Edifier R1280dbs besorgt, die ich als Desktoplautsprecher am PC einsetze.Die Ständer passen perfekt für diese Lautsprecher. Sie machen einen wertigen Eindruck und sind verhältnismäßig schwer. Durch die Beschichtung sitzen die Lautsprecher stabil auf den Ständern, sodass man keine Sorge haben muss, dass die Lautsprecher umfallen könnten.Da die Edifier kein Schraubloch an der Unterseite haben, sind sie nicht mit den beigelegten Schrauben fixiert.Die Ständer werten die Lautsprecher optisch weiter auf und richten sie besser durch den Winkel auf meine Hörposition aus.Ich bin zufrieden und kann die Kanto S4 für Lautsprecher in der Größe sehr empfehlen.
Denis E
2025-03-14 15:24:37
Fits my studio speakers and the foam padding were nice touch for maintaining sound quality. Looking for minimalistic look and it functions the way it's intended. There were no vibration from my wooden speaker and it's angled enough for me to hear clearly.
jana
2025-03-02 21:13:19
Bon support d'enceintes pour une optimisation du son
bam
2025-02-26 18:12:58
Delivery was pretty fast, and it is weightier than expected, but it's good cause it feels solid and won't be budged around easily. But with the unchangeable 16 degrees of upward tilt, you'd have to have enough table space or use extra props to make sure it is directed to one's ears. So if you're really tall, don't have enough table space, maybe some other stand with adjustable height may be better for you. Anyways, as it is, it's better than just having my speakers sit flat on the table.I like the matt finish on it with the sponge support below it and on the base for the speakers. Overall, I think it's a pretty good and solid product, and it looks pretty nice. Price is maybe a tad bit high, ah well.
Arithmetic
2025-02-12 17:03:57
Kanto audio YU4ã¨åŒæ™‚ã«ãƒ–ラックを購入ã—ã¾ã—ãŸã€‚スタンドã ã‘å…ˆã«å±Šã„ãŸã®ã§æ—©é€Ÿé–‹å°ã€‚ãšã£ã—ã‚Šã¨ã—ã¦ã„ã¦é‡‘属ã®è³ªé‡ã‚’æ„Ÿã˜ã¾ã™ã€‚表é¢ã¯æŒ‡ç´‹è·¡ã‚„埃ãŒç›®ç«‹ãŸãªã„ザラザラã¨ã—ãŸæ‰‹è§¦ã‚Šã§ã€æŽ§ãˆã‚ã«å½«ã‚‰ã‚ŒãŸKantoã®åˆ»å°ãŒãŠã—ゃれã§ã™ã€‚デスクè¨ç½®é¢ã¨ã‚¹ãƒ”ーカーå–り付ã‘é¢ã«ã¯ç¡¬ã‚ã®ã‚¹ãƒãƒ³ã‚¸ãŒè²¼ã£ã¦ã‚ã‚‹ã®ã§æœºã‚„スピーカーを傷や共振防æ¢ã€æ»‘ã‚Šæ¢ã‚ã®å¯¾ç–ã‚‚ã•ã‚Œã¦ã„ã¾ã™ã€‚よã見るã¨MADE IN CHINAã®ã‚·ãƒ¼ãƒ«ãŒâ€¦ã€‚ãã£ã¨å‰¥ãŒã—ã¦ãŠãã¾ã—ãŸã€‚　スピーカー固定用ã®ãƒã‚¸ãŒ1本ãšã¤ã¨ã€ç· ã‚付ã‘用ã®å…角レンãƒãŒä»˜å±žã€‚対応スピーカーサイズã¯æ¨ªå¹…13cm~18cmã€å¥¥è¡Œ20~25cmã¨è¨˜è¼‰ã•ã‚Œã¦ã„ã¾ã™ã€‚外箱ã«ç›´æŽ¥ã‚¬ãƒ テープやé€ã‚ŠçŠ¶ã‚’貼り付ã‘ãŸçŠ¶æ…‹ã§å±Šã„ãŸã®ã§ã€ãƒ—レゼント用ã«è³¼å…¥ã•ã‚Œã‚‹æ–¹ã‚„箱もä¿ç®¡ã•ã‚Œã‚‹æ–¹ã¯è³¼å…¥æ™‚ã«æ¢±åŒ…希望ã¨ä¼ãˆã‚‹ã®ãŒè‰¯ã„ã‹ã¨æ€ã„ã¾ã™ã€‚
Recommended Products