Your cart is empty.
Your cart is empty.This Standard Tower Conversion kit is the perfect solution for those who are converting a compact refrigerator or converting a freezer into a kegerator. This kit comes with brand new, high quality draft beer components and contains everything you will need to successfully convert your compact refrigerator/freezer into a kegerator at great savings. Note: Beverage Factory is the only Authorized Reseller of Kegco Kegerator Kits (Other sellers are selling inferior kits that are not Warrantied or Quality Assured Kegco Quality.
Matthew Bublitz
2025-09-04 18:20:19
Recently I got a Kegerator and I refurbished it. I took all of the inner piping out, along with the tank. Using this kit it was very easy to replace everything. All of the parts I needed came included with step by step instructions on what to do. The only issue I had when installing were that the new pillar was not the same size as the one that was already on it. This required me to drill 3 new holes, but once that was done it was easy. The hardest part was finding somewhere that would fill the CO2 tank.
Raven Autumn
2025-08-02 12:59:02
The most difficult part of building the kegerator for my husband was finding where to get the CO2. We live in a rural area and I really had to hunt to find someplace to fill my beautiful bright red CO2 tank (hint: I found a fire extinguisher place in a town about 60 miles away that fills the tank for us.) Ultimately we did purchase an additional generic CO2 tank so we can always have a backup (but the CO2 tank actually lasts through MANY kegs.) The only issue we have had was the connector to the gauge that reports the tank pressure was faulty and I was unable to get the hose off to repair that. Ultimately we purchased a new regulator (from Kegco) which seems to be a little higher quality and we have not had any issues since.The kegerator was a surprise birthday present for my husband. I was able to convert a Danby mini-fridge. Great DIY project. Great gift! We love our kegerator!
Harrison
2025-07-12 15:42:52
I'd never set up a kegerator before and didn't want to risk making a mistake and buying a bunch of materials individually. This was a little more expensive than parting things out, but the kit was well-made and the instructions were simple to follow. I did end up going to my local fermentation supply store, as the kit does not come with a keg, and they helped me get a different keg fitting. Note that if you want to dispense commercially-kegged beer, this kit is great, but if you want to keg your own and dispense from Corny kegs, you'll need a different keg connector.
Jason
2025-07-07 16:07:37
Just broke mine in last night. Took a few minutes to get the psi right, but worked great. Didnt come with install instructions, but was easy to figure out.
engrstudent1984
2025-06-24 13:36:09
I ordered this item to convert a used mini fridge into a man cave focal point. It was just what the doctor ordered. Each item came indivually packed in a larger box with no damage noted from the shipping process which was pretty quick. All items are well constructed and I suspect the tower/tap will function for years to come. You cannot go wrong with this item.Some thoughts for those wanting to do a conversion:1. When considering a one tap tower vs. a two tap tower remember that keg beer is unpasteurized and lasts only 1-1.5 months. The smallest standard keg (1/6 barrel) holds something like 5.3 gallons. So unless you have a lot of beer drinkers all the time a two tap tower might be an unnecessary added cost.2. I wouldn't recommend buying a new mini-fridge as you run the risk of destroying it if you drill the beer line hole in the wrong location. It took only a few days of looking around online (Craigslist) to find a used one for $60 that would fit the bill (look for one without a freezer).3. There are PLENTY of videos online which show the conversion process and how NOT to damage your fridge, so once you have this kit it takes no longer than 30 minutes start to finish.4. CO2 can be obtained from a gas supply store for much cheaper than a beverage supply store. Here in SC I can get a food grade CO2 fill up for $15 at Airgas National Welders.I hope this info helps and you enjoy your kit as much as I do. Happy Drinking!
TimPro
2025-05-23 16:06:10
Installation was easy and the quality is amazing. Very heavy top-quality hardware and connections.A few tips:1. Most CO2 refill companies will require you exchange your tank for theirs - be prepared to give up the nice aluminum tank. Check your local fire extinguisher refill companies in the yellow pages and DO NOT use paintball refill retail outlets (some add lubricating oil to their CO2).2. If running the tower mounted on a bar outside of the refrigerator, you will need to keep the beer line temperature at a cool 38 degrees. Do this by running the line through 2" PVC and using a 12 CPM pole fan (and 1" tube) inside the fridge to circulate the cool air through the pipe and tower. I used a 2.5" hole saw to accommodate the piping. Failure to do so will result in lukewarm foamy beer.Enjoy!
B. Dominic
2025-04-25 17:27:41
This system is impeccable, exactly what the doctor ordered. Installation took about 30-45 minutes after verifying that the fridge contained no lines running through the top. I used a 1.5" hole saw to drill through the top. The rest was a cinch.There was just one thing that needs improvement and that is the stability of the tower. The screws are too short. I would recommend getting longer screws (long enough to go through the top of the fridge) and anchor each with a nut and washer. Drill a pilot hole first though!Pro-tip: Get your CO2 tank filled at a local Fire Protection company (eg. Cintas Fire Protection). They filled mine up for $15. I've gone through 2 kegs now and no sign of slowing on CO2 pressure.
Sonny Cambridge
2025-04-02 15:08:16
I bought this kit to convert an old dorm fridge into my garage kegerator and I'm amazed at how well it compliments my man cave. It was super simple and easy to install. The delivery of the package was so fast I barely had time to pick a good keg! The regulator and the tap are quality made, the tower installation was simple and easy. My beer is super carbonated now, so much better and cheaper than going to the bar!
Vanblitz
2025-03-06 14:42:47
Amazing to put together and love it !
Joe Faught
2025-03-05 12:10:19
easy to install. works good
matvei
2025-02-28 10:40:59
Good product
Vincent Beaudoin
2025-02-04 13:07:46
perfect for my project
TG
2025-02-03 10:50:27
Perfect to build a kegorator. Great quality, and wouldn't hesitate to buy again.
Recommended Products
$1,509.00
$ 99 .00 $99.00