Your cart is empty.
Your cart is empty.Product Description
Polystyrene foam material, smooth surface design, for DIY, graffiti, painting.
You can cut them according to your need.
Single sided adhesive on the back, peel off the protective film to use.
Klarissa
2025-05-08 13:45:19
Not great material. All 4 corners dented, surface dents on every sheet, 4 sheets didnt have full coverage adhesive as shown in photos, 1 sheet can completelybrokenand crumbled. Not the correct size, order 40x30. Received sheets were only 29.5 X 38. I have a 30x 40 portrait that i know have to scrap and reorder. Definitely not suitable for portrait mounting.
Cole B.
2025-04-26 10:34:27
This is foam core with a pressure sensitive adhesive on one side. I used this for mounting large photos in frames that do not have front glass. They came shipped pretty well, there was minimal damage on the corners of the top and bottom of the stack, but it was not enough to justify a return. Also, when mounting the photos, make sure you do not dent the foam or get any bubbles under the photo, because it will show on the photo when viewed at an angle. Easy to cut with a razor blade and a straight edge.
rich m.
2025-03-29 21:45:03
I bought these in a pinch to mount some photos. Although they work, the material is very fragile and has a bow to it. I ended up needing to stick reinforcement to the rear to help make them flat.
Coastal Quilter
2025-03-08 21:08:15
I think I was being generous by giving these four stars because it's not really foam core you would use for anything other than crafty type things. They arrived with a few dents and they dents easily. I was going to use them to put photographic images on them, but they have to be perfect with no imperfections at all because it will show any dent or divot.
content factory
2025-03-01 17:04:21
Arrived curved, with dents on each side. The material itself is very soft, unlike normal foam board. Absolute garbage.
Guardian
2025-02-11 16:20:27
These are great I make puzzles and put them on these boards and cut them out
Tim
2025-01-23 15:16:45
Even with a new blade, this chunked the edges when cut. It also bent just carrying a single sheet over to the place that I wanted to use it.
N. Himmes
2025-01-08 14:34:59
It's very bendable and is not suitable for high heat, dry mounting. Dents very easily. Regular paper bubbles on the sticky side. Not suitable for professional presentations. Ok for kids crafts.
Recommended Products