Shopping Cart

Your cart is empty.

Your cart is empty.

Kohree Super Bright Led Trailer Light Kit, IP68 Waterproof Submersible Boat Trailer Lights, 12V Led Stop Turn Tail License Lights with Wiring Kit for Camper Truck RV Snowmobile Under 80 Inch

Free shipping on orders over $29.99

$30.99

$ 15 .99 $15.99

In Stock

About this item

  • Complete Trailer Light Kit: This trailer light kit serves 7 functions: brake, tail, turn signals, side marker, side reflector, rear reflector, and license plate light. Kit includes two stop turn signals LED lights, two amber lights, 25Ft wiring harness with 4 pin extension connector, a license plate bracket, 4 pcs complimentary reflective sticker, 6 wire nuts, 4 wire clip, studs and nuts, and 6 splice connector.
  • IP68 Waterproof: Fully sealed design, not afraid of wind and rain. Small trailer light kit, can work under long rainy days, foggy days, or heavy snow weather, effectively resisting the intrusion and the damage of sand, dust, dirt, water, snow, and other horrible weather.
  • DOT Compliant Standards: The 12V LED trailer lights are designed for applications under 80 Inch width towing vehicles, like trucks, trailers, boats, buses, Lorry, Van, caravans, snowmobiles, etc. The Kohree trailer lights are 100% compliant with DOT certification, this ensures that your lights are federally compliant.
  • Upgrade Design: New unique design for separating display of running and brake lights: circular ring “ON”—running lights; middle LED “ON” -- brake lights or turn signals. Last long and uses less energy than traditional standard incandescent lights. Superior Visibility, NO glares.
  • Surface Mount: With diodes soldered directly to the surface of a circuit board instead of attached with wires in the drilling-hole board, Kohree square marine trailer brake light kit protects LEDs from shock and vibration better than through-hole technology. Simply to use.



Product Description

trailer light kit

Kohree Super Bright Led Trailer Light with 2 marker side light

Why choose Kohree Square LED Submersible Trailer Tail Light Kit?

Designed for applications under 80 Inch width towing vehicles, like trucks, trailers, boats, buses, Lorry, Van, caravans, snowmobiles, etc. Shining even in a rough, tough environment.

Note: Please make sure wires connect correctly and no electronic short before underwater.

trailer light kit
trailer light kit
trailer light
trailer light kit
trailer light kit

Toni J
2025-08-28 13:17:25
Easy install and work great.
bawby
2025-08-17 16:25:48
My trailer lights were all worn out as well has the wiring harness. Bought this kit for the 7x12 trailer I have and these lights are far better than ones I had on the trailer. Well built, standard wiring for trailer lights and they are bright..... visible even on very sunny days. The bonus was that these are cheaper on Amazon than most of all the other led light kits they sell. My only ding on this set is the marker lights are L+R side screw mount were my original lights were center bolt mount. Not a big deal, just a little extra work mounting them. Would highly recommend.
Hex
2025-07-26 16:34:11
I'm not keen on the connectors included, but overall good lights. The circles come on with headlights. Plenty of wire as well. You could probably do a 12 ft trailer without having to splice in more wire. Just installed it so I can't speak to the quality.
Litesleeper
2025-06-05 17:09:46
LEDs are bright, work very well. All four lights have negative leads which need to be attached to battery negative, either with a wire or by drilling four new holes. I installed these lights on a galvanized trailer and didn’t drill new holes to make four more places to rust. This would be a much better kit if the white wire from the trailer plug were at least eight feet long to reach the “Y” in the frame to splice a wire running down each side.
Vincent clark
2025-05-17 16:49:55
, have had on trailer for a few years now the lights are extremely bright noticeable no issues at all with the lights the only thing I think could be a little bit better would be the quality of the wires that come with it and they're reflector but for the price that you pay you can't beat it with a stick and they're brighter than what you spend at $60 for two tail lights at Menards Home Depot or Tractor Supply by far I highly recommend this product if you have a boat trailer they are submersible I use a trailer year-round with these on there covered in snow and ice never have an issue highly recommend for the price and the quality usually when you buy something cheap you substitute quality but for this item particularly the price and the quality can't be beaten by anything or any other product I promise you that
Amanda
2025-05-12 17:32:24
6 year old Carry On purchased from TSC. As anyone well knows these are not made with quality in mind and the lights are probably the cheapest of the entire assembly. Too many times I would go to hitch up and one or multiple lights are not working. Add to this bulb sockets that are overly tight and corrode quickly to ensure blood along with sweat and tears when trying to get lighting back to legal compliance. The last time I needed to do this I ended up killing the turn signals indicating it was time for a rewire.Had seen this kit on Amazon before and kept it in the cart for future purchasing. Get a notification of a price drop so took the plunge.These lights are awesome and have breathed life into my cheapo trailer. FYI....fish tape will help tremendously to get the old wire out of the little conduits in the bed.
Jacob Vega
2025-04-28 16:24:51
Well worth the money for the price, LED on red lights are bright, and yellow lights on side are not to brigh.
W M.
2025-04-16 16:56:34
Now that they're installed these lights look good and appear to be reasonably well made. Kit comes with quick connectors - they work initially but allow water into wires and will rust out in no time. The proper way to make connections that will last is to use solder, silicone and heat shrink, but that takes a bit more skill and time.The wires are very short and each light has to be grounded to the trailer frame - very little space to work with. The wiring harness is designed to split and run independently down both sides of the trailer - my trailer is rectangular with the wiring harness running down the middle - required adding wire extensions to the side lights.The side lights are designed to mount flush with the two wires being run through a hole drilled into whatever surface the lights are mounted against. In my case I had to fabricate a block to use as a base and attach that to the side of the trailer, otherwise the light wires would have stuck out inside the body of my utility trailer.It's a minor thing but the wiring diagram is printed on a little piece of paper in a really tiny font.I can't comment on water integrity - don't plan to submerge and haven't exposed them to rain yet.
Filali
2025-04-13 16:52:53
Moyen
John Keane
2025-02-25 13:04:05
Word of caution. Make sure that these lights conform to the specific laws in your country. These laws differ in many of the countries within the EU states so check the regulations in your country.
Stwart
2025-02-02 13:01:17
The media could not be loaded.
czeslaw jordas
2025-01-10 14:39:36
the picture show all the correct illuminated color but on connection no turn signal showing but only in red. Straight forward replacements trailer lights old for your new ones. sad to say nice lights but crap presentation. J.
Eric L. MCCOOEYE
2024-12-03 16:18:41
Easy to install, no problems.
Recommended Products