Your cart is empty.
Your cart is empty.Product Description
Installation Adjustable
The adjustable range of the mounting hole is 30~115mm.
Adjustable Angle
The motorcycle license plate fixing plate can be folded inward and adjusted to an appropriate inclination angle.
Stretch Adjustable
The extendable length is 21mm (0.86inch), which can help the tail light, exhaust to keep distance with license plate holder.
Height Adjustable
The vertical moveable range is 0~38mm (1.48inch). Perfectly adapted to the height of the rear of different motorcycles.
Nate S.
2025-08-09 10:40:50
I have yet to ride with this on my bike but I have installed it and it fits great. once you get it it is quite loose and you will need to tighten all the allen screws. Once you do that it should be super sturdy. I may remove the bolts and add loctite for piece of mind but other than that this fits and looks great. it was bolt on for an 07 FZ6 fit great.
Why did I buy this?
2025-08-06 13:50:50
Sturdier. Value for money. Easy install. Functionality.
Joseph Denk
2025-07-14 17:40:52
I bought this for my bike and it wasn’t a EZ install to get it to fit on the 300ss. Had to temporarily remove it just to get the wiring harness back inside the storage area due to it coving the wire hole. All in all it was an ease of installation, shockingly it very sturdy and definitely looks really good on my bike. And for the price wow just amazing.Only downside I really had was the wires for the license plate light suck and definitely have to go and re do it before I go out night riding.
Samuel Eder
2025-06-13 17:23:15
Description says it won't work on the Africa twin, but I was able to install it on a 2019 with no modifications. Very adjustable and the LED light is very bright. The wires seemed a bit thin but as long as it continues to work it is a great deal for the money. The blue annodization was actually pretty impressive.
Jdhd
2025-05-17 14:28:02
Product arrived quickly and is well made. It would not fit on my crf 300l. Had to modify the mounting plate and the adjustment points. After modifications were done, it fit perfectly and looks great
Cleatus
2025-05-15 14:28:19
I bought this to replace the broken plate holder on a zx6 with a Yoshi under-seat exhaust. I tried many different configurations and eventually just had to mount it on the swing arm since it didn’t have the versatility in being able to adjust it to fit under the seat and have enough clearance allowing for suspension travel. The wires for plate light were very light gauge and not much thicker than your average headphone wires.Updating my review because the seller will bug the hell outta you if you leave an honest review that might be useful since their listing doesn’t have much information.
earl staggs
2025-04-10 16:15:02
I only rated the FINISHED product five stars. To install on my CF Moto 650 NK I had to cut the corners off the piece that mounts the bracket to the bike. Then I filed the corners smooth and shot a bit of spray paint on it. Even after this modification, which I done only to get the bracket to fit into the recess on the bikes body, I had to drill out new mounting holes for the bolts to actually attach the bracket.Now that the bracket is on the bike you'd think you're good to go but you'd be wrong because the final section doesn't tighten down completely, and I read of this condition on this or another bracket, but I ordered this one anyway. You have to take the bolts out and install a washer OR you might be able to drill out the holes the bolts GO THROUGH, which are threaded but they shouldn't be because there are nuts on the backside, which tighten the bolt.The wires for the license plate light are like hairs, after carefully stripping I soldered them THEN attached them to the bikes wiring with crimp fittings.THIS IS NOT A DIRECT OEM FIT. But, at this price if you have the tools and are at all mechanically inclined you will be happy with the end result and you can rate your install five stars, because by the time you're done you'll deserve it.
DbblOh7
2025-03-19 10:22:32
This fender eliminator was perfect for me. I have an odd Italian bike that there is not much for unless you want to wait a long time. I couldn’t find anything that looked like it would work. I bought this mainly on price, and knew that I could return it if it wasn’t going to work.I was pleasantly surprised with this unit. It’s well made for the price; I wasn’t really expecting much. It was mostly assembled, but loose. I installed the LED plate light, and proceeded to fit it to my bike. The spacing on the mount was perfect for two of the holes left from fender removal. It went on using the factory screws that held on the fender. The adjustment is good to get the angle right, and it fit well. My only suggestion would be to tighten the screws, then back one out at a time, and use some blue thread locker before final assembly. Do not crank down on the screws, the unit is just aluminum, and the screws are stainless.All in all, I think this is a good value for the price. It’s fairly inexpensive, and looks good too.
Yevhen Dymchenko
2025-03-17 16:11:53
Easy installed, no cut cables , only one hole drilled. Indicators and plate light used original ones. perfect thing for KTM duke 390 2022.
A
2025-02-11 16:16:05
Very well built , comes with LED tag light . Can be adjusted . Was very happy with purchase. Fit my 2012 Honda cb1000r perfect .
888
2025-01-24 18:53:48
ما يركب على دبابات ريس سوزوكي بالتØديد gsxr600 رغم انه مذكور بالاعلان ان يتواÙÙ‚ معها
Omerta
2025-01-07 10:32:33
Quality is bad
Mg
2024-12-13 16:58:04
Easy to instal fits my mt03 , great quality
Recommended Products
$32.99
$ 15 .99 $15.99