M. Burke
2025-08-24 16:55:36
I have a few Keter plastic storage and workbench items and they are all made well, this included. This is in a sizable box, but it's not too heavy. The heaviest thing is the top, which is in a separate sub-box inside and pretty well protected. Some folks have mentioned damage to the top in shipping but mine was fine. Assembly was very easy and the instructions were clear. It took about 20 minutes to assemble. I do find the doors are a little stiff to open but not overly so - I may sand down the edges that catch to help a bit.I use this for my small Blackstone Traveler 2-burner (22"). It's almost perfect for it - it sits on top and the plastic construction is well protected by the metal tabletop. There is a significant gap between the top and the shelf. I've had it on high for 30 minutes and there's no sign of heat issues on the plastic. I cut a small hole in the side where I can run the propane line into the bottom cabinet where I store the propane tank (fits perfectly). It works really well. The storage area below could use a shelf, so I may make something for the half not consumed by the tank to make it more useful. The top allows plenty of prep space and the open shelf right below the top is also a great space for cooking needs. And I love the spice shelf at the end. My only gripe specific to my use case is it does put the griddle top a little high - It would be perfect if it was 4" shorter, but that's not a fault of the product.As for rust, I've had this for about 3 months now, stored outside on an uncovered deck (exposed), but I do keep it covered with a Blackstone cover. So far, I've had zero rust (this is not 304 stainless, so it can rust). I'll keep an eye on it, but even with normal environment/cooking buildup, it cleans up perfectly with stainless steel wipes.I was going to try to build a cart for my Blackstone since the Traveller stand is limited on prep space - I'm glad I purchased this instead as it's much more versatile and lighter weight than constructing something out of wood. Highly recommended!
Steel Breeze
2025-08-20 14:53:46
Came in a package that was easy to move around and pull apart. Individual sub-components nicely isolated. Felt like openning-up a high-quality lego set for assembly and the parts nicely "click" one to another with a similar quality. The short pictorial manual allowed complete installation in less than an hour. Components seem quite robut and the metal top is nicer than expected. While it seems like it will withstand the Florida weather nicely with the material, I've also purchased the cover which goes on an off easily. Roomy for BBQ accessory storage and lots of space for prep. If I have one recommendation for the manufacture is to create a little groove in the two plastic hooks to allow a full rotation of the allen key (supplied) during the installation of the hooks. Without those grooves you must do half turns instead of full turns which extends the 10 second action to a couple of minutes. Definetly not a show stopped and the only issue found during installation.
Ken Hitzeman
2025-07-29 18:14:08
I purchased this to remain outdoors in the elements, and I wanted a sturdy stainless surface for food preparations. The assembly was very simple and the instructions were straightforward to follow. The plastic pieces fit together well and the structure was sturdy once all components were in place. The biggest selling point was the stainless top which has additional ribbing to support the span between supports. The base is plastic which is why this is perfect for outdoor usage. It looks as good as plastic can look. I have at all times 3-4 bags of charcoal, small grill grate parts, gloves and charcoal starter. The doors shut and stay shut. I use this for meat prep and abuse it like a workbench. Great value and I will buy other sizes for similar uses around my grills. The hooks are also made thick and strong and hold a variety of grill tools. Paper towel holder is a nice extra perk. Try to find another comparable for the money...you won't.
Skipjack2001
2025-07-25 14:30:11
Bought this to sit next to my grill when cooking out. It adds a lot of space to set things while cooking.Came poorly packaged with a lot of broken styrofoam and pieces flopping around. But everything was in good shape.Assembly can be a little tricky. You can put the cabinet doors on either side, so make sure you know which side you want them when you put it together. I actually assumed both sides had cabinet doors when I was putting it together and realized I had mine on the wrong side. They’re difficult to get out once they’re installed so keep track of what side you’re working on.The body is well built and sturdy. The stainless top looks really nice but is quite thin and will probably dent easily. Not sure how well it holds up in the elements. I store mine in the garage when not in use.
Deborah
2025-07-17 17:53:04
The Keter Unity XL Portable Outdoor Table and Storage Cabinet arrived a day early and in good condition. It was easy to assemble - but make sure you study the pictures to ensure you get all the parts in the correct orientation. All the pieces are clearly marked (although you may have to hunt for the markings on some of the smaller pieces). Everything snapped together pretty easy with moderate effort and aligned perfectly. No missing parts. There is a very small dent on the edge of the stainless steel top. It looks to be in a similar place that other reviews have shown. Based on the packaging, it does not look to have happened in shipping. Ours is not visible from the top of the cabinet. The doors are a bit tough to open, but do work well. I would rather they be on the tight side. The finished product looks nice and will work great for our needs (grill table/storage). We live in a high desert climate, with temps in the 90s-100 during the summer months, and I will update the review if there are any issues because of the heat. We did get a cover, and because this is on wheels and moves easily, it will be easy to keep it out of the direct sun for most of the day. Very nice product for the cost.
THOMAS
2025-04-27 12:39:52
This was easy to put together on my own.Took my time & did it in less than an hour.The instructions could be better but it's not difficult to work out.We're using it to keep the cushions & table cloth dry.
FMC
2025-04-12 11:34:43
Wanted something for our deck that was waterproof and sturdy and looked good. I needed something to put in plates, sauces, mats, candles, throws etc etc. Arrived on time, no dents or scratches upon arrival. Got it shipped from the Canadian shipper so I didn't have to pay duty, was concerned about this as the reviews for this shipper were not as good as the one who ships form the States, but no need for concern, everything arrived just as it should and with zero damage. Fast and very easy to click together. Looks great. Love the stainless steel top. Don't know if it is waterproof yet as it hasn't rained. Could do with a shelf in the store cupboard. Will have to get some storage stacking boxes.
Kunde
2025-02-03 17:18:22
kann ich super gut als Vorbereitungstisch verwenden und im frühjahr auch als vorbereitungstisch für die Bepflanzung meines gartens.Der Rest ist halt Plastik, merkt man auch. Ist aber stabil. Was ich mir gewünscht hätte wäre noch eine teilung in Unterschrank.
Fi
2025-01-13 12:26:11
Needed a table for my new ninja bbq .. put together in less than an hour looks great . but 1 part broken . Left a message with the seeker so hopefully it will get sent out soon. .Other than that perfect size plenty of storagewould have given a 5 but part broken
Howiner
2024-11-19 20:13:22
Seems quite sturdy and went together reasonably well. However, a few of the snap in plastic tabs broke when trying to snap them in. So far it still seems to be OK. The thing that bugs me the most is that after we had it all assembled and put it in its little corner on our deck, I realized it would be better if the doors were on the other side so that we could turn it around and have the wheels in the corner first and still have the doors facing out. Not something we considered when building and we just followed the assembly instructions. Would be helpful if there is a reminder note in the instructions to consider the orientation of where it is to be stored so the wheels go in first (if necessary) and some hints on reversing the build orientation. Perhaps most people won't have this problem, but we certainly do!