Your cart is empty.
Your cart is empty.Product Description
Premium Grade High-density Special Blend of Polyurethane Construction
- Strength and durability
- Non-deformation and Impact resistance
- Anti-corrosion and aging resistance for long-lasting reliability
- Also included high quality plated steel OEM style body bushing sleeves and hardware
Jason r.
2025-08-28 13:34:00
I’ve bought 2 sets of these one for a 2008 and one for a 2013 they are probably stiffer then the factory rubber but I dont drive a truck for the comfort so they do what I need them to do
Sarah
2025-07-10 15:15:28
Couple of tips and tricks after doing this - 1. heat each bolt to break free the Loctite on the other end with a propane torch ~5 minutes (don't catch on fire - too much!). Torch is very easy to obtain and works great for campfires too - pencil torch and a common green Coleman tank. 2. Radiator mounts - hold both ends of the hardware on this one. (We waisted a lot of time with impact wrench and as soon as we held the other end - bingo it was removed.) Plan to spend 5+ hours to do all. Would have taken me much longer if my kiddo was not heating bolts and being the gopher while I was under the truck. All-in-all great product for the money!
Kim Rohe
2025-07-07 12:51:58
OK for the price but the rubber is much harder than the stock bushings, the hardware isn't the best. when removing the originals make sure to use plenty of penetrating oil and resist the urge to use an impact wrench especially up north where there will be rusted nuts where it will be very difficult to access. Do one side at a time.
terry
2025-04-22 14:04:32
Good product Great price
Danny
2025-04-10 12:11:42
I purchased these bushings based on the good reviews. After I paid to have them installed, they lasted about a week before they cracked. I now have to re-pay to have a better quality set of bushings installed….. This was an expensive lesson to learn. Please don’t make the same mistake I did..
Timothy
2025-02-27 14:05:23
Better than oem
Derek
2025-01-26 16:59:42
Giving a 3 to be generous. First off, they work and fit fine. They are of good quality for what they do. However, they are nearly rock hard. If you value your ride quality these are not the answer. They would be great for a mud truck or something like that but you can feel everything in the pedal, wheel and seat. These make your vehicle incredibly rough. I ended up spending the extra money and buying a set of the silicone mounts and they made a world of difference. The second issue with these is that they trap water and will eventually rust the bolts out. When I pulled these off to put the silicone ones on, water came out of several of them. The new silicone ones have a double o-ring on the stem that prevent this. Overall they work but spend the extra and get a good set of cab mounts.
Tony Osorio
2025-01-01 11:36:33
I replaced all my F-250 body mounts! Perfect fit and performance! Take your time to remove the old ones.
Recommended Products
$39.99
$ 20 .99 $20.99