Your cart is empty.
Your cart is empty.Expands from 14” x 14”(360mm x 360mm) to 36” x 36” (910mm x 910mm)square maximum and 20” x 52”(510 x 1320mm) rectangular maximum 700lb./320kg capacity Tough, powder coat finish Move anywhere with ease Fit most woodworking and metalworking machines Stable 4 wheel design Heavy duty 3” diameter swivel wheels with ball bearing Heavy duty 4” rear supporting wheels Easy operated lock system to lock machines to the floor
John Cole
2025-07-27 14:51:50
Using this on a 14" Jet bandsaw and the hardest part was getting the beast up on this by myself! Other than that, good quality!
LG in NC Mountains
2025-06-12 17:00:06
I spend a lot of time in my garage workshop. A few power tools are in fixed locations, but I try to make most things mobile, so I can put things where I need for my current project.I built a heavy stand for my benchtop drill press. I didn't plan to make it mobile, but I've realized it would be much more convenient if it was. I got this base to "mobilize" my custom-built base.The base is adjustable over a wide range, and it was easy to fit to my drill press base.The construction of the base is robust, and I expect it will prove durable.Two of the wheels always remain on the floor. The other end of the base rests on adjustable rubber "feet." To make it mobile, press the foot levers on the swivel wheels to lock them in the down position. Lifting the levers lowers the weight onto the rubber feet.My drill press rolls smoothly with the feet down, and feels secure enough when the feet are retracted. My drill press with a custom-made table and stand weigh less than 200 pounds. That is well below the load capacity of this base.Overall, I like the design and quality of this base.
Fred Powell
2025-05-14 16:08:50
This mobile base may be fine for a much smaller machine, but my machine weighs at the upper limit of this items specification and was impossible to push around my shop floor. It will not roll a 700 pound machine.
Jtcmedic
2025-04-17 17:26:18
It was easy to assemble, but it struggles with the saw I have, saw is lighter then max weight, but wheels alittle floppy, it is of for the price
nathan
2025-03-05 12:22:23
I now have four mobile bases like this, from three different manufacturers. I have them installed on my band saw, jointer, thickness planer, and now a fourth machine I'm building to strip paint off old boards (the base for which you can see in the pictures). They all work great. This one might even be a bit more heavy duty than the others.KEY FEATURES:*) 3†polyurethane swivel casters with dual ball bearings*) Oversized 4†plastic support wheels*) All steel constructionIf I needed another mobile base right now, I'd buy another of these without hesitation. It's a heck of deal for the current price of $65; I really don't think you'll find anything substantially better under $100.
Don D.
2025-02-22 11:17:27
Shipped promptly, seems very sturdy, a good buy for the money. Side supports seem to be a bit light for the rated load of this unit.
Tim Holland
2025-02-14 13:07:30
Once together, pretty stable and strong base, however, mosy.of the screw holes we factory drilled, some as much as 3/8" off so had to redrill. The ended up hitting ACE Hardware for axle bolts as the ones provided didnt each through the frame far enough to start the lock nuts on. Many of the frame bolts are just barely long enough to get a lock nut in. What should have taken around 30 mins to put together took all afternoon and a trip to the hardware store for 1/4" longer axle bolts. Again, good base once you coax it into a frame, but takes much more effort that it should due to poor quality engineering and hardware.
John Pietrowski
2025-02-01 18:03:53
AAAA++++
lutin
2025-01-08 17:08:27
Easy to assemble based on packaging but instructions were missing- however very solid construction, easy to expand to different size machine based with bolt system, simple mechanism for operating castors made moving heavy woodworking machines (bandsaw and pillar drill) easy.The mobile bases are easy to level so machines are safe for working . Ideal for maximising small workshop space.
Recommended Products
